Modeling Acidification Recovery on Threatened Ecosystems: Application to the Evaluation of the Gothenburg Protocol in France

To evaluate the acid deposition reduction negotiated for 2010 within the UNECE LRTAP Gothenburg Protocol, sulphur and nitrogen deposition time-series (1880–2100) were compared to critical loads of acidity on five French ecosystems: Massif Central basalt (site 1) and granite (2); Paris Bassin tertiary sands (3); Vosges mountains sandstone (4) and Landes eolian sands (5). The SAFE model was used to estimate the response of soil solution pH and ratio to the deposition scenario. Among the five sites, critical loads were exceeded in the past at sites 3, 4 and 5. Sites 3 and 4 were still expected to exceed in 2010, the Protocol year. Further reduction of atmospheric deposition, mainly nitrogen, would be needed to achieve recovery on these ecosystems. At sites 3, 4 and 5, the delay between the critical load exceedance and the violation of the critical chemical criterion was estimated to be 10 to 30 years in the top soil and 50 to 90 years in the deeper soil. At site 5, a recovery was expected in the top soil in 2010 with a time lag of 10 years. Unexpectedly, soil pH continued to decrease after 1980 in the deeper soil at sites 2 and 5. This time lag indicated that acidification moved down the soil profile as a consequence of slow base cation depletion by ion exchange. This delayed response of the soil solution was the result of the combination of weathering rates and vegetation uptake but also of the relative ratio between base cation deposition and acid compounds.     

Effects of Acid Rain on Competitive Releases of Cd, Cu, and Zn from Two Natural Soils and Two Contaminated Soils in Hunan, China

Leaching experiments of rebuilt soil columns with two simulated acid rain solutions (pH 4.6–3.8) were conducted for two natural soils and two artificial contaminated soils from Hunan, south-central China, to study effects of acid rain on competitive releases of soil Cd, Cu, and Zn. Distilled water was used in comparison. The results showed that the total releases were Zn>Cu>Cd for the natural soils and Cd>Zn≫Cu for the contaminated soils, which reflected sensitivity of these metals to acid rain. Leached with different acid rain, about 26–76% of external Cd and 11–68% external Zn were released, but more than 99% of external Cu was adsorbed by the soils, and therefore Cu had a different sorption and desorption pattern from Cd and Zn. Metal releases were obviously correlated with releases of TOC in the leachates, which could be described as an exponential equation. Compared with the natural soils, acid rain not only led to changes in total metal contents, but also in metal fraction distributions in the contaminated soils. More acidified soils had a lower sorption capacity to metals, mostly related to soil properties such as pH, organic matter, soil particles, adsorbed SO₄ ²⁻, exchangeable Al³⁺ and H⁺, and contents of Fe₂O₃ and Al₂O₃.     

Canopy influence on trace metal atmospheric inputs on forest ecosystems: Speciation in throughfall

Atmospheric inputs of selected Trace Metals (TM: Cd, Cu, Ni, Pb, Sb, Zn, as well as Al, Fe and Mn) were studied on six forested sites in France. In order to evaluate canopy interaction with atmospheric inputs, TM were measured in both Open Field Bulk Deposition (BD) and Throughfall (TF). Anthropogenic contribution to BD composition is high for Zn, Cd and Sb, reflecting actual TM emissions trends. Canopy greatly influences precipitation composition, through different processes, including assimilation and leaching by canopy, complexation as well as accumulation/dissolution of dry deposition. TM and Dissolved Organic Carbon (DOC) physical fractionation between colloidal and truly dissolved phases was performed with ultrafiltration. Al, Fe, Pb and Cu are found in the colloidal fraction whereas Cd, Ni, Zn and Sb are mostly in the truly dissolved fraction. Chemical speciation predicted with WHAM-VI shows that in throughfall, Al, Fe, Pb and Cu are almost entirely complexed by DOC, whereas Ni, Cd and Zn are present in average 30% in the free metal ion form. TM present in labile forms (Cd, Ni, Zn) interact with the canopy, are cycled in the ecosystem, and their concentration is either slightly increased or even decreased in throughfall. Sb, Pb and Cu concentration are increased through canopy, as a consequence of dry deposition accumulation.     

Influence of support on catalytic behavior of nickel catalysts in the steam reforming of ethanol for hydrogen production

Al₂O₃, MgO, SiO₂ and ZnO-supported nickel catalysts were prepared and evaluated in the ethanol steam reforming for hydrogen production. It is shown that the catalytic behavior can be influenced depending on the experimental conditions employed and chemical composition of the catalyst.     

