Study of Meteorological Aspects and Urban Concentration of SO2 in Atmospheric Environment of La Plata, Argentina

This article presents and discusses SO₂ (ppbv) concentration measurements combined with meteorological data (mainly wind speed and direction) for a five-year campaign (1996 to 2000), in a site near an oil refinery plant close to the city of La Plata and surroundings (aprox. 740.000 inh.), considered one of the six most affected cities by air pollution in the country. Since there is no monitoring network in the area, the obtained results should be considered as medium term accumulated data that enables to determine trends by analyzing together gas concentrations and meteorological parameters. Preliminary characterization of the behaviour of the predominant winds of the region in relation with potential atmospheric gas pollutants from seasonal wind roses is possible to carry out from the data. These results are complemented with monthly averaged SO₂ measurements. In particular, for year 2000, pollutant roses were determined which enable predictions about contamination emission sources. As a general result we can state that there is a clear increase in annual SO₂ concentration and that the selected site should be considered as a key site for future survey monitoring network deployment. Annual SO₂ average concentration and prevailing seasonal winds determined in this work, together with the potential health impact of SO₂ reveals the need for a comprehensive and systematic study involving particulate matter an other basic pollutant gases.     

The use of Odonata species for environmental assessment: a meta-analysis for the Neotropical region

Environmental Science and Pollution Research - The order Odonata has been regularly used as an indicator of the ecosystem’s condition. The objective of this review was to analyze the...     

The antennal sensilla of Melipona quadrifasciata (Hymenoptera: Apidae: Meliponini): a study of different sexes and castes

The sensilla of insects are integumental units that play a role as sensory structures and are crucial for the perception of stimuli and for communication. In this study, we compared the antennal sensilla of females (workers and queens), males (haploid (n) and diploid (2n)), and queen-like males (QLMs, resulting from 2n males after juvenile hormone (JH) treatment) in the stingless bee Melipona quadrifasciata. Images of the dorsal antenna surfaces were acquired using a scanning electron microscope. As reported for other hymenopterans, this species exhibits a heterogeneous sensillar distribution along the antennae. Thirteen different types of sensilla were found in the antennae of M. quadrifasciata: trichodea (subtypes I to VI), chaetica (subtypes I and II), placodea, basiconica, ampullacea, coeloconica, and coelocapitula. Sensilla trichodea I were the most abundant, followed by sensilla placodea, which might function in olfactory perception. Sensilla basiconica, sensilla chaetica I, sensilla coeloconica, and sensilla ampullacea were found exclusively in females. In terms of the composition and size of the sensilla, the antennae of QLMs most closely resemble those of the 2n male, although QLMs exhibit a queen phenotype. This study represents the first comparative analysis of the antennal sensilla of M. quadrifasciata. The differences found in the type and amount of sensilla between the castes and sexes are discussed based on the presumed sensillary functions.     

Characterization of humic-rich hydrocolloids and their metal species by means of competing ligand and metal exchange--an on-site approach

An improved on-site characterization of humic-rich hydrocolloids and their metal species in aquatic environments was the goal of the present approach. Both ligand exchange with extreme chelators (diethylenetetraaminepentaacetic acid (DTPA), ethylendiaminetetraacetic acid (EDTA)) and metal exchange with strongly competitive cations (Cu(II) were used on-site to characterize the conditional stability and availability of colloidal metal species in a humic-rich German bogwater lake (Venner Moor, Münsterland). A mobile time-controlled tangential-flow ultrafiltration technique (cut-off: 1 kDa) was applied to differentiate operationally between colloidal metal species and free metal ions, respectively. DOC (dissolved organic carbon) and metal determinations were carried out off-site using a home-built carbon analyzer and conventional ICP-OES (inductively-coupled plasma-optical emission spectrometry), respectively. From the metal exchange equilibria obtained on-site the kinetic and thermodynamic stability of the original metal species (Fe, Mn, Zn) could be characterized. Conditional exchange constants Kex obtained from aquatic metal species and competitive Cu(II) ions follow the order Mn > Zn > > Fe. Obviously, Mn and Zn bound to humic-rich hydrocolloids are very strongly competed by Cu(II) ions, in contrast to Fe which is scarcely exchangeable. The exchange of aquatic metal species (e.g. Fe) by DTPA/EDTA exhibited relatively slow kinetics but rather high metal availabilities, in contrast to their Cu(II) exchange.     

