Characterization of particulate matter concentrations during controlled indoor activities

Indoor sources have been identified as a major contributor to the increase of particle concentration in indoor environments. The work presented here is a study of the characteristics of particulate matter number size distribution and mass concentration under controlled indoor activities in a laboratory room. The objective is to characterize particulate matter concentrations indoors resulted under the influence of specific sources. Measurements were performed in an empty laboratory (period September–October 2006) using a GRIMM SMPS+C system (particle size range between 11.1 and 1083.3 nm), a DustTrak Aerosol Monitor (TSI) and a P-Trak Ultrafine Particle Counter (TSI). The studied indoor activities included candle burning, hot plate heating, water boiling, onion frying, vacuuming, hair drying, hair spraying, smoking and burning of incense stick. The AMANpsd computer algorithm was used to evaluate the modal structure of measured particle number size distribution data. Furthermore, the change of the particle number size distribution shape under the influence of different emission sources was studied versus time. Finally the particle emission rates were computed. High particle number concentrations were observed during smoking, onion frying, candle burning and incense stick burning. The highest particle mass concentrations were measured during smoking and hair spraying. The shift of the particle size distribution to larger diameters suggests the presence of strong coagulation effect during candle burning, incense stick burning, smoking and onion frying. The size distribution was mainly bimodal during onion frying and candle burning, whereas the size distribution remained unimodal during incense stick burning and smoking experiments.     

Relationship of safety climate perceptions and job satisfaction among employees in the construction industry: the moderating role of age

This study examines the degree to which construction sector employees perceive that safety is important in their organizations/sites and how job satisfaction affects these perceptions when age is introduced as a moderator variable. Two-way analysis of variance demonstrated that job satisfaction has a strong effect on perceived management commitment to work safety and that this relationship was moderated by respondents’ age. Job satisfaction was associated with perceived accident rate and safety inspection frequency, but the proposed role of age in this linkage was not confirmed. Consequently, the findings indicated that by increasing the level of job satisfaction, perceptions of these safety climate aspects proved to be more positive. The conclusion is that these relationships could further lead to a lower percentage of accidents and injuries in the workplace and better health among employees. A significant relationship between job satisfaction, age and perceived co-workers’ commitment to work safety was not found.     

The impact of implementation of the requirements of Standard No. OHSAS 18001:2007 to reduce the number of injuries at work and financial costs in the Republic of Croatia

This article contains the results of research into the impact of implementation of the requirements mentioned in Standard No. OHSAS 18001:2007 to reduce the number of injuries at work and the financial costs incurred in this way. The study was conducted on a determined sample by a written questionnaire survey method in the Republic of Croatia. The objective of the empirical research is to determine the impact of implementation of the requirements of Standard No. OHSAS 18001:2007 to reduce the number of injuries at work and financial costs in Croatia in business organizations that implement these requirements. To provide a broader picture, the research included the collection and analysis of data on the impact of the Standard No. OHSAS 18001:2007 on accidents and fatalities at work. Research findings are based on the analysis of performed statistical data where correlation and regression analysis has been applied.     

Insight into selected emerging micropollutant interactions with wastewater colloidal organic carbon: implications for water treatment and analysis

Environmental Science and Pollution Research - This study reports how adding a membrane filter (0.45-μm cellulose nitrate filter) between a glass fibre filter and the solid phase extraction...     

Precipitation composition and wet deposition temporal pattern in Central Serbia for the period from 1998 to 2004

Bulk samples collected on a daily basis at three principal meteorological stations in central Serbia were analyzed on chloride (Cl(-)), nitrate [Formula: see text], sulfate [Formula: see text], sodium (Na(+)), ammonium [Formula: see text], potassium (K(+)), calcium (Ca(2+)), and magnesium (Mg(2+)) in addition to precipitation amount, pH and conductivity measurements over the period 1998-2004. The data were subjected to variety of analyses (linear regression, principal component analysis, time series analysis) to characterize precipitation chemistry in the study area. The most abundant ion was [Formula: see text] with annual volume weighted mean concentration of 242 microeq L(-1). Neutralization of precipitation acidity occurs both as a result of the dissolution of alkaline compounds containing Ca(2+), Mg(2+), and K(+) as well as the absorption of ammonia. The ratio of [Formula: see text] was above 5, which indicated that the combustion process of low-grade domestic lignite for electricity generation from coal-fired thermal power plants was the main source of pollution in the investigated area. A considerable mean annual bulk wet deposition of SO(4)-S determined by precipitation amount and concentrations of sulfate in the precipitation was calculated to be 12-35 kg ha(-1).     

