典型工业无组织源VOCs排放特征

选取制药厂、酿酒厂和橡胶厂分析了不同工艺过程VOCs排放特征.结果表明,制药厂安乃近合成和氨基比林合成的VOCs排放以苯、甲苯和苯乙烯等苯系物为主,乙酰氨基酚合成的VOCs排放主要以C4～C6的烷烃为主,酿酒厂和橡胶厂VOCs排放均以甲苯、乙苯和间,对二甲苯为主.采用最大增量反应活性法对臭氧生成潜势进行分析,制药厂安乃近合成和氨基比林合成VOCs单位臭氧生成潜势以苯、甲苯等苯系物为主;乙酰氨基酚合成以顺-2-丁烯、甲苯和异戊烷为主;酿酒厂、橡胶厂以甲苯、乙苯、间,对二甲苯为主.同时采用阈稀释倍数对VOCs进行恶臭分析,制药厂和酒厂无组织排放VOCs恶臭污染程度较轻,橡胶厂的伸缩装置车间和硫化车间的无组织VOCs排放存在一定程度的恶臭污染.     

二十年来渤海生态环境参数的演化和相互关系

通过系统分析近２０ａ来渤海中部海域３ａ（１９８２－１９８３，１９９２－１９９３，１９９８－１９９９年）１０航次的生态环境特征参数的变化，描述了变化趋势，初步讨论了各种特征参数之间的相互关系。研究发现，近２０ａ来，渤海中部营养盐的浓度和结构（Ｎ／Ｐ和Ｓｉ／Ｎ）均发生显著变化，表现为：硝酸盐、亚硝酸盐、总无机氮持续增加，活性磷和硅显著降低，Ｎ／Ｐ值升高，Ｓｉ／Ｎ值下降。Ｎ／Ｐ值３ａ的五月和十月平均值分     

长江口邻近海域沉积物中厌氧氨氧化细菌分布特征研究

海洋生态系统氮素循环对维持海洋生态收支平衡具有重要意义,由厌氧氨氧化细菌(anaerobic ammonia-oxidizing bacteria,ANAMMOX Bacteria)推动的厌氧氨氧化过程是海洋氮素移除的重要途径.本研究采用荧光定量PCR(q PCR)技术,并结合环境理化因子,分析了2011年夏季长江口邻近海域沉积物中厌氧氨氧化细菌的种群丰度分布特征.结果表明,厌氧氨氧化细菌的种群丰度在长江口邻近海域的空间分布与环境因子密切相关,总有机碳含量、盐度、铵盐浓度对长江口邻近海域沉积物中厌氧氨氧化细菌的种群丰度具有重要调控作用.厌氧氨氧化细菌的丰度分布与总有机碳含量呈显著正相关关系(P0.01,r=0.69),同时又随亚硝酸盐浓度、溶解氧浓度的升高而降低,而盐度对厌氧氨氧化细菌丰度分布的影响较为复杂.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.     

HPLC-ICP-MS在植物有机硒形态分析中的应用现状

植物是人们摄取硒的主要来源,富硒植物中富含可开发利用的有机硒,我国湖北恩施高硒地区富硒植物资源丰富亟待开发利用。植物中硒的形态分析是研究开发富硒植物资源的基础,而高效液相色谱与电感耦合等离子体质谱联用技术(HPLC-ICP-MS)是目前硒形态分析使用最为广泛的技术,它在样品的前处理、分析灵敏度、准确性等方面均具有优势,可以实现富硒植物中含硒生物大分子、硒形态以及与氨基酸结合位点及机理的分析。因此作者综述了植物样品的预处理过程,介绍了HPLC-ICP-MS联用技术在测定植物硒形态及其应用方面的研究成果,为我国富硒植物、富硒产品中硒形态的分析测定、开发富硒植物资源提供指导。     

环境应急监测工作现状存在的问题及对策研究

近年来,各类突发性环境污染事故时有发生,造成生命、财产的巨大损失和生态系统的严重破坏,这一问题引起了世界各国的高度重视.由于突发性污染事故具有爆发的突然性.危害的严重性以及影响的广泛性和长期性等特点,采取切实有效的措施来预防这类事故的发生以及提高对事故处理处置应变能力,已经成为环境保护一项非常重要的工作,因此建立健全有效的环境应急监测系统,加强各级环境监测站应急监测能力建设,提高其应急监测能力,意义十分重大.环境应急监测对于防范突发性环境污染事故,在事前预防、事中监测、事后恢复的各个过程中起着极其重要的作用,环境应急监测已成为环境监测的重要组成部分.本文系统地分析了我国环境应急监测工作现状,针对实际工作中存在的问题,提出了解决对策.     

Directions for combustion engine aerosol measurement in the 21st century

The Coordinating Research Council convened two Real-Time PM Measurement Workshops in December 2008 and March 2009 to take an intensive look at the current status and future directions of combustion aerosol measurement. The purpose was to examine the implications of parallel rapid developments over the past decade in ambient aerosol science, engine aftertreatment technology, and aerosol measurement methodology, which provide benefits and challenges to the stakeholders in air quality management. The workshops were organized into sessions targeting key issues in ambient and source combustion particulate matter (PM). These include (1) metrics to characterize and quantify PM, (2) the need to reconcile ambient and source measurements, (3) the role of atmospheric transformations on modeling emissions and exposures, (4) the impact of sampling conditions on PM measurement, and (5) the potential benefits of novel PM instrumentation. This paper distills the material presented by subject experts and the insights derived from the in-depth discussions that formed the core of each session. The paper's objectives are to identify areas of consensus that allow wider practical application of the past decade's advances in combustion aerosol measurement to improve emissions and air quality modeling, develop emissions reduction strategies, and to recommend directions for progress on issues in which uncertainties remain.     

基于稳健统计方法对实验室比对中土壤汞的质量控制指标研究

利用稳健四分位间距法和迭代法2种稳健统计方法,通过对全国31个省、自治区、直辖市范围内共334家环境监测单位开展土壤中汞的实验室间比对,对比对测定结果和质控数据进行统计分析,系统性地研究了土壤中汞的质量控制指标。建议实际监测工作中土壤汞的实验室间相对标准偏差范围为7%～19%,相对误差控制指标为±8%,低浓度水平下可适当放宽至±10%,加标回收率控制范围为81%～109%,为日常监测开展土壤汞的质量控制工作提供了评价依据,具有广泛的应用价值和较好的指导作用。     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

Ventilation for control of indoor air quality: A case study

Dilution of indoor air contaminants with less contaminated outdoor air is the most common strategy for control of indoor air quality. Unfortunately this strategy frequently imposes a substantial energy burden. If the contaminants are associated with occupants and their activities, a ventilation control system based on the carbon dioxide level in the controlled space is shown to relieve this energy burden. A test was carried out in the Fridley, MN, Junior High School Music Department to obtain air quality, energy, and subjective response data on an Automatic Variable Ventilation System. A control system with both CO₂ and temperature inputs was devised to control the use of outdoor air. Infiltration measurements lead to a quantitative measure of ventil3tion efficiency. This in turn led to recommendations for air circulation patterns in rooms. The measured ventilation efficiency enabled energy and CO₂ models to fit measured data. Energy savings of approximately 20% were found for this application. Subjective response of the occupants also was measured. A special questionnaire, subjected to statistical analysis, showed that the subjects felt warmer with increased CO₂ in the room air.