Urban heat island (UHI) influence on secondary pollutant formation in a tropical humid environment

The combined action of urbanization (change in land use) and increase in vehicular emissions intensifies the urban heat island (UHI) effect in many cities in the developed countries. The urban warming (UHI) enhances heat-stress-related diseases and ozone (O₃) levels due to a photochemical reaction. Even though UHI intensity depends on wind speed, wind direction, and solar flux, the thermodynamic properties of surface materials can accelerate the temperature profiles at the local scale. This mechanism modifies the atmospheric boundary layer (ABL) structure and mixing height in urban regions. These changes further deteriorate the local air quality. In this work, an attempt has been made to understand the interrelationship between air pollution and UHI intensity at selected urban areas located at tropical environment. The characteristics of ambient temperature profiles associated with land use changes in the different microenvironments of Chennai city were simulated using the Envi-Met model. The simulated surface 24-hr average air temperatures (11 m above the ground) for urban background and commercial and residential sites were found to be 30.81 ± 2.06, 31.51 ± 1.87, and 31.33 ± 2.1ºC, respectively. The diurnal variation of UHI intensity was determined by comparing the daytime average air temperatures to the diurnal air temperature for different wind velocity conditions. From the model simulations, we found that wind speed of 0.2 to 5 m/sec aggravates the UHI intensity. Further, the diurnal variation of mixing height was also estimated at the study locations. The estimated lowest mixing height at the residential area was found to be 60 m in the middle of night. During the same period, highest ozone (O₃) concentrations were also recorded at the continuous ambient air quality monitoring station (CAAQMS) located at the residential area.

Implications: An attempt has made to study the diurnal variation of secondary pollution levels in different study regions. This paper focuses mainly on the UHI intensity variations with respect to percentage of land use pattern change in Chennai city, India. The study simulated the area-based land use pattern with local mixing height variations. The relationship between UHI intensity and mixing height provides variations on local air quality.     

In vitro brain acetylcholinesterase response among three inbred strains of mice to monocrotophos.

The strain differences in the neurotoxic potential of monocrotophos (MCP) were assessed by determining the inhibition of brain acetylcholinesterase (AChE) in BALB/cAnN, DBA/2J and C57BL/6J in vitro. MCP being a competitive inhibitor for AChE, alters the Km values widely among these inbred strains. Comparatively least alterations in Km were found in BALB/cAnN and maximum in DBA/2J. Based on the Ki values DBA/2J was found to be the most sensitive strain to MCP inhibition followed by C57BL/6J and BALB/cAnN.     

Tree recruitment in an empty forest

To assess how the decimation of large vertebrates by hunting alters recruitment processes in a tropical forest, we compared the sapling cohorts of two structurally and compositionally similar forests in the Rio Manu floodplain in southeastern Peru. Large vertebrates were severely depleted at one site, Boca Manu (BM), whereas the other, Cocha Cashu Biological Station (CC), supported an intact fauna. At both sites we sampled small (> or =1 m tall, <1 cm dbh) and large (> or =1 cm and <10 cm dbh) saplings in the central portion of 4-ha plots within which all trees > or =10 cm dbh were mapped and identified. This design ensured that all conspecific adults within at least 50 m (BM) or 55 m (CC) of any sapling would have known locations. We used the Janzen-Connell model to make five predictions about the sapling cohorts at BM with respect to CC: (1) reduced overall sapling recruitment, (2) increased recruitment of species dispersed by abiotic means, (3) altered relative abundances of species, (4) prominence of large-seeded species among those showing depressed recruitment, and (5) little or no tendency for saplings to cluster closer to adults at BM. Our results affirmed each of these predictions. Interpreted at face value, the evidence suggests that few species are demographically stable at BM and that up to 28% are increasing and 72% decreasing. Loss of dispersal function allows species dispersed abiotically and by small birds and mammals to substitute for those dispersed by large birds and mammals. Although we regard these conclusions as preliminary, over the long run, the observed type of directional change in tree composition is likely to result in biodiversity loss and negative feedbacks on both the animal and plant communities. Our results suggest that the best, and perhaps only, way to prevent compositional change and probable loss of diversity in tropical tree communities is to prohibit hunting.     

Modeling accident occurrence at signalized tee intersections with special emphasis on excess zeros

In implementing effective remedial treatments at hazardous intersections, it often is necessary to identify the geometric and traffic factors that lead to accident occurrence. However, one particular problem frequently encountered in accident studies is how to distinguish virtually safe intersections with little likelihood of accident occurrence from those that have happened to have no accident due to the random process. To deal with this problem, the "excess" records of zero accident, the zero-inflated negative binomial was used to assign the probability to the accident outcome. Accident data at 104 signalized tee intersections in Singapore over a period of 9 years were employed for model development. The model indicates that uncontrolled left-turn slip road, permissive right-turn phase, existence of a horizontal curve, short sight distances, large number of signal phases, total approach volume, and left-turn volume may increase accident occurrence. On the other hand, right-turn channelization, acceleration section on the left-turn lane, median railings, and more than 5% approach gradient may reduce accident occurrence. Moreover, there is a trend of reducing accidents over the years.     