Riverine transfer of heavy metals from Patagonia to the southwestern Atlantic Ocean

The occurrence and geochemical behaviour of Fe, Mn, Pb, Cu, Ni, Cr, Zn and Co are studied in riverine detrital materials transported by Patagonian rivers. Their riverine inputs have been estimated and the nature of these inputs to the Atlantic Ocean is discussed. Most of the metals are transported to the ocean via the suspended load; there is evidence that Fe oxides and organic matter are important phases controlling their distribution in the detrital non-residual fraction. Most heavy metal concentrations found in bed sediments, in suspended matter, and in the dissolved load of Patagonian rivers were comparable to those reported for non-polluted rivers. There is indication that human activity is altering riverine metal inputs to the ocean. In the northern basins – and indicating anthropogenic effects – heavy metals distribution in the suspended load is very different from that found in bed sediments. The use of pesticides in the Negro River valley seems correlated with increased riverine input of Cu, mostly bound to the suspended load. The Deseado and Chico Rivers exhibit increased specific yield of metals as a consequence of extended erosion within their respective basins. The Santa Cruz is the drainage basin least affected by human activity and its metal-exporting capacity should be taken as an example of a relatively unaffected large hydrological system. In contrast, coal mining modifies the transport pattern of heavy metals in the Gallegos River, inasmuch as they are exported to the coastal zone mainly as dissolved load. Electronic Publication     

Complex toxic effects of Cd2+, Zn2+, and acid rain on growth of kidney bean (Phaseolus vulgaris L)

Complex toxic effects of Cd2+, Zn2+, and acid rain on growth of kidney bean (Phaseolus vulgaris L) were studied in a pot experiment by measurement of fresh weights of the plants, determination of surperoxide dismutase (SOD), peroxidase (POD), and lipid peroxidation (MDA) in the plant organs, and observation of injury symptoms. The experimental results demonstrated that all treatments of Cd2+, Zn2+, and/or acid rain significantly decreased fresh weights of kidney bean and caused toxic effects on growth of the plants, especially higher amounts of Cd2+ and Zn2+ and higher acidity of acid rain. Combination of these three pollutant factors resulted in more serious toxic effects than any single pollutant and than combinations of any two pollutants. SOD, POD, and MDA in the plant organs changed with different pollution levels, but MDA content in the leaves showed the best relationship between the pollution levels and toxic effects.     

Background levels of heavy metals in surficial sediments of the Gulf of Lions (NW Mediterranean): an approach based on 133Cs normalization and lead isotope measurements

This paper presents an attempt to reach natural background levels of heavy metals in surficial sediments of the Gulf of Lions (NW Mediterranean). To correct for the grain-size effect, normalization procedures based on a clay mineral indicator element are commonly used, after a first grain size separation by sieving. In our study, we tested the applicability of this method with respect to commonly used normalizer elements, and found that stable Cs shows the best ability to reflect the fine sediment fraction. Background levels were successfully reached for Co, Cr, Cu, Ni and Pb, compared to various literature references. Nevertheless, in the case of lead, the normalized data depicted a general enrichment in all samples, and the natural levels could only be reached when concentrations were corrected for the atmospheric contribution by analysing lead isotope ratios. Also for Zn, a general enrichment was found in our samples, although less important.     

Modelling of CO2 arrival time at Ketzin – Part I

The injection of CO₂ at the Ketzin storage site and the chemical detection of its arrival in the observation well allowed testing of different numerical simulation codes. ECLIPSE 100 (E100, black-oil simulator), ECLIPSE 300 (E300, compositional CO₂STORE) and MUFTE-UG were used for predictive modelling applying a constant injection rate of 1 kg s^?1 CO₂ and for a history match applying the actual variable injection rate which ranged from 0 to 0.7 kg s^?1 and averaged 0.23 kg s^?1. The geological model applied, is based on all available geophysical and geological information and has been the same for all programs.The results of the constant injection regime show a good agreement among the programs with a discrepancy of 21–33% for the CO₂ arrival times. However, it is determined from the comparison of the cumulative mass of CO₂ at the time of CO₂ arrival that the injection regime is an important factor for the accurate prediction of CO₂ migration within a saline aquifer. Comparing the actual variable injection regime with the simulations applying a constant injection rate the results are relatively inaccurate.Regarding the actual variable injection regime, which was evaluated using all three simulators, the computational results show a good agreement with the data actually measured at the first observation well. Here, the calculated arrival times exceeded the actual ones by 8.1% (E100), 9.2% (E300) and 17.7% (MUFTE-UG).It can be concluded that irrespective of the deviations of the simulations, due to combinations of different codes and slight differences in input parameters, all three programs are well equipped to give a reliable estimate of the arrival of CO₂. Deviations in the results mainly occur due to different input data and grid size choices done by the different modelling teams working independently of each other. Deviations of the simulations results compared to the actual CO₂ arrival time result from uncertainties in the implementation of the geological model, which was set up based on well log data and analogue studies.