Photocatalytic reduction of carbon dioxide over Cu/TiO<Subscript>2</Subscript> photocatalysts

The photocatalytic reduction of CO₂ with H₂O was investigated using Cu/TiO₂ photocatalysts in aqueous solution. For this purpose, Cu/TiO₂ photocatalysts (with 0.2, 0.9, 2, 4, and 6 wt.% of Cu) have been synthesized via sol-gel method. The photocatalysts were extensively characterized by means of inductively coupled plasma optical emission spectrometry (ICP-OES), N₂ physisorption (BET), XRD, UV-vis DRS, FT-IR, Raman spectroscopy, TEM-EDX, and photoelectrochemical measurements. The as-prepared photocatalysts contain anatase as a major crystalline phase with a crystallite size around 13 nm. By increasing the amount of Cu, specific surface area and band gap energy decreased in addition to the formation of large agglomeration of CuO. Results revealed that the photocatalytic reduction of CO₂ decreased in the presence of Cu/TiO₂ in comparison to pure TiO₂, which might be associated to the formation of CuO phase acting as a recombination center of generated electron-hole pair. Decreasing of photoactivity can also be connected with a very low position of conduction band of photocatalysts with high Cu content, which makes H₂ production necessary for CO₂ reduction more difficult.     

Determination of microbiological contamination,antibacterial and antioxidant activities of natural plant hazelnut (Corylus avellana L.) pollen

The aim of our study is to determine microbial contamination, antibacterial and antioxidant activities of 14 pollen samples of Corylus avellana collected from different locations in Slovakia. Microbiological analysis was carried out in two steps: microbiological assays and studies of antibacterial activity of pollen extracts. The antimicrobial properties of pollen extracts were carried out with the disc-diffusion method. Methanol (70%), ethanol (70%) and distilled water were used for pollen extracts. Five strains of bacteria such as gram-negative (Salmonella enterica subsp. enterica CCM 3807, Escherichia coli CCM 2024, and Yersinia enterocolitica CCM 5671) and gram-positive (Staphylococcus aureus CCM 2461 and Bacillus thuringiensis CCM 19T) were tested. Antioxidant activity of pollen extracts was determined by the DPPH method. Bacterial analysis includes the determination of the total bacterial count ranged from 4.08 to 4.61 log CFU g^?1, mesophilic aerobic bacteria ranged from 3.40 to 4.89 log CFU g^?1, mesophilic anaerobic bacteria ranged from 3.20 to 4.52 log CFU g^?1, coliform bacteria ranged from 3.30 to 4.55 log CFU g^?1, yeasts and filamentous fungi ranged from 3.00 to 3.56 log CFU g^?1. Microscopic filamentous fungi Aspergillus spp., Alternaria spp., Penicillium spp., Cladosporium spp., Rhizopus spp., and Paecylomyces spp. were isolated from hazelnut pollen. Yersinia enterocolitica was the most sensitive strain among ethanolic and methanolic pollen hazelnut extracts. Staphylococcus aureus was the most sensitive strain against aqueous hazelnut pollen extracts. We determined the following sensitivity against ethanol pollen extracts respectively: Yersinia enterocolitica?>?Salmonella enterica?>?Staphylococcus aureus?>?Bacillus thuringiensis?>?Escherichia coli. Methanol pollen extracts had shown following sensitivity: Yersinia enterocolitica?>?Salmonella enterica?>?Escherichia coli?>?Staphylococcus aureus?>?Bacillus thuringiensis. Aqueous extracts had shown the following sensitivity: Staphylococcus aureus?>?Salmonella enterica?>?Escherichia coli?>?Bacillus thuringiensis?>?Yersinia enterocolitica. Hazelnut pollen extracts have over 82% antioxidant capacity in samples from non-urban zones. An elevated level of antioxidant potential in the pollen is determined by its biological properties conditioned by biologically active substances. DPPH method allowed characterizing pollen as a source of antioxidants.     

Impact of industrial pollution on Scots pine (Pinus sylvestris L.) radial growth in the areas of mineral fertilizer factory “Achema”

The aim of research was to assess the changes of annual radial increment of Scots pine forests in the vicinity of intensive and moderate industrial pollution of “Achema” factory producing mineral fertilizers. Our results indicate that the radial growth of the pine tree can be divided into three different periods: growth promotion, growth inhibition and growth recovery. Low levels of nitrogen emissions were beneficial for tree growth: the radial increment in the intensive and moderate pollution zones increased by 15–25% and 10%, respectively compared to control. During the growth inhibition period, the total annual industrial emission was 37–40 kt, and 40–45% radial growth loss was observed for the closest and 15–20% for the most distant stands. The radial growth decrease slowed down and the recovery of damaged stands began in 1990–1992 then air pollution was considerably reduced. The rate of forest recovery was high for the most damaged stands: their radial growth was close to control in 2000–2011.     

The use of polymer compounds in the deposits from the combustion of briquettes in domestic heating as an identifier of fuel quality

Environmental Science and Pollution Research - The utilisation of waste wood from furniture production brings new problems connected with an incomplete thermochemical decomposition of additives...