Remediation with cyclodextrin: Recovery of the remedial agent by membrane filtration

Cyclodextrin‐enhanced flushing of contaminants from the subsurface is a promising innovative remediation technology. It will become more economically viable at more sites if methods can be developed to recover and reconcentrate the cyclodextrin solution after it has been flushed through an aquifer. The goal of this study was to determine if membrane technology is capable of meeting that need. Five membranes with different material properties were tested for this purpose in the laboratory. The results of these tests indicate that there are large differences both in the efficiency of these membranes to extract hydroxpropyl‐β‐cyclodextrin (HPCD) and their stability when exposed to trichloroethylene (TCE) at concentrations near aqueous solubility. Not only does the molecular weigh cutoff (MWCO) of a membrane determine if HPCD can be retained, but crucial selection criteria are the membrane's resistance and compatibility with TCE. Of the five membrane materials tested, only two (polymer composite membrane and polysulfone) met both these requirements. The polymer composite membrane (MPF‐44) showed reliable and stable HPCD recoveries (>95 percent) even when exposed to high TCE concentrations. The polysulfone membrane showed high HPCD recoveries, 88.5 ± 0.4 percent to 97 percent ±1 percent for ultrafiltration and nanofiltration membranes, respectively. However, membrane swelling and deterioration became a problem at high TCE concentrations (>1,000 mg/L). These problems diminished when the TCE concentration was less than 1 mg/L. Field tests demonstrated that batch mode treatment by ultrafiltration doubled the cyclodextrin concentration from 5 to 10 percent within three hours at a constant operating pressure of 13 psi. Under continuous single‐pass treatment conditions, cyclodextrin concentration also increased, although the rate of increase was much smaller than in batch mode. Overall, these tests showed that cyclodextrin recovery is possible under field conditions. © 2007 Wiley Periodicals, Inc.     

The fetal cerebellum. Pitfalls in diagnosis and management

Prenatal diagnosis of congenital and acquired cerebellar disorders is possible by the use of ultrasound (US) and magnetic resonance imaging (MRI). Although numerous studies have been conducted in this field, diagnostic uncertainties are still common in daily clinical practice. This review outlines five possible pitfalls in the diagnosis of fetal cerebellar disorders: confusion between different entities describing vermian pathologies (Dandy–Walker variant, vermian hypoplasia and vermian agenesis); premature diagnosis of abnormal vermian formation; difficulties in the ultrasonographic differentiation between the cerebellar hemispheres and the vermis; late development of cerebellar hypoplasia/atrophy and differential diagnosis of unilateral cerebellar findings. Copyright © 2009 John Wiley & Sons, Ltd.     

Ecodesign methods focused on remanufacturing

Understanding the product's ‘end-of-life’ is important to reduce the environmental impact of the products' final disposal. When the initial stages of product development consider end-of-life aspects, which can be established by ecodesign (a proactive approach of environmental management that aims to reduce the total environmental impact of products), it becomes easier to close the loop of materials. The ‘end-of-life’ ecodesign methods generally include more than one ‘end-of-life’ strategy. Since product complexity varies substantially, some components, systems or sub-systems are easier to be recycled, reused or remanufactured than others. Remanufacture is an effective way to maintain products in a closed-loop, reducing both environmental impacts and costs of the manufacturing processes. This paper presents some ecodesign methods focused on the integration of different ‘end-of-life’ strategies, with special attention to remanufacturing, given its increasing importance in the international scenario to reduce the life cycle impacts of products.     

Does ISO 14001 work in Brazil?

As a result of increasing global awareness about the importance of the environment, depletion of natural resources and legal pressures for companies to manage their processes in a sustainable manner, ISO 14001 systems have been gaining increasingly more importance in the organizational scenario. These elements are even more critical in emerging nations due to less awareness and fewer demands by governments and the population in relation to environmental issues. Therefore, the main objective of this study is to verify the benefits and difficulties of Environmental Management Systems based on ISO 14001 at industries in the state of São Paulo – Brazil (an emerging country) by conducting a survey to subsidize the proposal for actions in the public, academic and private sectors to promote the use of this standard of reference and strengthen its results in Brazil. A questionnaire was sent to 194 companies from the National Institute of Metrology, Standardization and Industrial Quality database. 69 answered, representing a return rate of 35.36%. The main benefits identified are related to the development of preventive environmental actions, reduction in the consumption of power, water, gas and fuel oil, and a positive influence on other internal management processes. The main difficulties are related to cost increases from ISO 14001 management systems and the constant changes in environmental legislation in Brazil. Some actions are proposed at the end of the analyses to intensify the use and improve the results of this standard, such as changes in government legislation and its collective development and implementation in industries.