Optimal charges on river effluent from lumped and distributed sources

We propose a modelling framework for the design of a Pigouvian effluent tax, in an environmental management problem implicating several economic agents located in a river basin. The proposed charging system allows for the agents' geographical position relative to the river's sections, at which environmental standards are to be enforced, and takes into account the possible different market structures within which the agents are operating. In particular, we consider industrial agents competing on an oligopolistic market, and a set of farmers acting as price takers on a large market. A regional authority's goal is to induce agents to some sort of cooperation which would result in the satisfaction of the common environmental constraints. The economic process on one side, and the pollution transport and accumulation on the other, constitute two dynamic processes in two different time scales. As the economic process is much slower than the other process we can neglect the latter's transients and concentrate on the time invariant steady state solutions to the transportation equation. The model thus constructed has some noncooperative game and optimal control problem's features with space being the ‘running’ variable. This revised version was published online in July 2006 with corrections to the Cover Date.     

The adaptive significance of male polymorphism in the acarid mite Caloglyphus berlesei

Summary Two forms of males occur in the acarid mite, Caloglyphus berlesei. One of them uses its thickened third pair of legs to kill other males; the other, without modified legs, does not attack other males. Previous studies have shown that the form of the male is environmentally determined: fighter males develop only at low population densities and their development can be suppressed by substances emanating from dense colonies. In this study, the duration of development, longevity and virility of the two male morphs were measured. The only significant difference was that fighters had a shorter development time between the two last moults. In another experiment, two groups of colonies were maintained under the same conditions but had different numbers of individuals: small colonies contained 2 fighters and 2 non-fighters, whereas large colonies contained 30 males of each type. The relative reproductive success of both morphs was estimated from numbers of matings. In small colonies, the estimated reproductive success (ERS) was significantly higher for fighters than for non-fighters, mainly because in over 50% of these colonies a single fighter male managed to kill all the rival males and monopolize the females. The opposite was true in large colonies, in which non-fighters achieved significantly higher ERS, mainly because the fighters were killed in fights more often than the non-fighters. This implies that the ratio of costs to benefits obtained by adopting the fighter-male strategy increases with the number of rival males, which may explain conditional male development in C. berlesei.     

Analytical insight into degradation processes of aminopolyphosphonates as potential factors that induce cyanobacterial blooms

Environmental Science and Pollution Research - Aminopolyphosphonates (AAPs) are commonly used industrial complexones of metal ions, which upon the action of biotic and abiotic factors undergo a...     

Field scale evaluation of volatile organic compound production inside biosecure swine mortality composts

Emergency mortality composting associated with a disease outbreak has special requirements to reduce the risks of pathogen survival and disease transmission. The most important requirements are to cover mortalities with biosecure barriers and avoid turning compost piles until the pathogens are inactivated. Temperature is the most commonly used parameter for assessing success of a biosecure composting process, but a decline in compost core temperature does not necessarily signify completion of the degradation process. In this study, gas concentrations of volatile organic compounds (VOCs) produced inside biosecure swine mortality composting units filled with six different cover/plant materials were monitored to test the state and completion of the process. Among the 55 compounds identified, dimethyl disulfide, dimethyl trisulfide, and pyrimidine were found to be marker compounds of the process. Temperature at the end of eight weeks was not found as an indicator of swine carcass degradation. However, gas concentrations of the marker compounds at the end of eight weeks were found to be related to carcass degradation. The highest gas concentrations of the marker compounds were measured for the test units with the lowest degradation (highest respiration rates). Dimethyl disulfide was found to be the most robust marker compound as it was detected from all composting units in the eighth week of the trial. Concentration of dimethyl disulfide decreased from a range of 290–4340 ppmv to 6–160 ppbv. Dimethyl trisulfide concentrations decreased to a range of below detection limit to 430 ppbv while pyrimidine concentrations decreased to a range of below detection limit to 13 ppbv.     

Optimisation of pressurised liquid extraction for elimination of sulphur interferences during determination of organotin compounds in sulphur-rich sediments by gas chromatography with flame photometric detection

A simple method for species-selective analysis of organotin compounds (OTCs) (butyl and phenyl) in sediments was developed. The sample preparation procedure was specifically optimised for sulphur-rich sediments to eliminate interferences from elemental sulphur and organosulphur compounds. Tin species were extracted from sediment samples using pressurised liquid extraction technique (PLE), ethylated - with simultaneous extraction to isooctane - in aqueous phase with sodium tetraethylborate (NaBEt(4)) and separated/detected by gas chromatography with flame photometric detection (GC-FPD). PLE operational variables (extraction temperature and pressure, solvent composition and number of static extraction steps) and extract handling routine were fine-tuned to minimise the amount of extracted interferents while keeping OTCs recovery at an acceptable level. Best results were obtained after extraction of sediment samples with methanol/water (75% v/v methanol) solution of acetic acid/sodium acetate with tropolone addition (0.6 g l(-1)). Derivatisation of low temperature, high-pressure (50 degrees C, 13.8 MPa) extracts gives isooctane extracts which are clean enough to be directly analysed by GC-FPD without any further cleanup. Interferences from elemental sulphur were completely eliminated while concentrations of other interferents were reduced to the level not impairing quantitation of OTCs under the study. No negative effects in terms of chromatographic column deterioration were observed after repeated injections of such extracts. Two certified reference materials, BCR646 and PACS-2, were analysed to assess performance of the method. Recoveries of all OTCs under the study, except MBT, were in the range of 91-114%. MBT extraction efficiency was low (34-47%) therefore the method is unsuitable for precise determinations of this compound.     