Loss of crop yields in India due to surface ozone: an estimation based on a network of observations

Surface ozone is mainly produced by photochemical reactions involving various anthropogenic pollutants, whose emissions are increasing rapidly in India due to fast-growing anthropogenic activities. This study estimates the losses of wheat and rice crop yields using surface ozone observations from a group of 17 sites, for the first time, covering different parts of India. We used the mean ozone for 7 h during the day (M7) and accumulated ozone over a threshold of 40 ppbv (AOT40) metrics for the calculation of crop losses for the northern, eastern, western and southern regions of India. Our estimates show the highest annual loss of wheat (about 9 million ton) in the northern India, one of the most polluted regions in India, and that of rice (about 2.6 million ton) in the eastern region. The total all India annual loss of 4.0–14.2 million ton (4.2–15.0%) for wheat and 0.3–6.7 million ton (0.3–6.3%) for rice are estimated. The results show lower crop loss for rice than that of wheat mainly due to lower surface ozone levels during the cropping season after the Indian summer monsoon. These estimates based on a network of observation sites show lower losses than earlier estimates based on limited observations and much lower losses compared to global model estimates. However, these losses are slightly higher compared to a regional model estimate. Further, the results show large differences in the loss rates of both the two crops using the M7 and AOT40 metrics. This study also confirms that AOT40 cannot be fit with a linear relation over the Indian region and suggests for the need of new metrics that are based on factors suitable for this region.     

An experimental study on usage of plastic oil and B20 algae biodiesel blend as substitute fuel to diesel engine

Usage of plastics has been ever increasing and now poses a tremendous threat to the environment. Millions of tons of plastics are produced annually worldwide, and the waste products have become a common feature at overflowing bins and landfills. The process of converting waste plastic into value-added fuels finds a feasible solution for recycling of plastics. Thus, two universal problems such as problems of waste plastic management and problems of fuel shortage are being tackled simultaneously. Converting waste plastics into fuel holds great promise for both the environmental and economic scenarios. In order to carry out the study on plastic wastes, the pyrolysis process was used. Pyrolysis runs without oxygen and in high temperature of about 250–300 °C. The fuel obtained from plastics is blended with B20 algae oil, which is a biodiesel obtained from microalgae. For conducting the various experiments, a 10-HP single-cylinder four-stroke direct-injection water-cooled diesel engine is employed. The engine is made to run at 1500 rpm and the load is varied gradually from 0 to 100 %. The performance, emission and combustion characteristics are observed. The BTE was observed to be higher with respect to diesel for plastic-biodiesel blend and biodiesel blend by 15.7 and 12.9 %, respectively, at full load. For plastic-biodiesel blend, the emission of UBHC and CO decreases with a slight increase in NO _x as compared to diesel. It reveals that fuel properties are comparable with petroleum products. Also, the process of converting plastic waste to fuel has now turned the problems into an opportunity to make wealth from waste.     

Recent advances in photocatalytic remediation of emerging organic pollutants using semiconducting metal oxides: an overview

Environmental Science and Pollution Research - Many untreated and partly treated wastewater from the home and commercial resources is being discharged into the aquatic environment these days, which...     

Removal of Cr(VI) from aqueous solution using waste weed, Salvinia cucullata

Biosorption studies of Cr(VI) were carried out using waste weed, Salvinia cucullata. Various adsorption parameters were studied, such as agitation speed, contact time, pH, particle size, and concentrations of adsorbent and adsorbate. The equilibrium was achieved in 12 h. A lower pH favoured adsorption of Cr(VI). The kinetics followed pseudo-second-order rate equations. The adsorption isotherm obeyed both the Langmuir and Freundlich models. The calculated activation energy (1.1 kJ mol^-1) suggested that the adsorption followed a diffusion-controlled mechanism. Various thermodynamic parameters such as Δ G^°, Δ H^°, and Δ S^° were also calculated. The positive values of enthalpy indicated the endothermic nature of the reaction, and Δ S^° showed the increasing randomness at the solid liquid interface of Cr(VI) on the adsorbent, which revealed the ease of adsorption reaction. These thermo-dynamic parameters showed the spontaneity of the reaction. The maximum adsorption of uptake (232 mg g^-1) compared well with reported values of similar adsorbents. The rate-determining step was observed to follow an intra-particle diffusion model.     

Assessment of methane from agricultural field during the entire paddy cropping seasons – a case study

A systematic effort was made to assess the emission of methane from paddy fields using closed chamber technique. Methane emission measurements were performed over a year during the Kharif (wet season), Rabi (dry season), and fallow periods. Various soil parameters like redox potential, organic carbon and ferrous ion were determined to evaluate their control on methane emissions. Diurnal measurement of the flux showed a minimum (0.44?mg?m^?2?h^?1) in the morning (8?a.m.), which increased gradually to a value of 1.16?mg?m^?2?h^?1 till the evening due to the rise in soil temperature. The seasonally integrated flux (E _SIF) for CH₄ was calculated. The E _SIF for methane during Kharif and Rabi crops were found to be 5.97?g?m^?2 and 2.59?g?m^?2, respectively. It was observed that the methane flux was maximum during flowering and fertilizer application stages for both paddy cropping seasons. The redox potential was low and the ferrous ion was higher during flowering and tiller stages. The methane emission was higher at E _AIF) was calculated for methane to make a budget estimate of methane emission from rice cultivated under rain fed drought prone water regime.