Chlorinated solvents in a petrochemical wastewater treatment plant: an assessment of their removal using self-organising maps

The self-organising map approach was used to assess the efficiency of chlorinated solvent removal from petrochemical wastewater in a refinery wastewater treatment plant. Chlorinated solvents and inorganic anions (11 variables) were determined in 72 wastewater samples, collected from three different purification streams. The classification of variables identified technical solvents, brine from oil desalting and runoff sulphates as pollution sources in the refinery, affecting the quality of wastewater treatment plant influent. The classification of samples revealed the formation of five clusters: the first three clusters contained samples collected from the drainage water, process water and oiled rainwater treatment streams. The fourth cluster consisted mainly of samples collected after biological treatment, and the fifth one of samples collected after an unusual event. SOM analysis showed that the biological treatment step significantly reduced concentrations of chlorinated solvents in wastewater.     

Laboratory-scale investigation of UV treatment of ammonia for livestock and poultry barn exhaust applications

The feasibility of using deep ultraviolet (UV) treatment for abatement of ammonia (NH(3)) in livestock and poultry barn exhaust air was examined in a series of laboratory-scale experiments. These experiments simulated moving exhaust air through an irradiation chamber with variables of UV wavelength and dose, NH(3) concentrations, humidity, and presence of hydrogen sulfide (H(2)S). Ammonia, initially at relevant barn exhaust concentrations in air, was substantially or completely reduced by irradiation with 185 nm light. Reactions were monitored using chemiluminescence detection, gas chromatography with mass spectrometry detection, and Fourier transform infrared spectrometry, of which the latter was found to be the most informative and flexible. Detected nitrogen-containing products included N(2)O, NH(4)NO(3), and HNO(3). It was presumed that atomic oxygen is the primary photochemical product that begins the oxidative cascade. The data show that removal of NH(3) is plausible, but they highlight concerns over pollution swapping due to formation of ozone and N(2)O.     

Concentration of bioactive compounds in mussels Mytilus galloprovincialis as an indicator of pollution

The polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organotins were analyzed in mussels Mytilus galloprovincialis from polluted and unpolluted sites from Mokpo Bay, Korea. The total PAH's concentrations (10(-3)mgkg(-1)) measured by GC-MS were in the range from 31+/-23 to 1+/-1. Among the eight PAHs the predominant ones were fluoranthene, phenanthrene and pyrene and accounted approximately 63% of the total PAHs. Among the four detected PCBs the highest content was of PCB 153, which accounted about 47% of the total PCBs. The main organotin compounds were dibutyltindichloride (DBT) and tributyltinchloride (TBT) and their composition was approximately 33% and 24%. PAHs, PCBs and organotins were found only in the mussels from polluted site. The antioxidant activity by ABTS [2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] test was higher in mussels from polluted than from unpolluted sites (P<0.05). It was found a correlation between the determined compounds (PAHs, PCBs and organotins) and the antioxidant activity of the mussel tissue from polluted site and the correlation coefficients were 0.96, 0.92 and 0.80, respectively. Such correlation can be explained by the properties of mussels. Since the mussel cell wall and tissues are hydrophobic, they can concentrate a number of hydrophobic pollutants like PAHs and PCBs from the marine environment by solubility rules. On the other hand, proteins are lipophilic compounds having antioxidant properties. Certain amino acid residues and thiol (-SH) groups, contained in proteins, respond to the ABTS antioxidant activity assay. Thus there may be a correlation between the total antioxidant activity of the organism and the PAH-PCB pollutants which were concentrated from its environment. The studied properties of mussels from polluted site can be used as an additional indicator of pollution.     

Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water–sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography–mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10⁴?l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water–sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.     

Empirical Estimation of Virtual Point Source Height Over a Bank of Coke Ovens

This paper addresses an empirical method of assessment of the height of a virtual point source. In order to achieve such assessment, three planes defining the location of a virtual point source in a space are created and formulas describing the geometry of observer’s sight and plume orientation are used. Data for calculations are obtained on a basis of plume photographs. The final position of a virtual emission point is described by a set of its coordinates in the Cartesian coordinate system. Presented method may be applied as a means to verify and validate the existing formulas describing the rise of plume above the stack exit or as a tool enabling acquisition of information for the sake of creating new formulas of this type. The calculation of the location of a virtual point source ascribed to the point emission from the roof of the bank of coke oven is presented and illustrated with photographs which reveal position of plume, adequate planes, axes and characteristic objects.