对煤矿企业主体——职工安全问题的探讨

众所周知,在煤矿企业生产过程中,职工安全能力是否增强、作业行为是否规范、安全素质是否提高与煤矿企业安全生产有着非常直接的关系.因此,如何依托职工,促进煤矿企业安全生产一直是广泛关注的问题.     

双室微生物燃料电池重金属毒性传感器的研制

构建了双室微生物燃料电池（double microbial fuel cells,DMFC）型毒性传感器分别对Cr（Ⅵ）、Cd2+、Cu2+、Zn2+进行在线检测研究。通过对反应器进行优化,确定DMFC在外电阻为1 000 Ω时达到最大功率密度;外循环速率为0.933 4 mL·min-1时反应器运行较稳定。在最优条件下,通过监测铜离子来确定检测时间为60 min,清洗时间为10 min。在以上条件下进行重金属检测,结果表明4种重金属的检测范围分别为0.3~10、0.4~10、40~160、15~80 mg·L-1。抑制率可以用来验证反应器的可行性,检测范围内抑制率与重金属浓度呈现一定的线性关系,其相关系数分别为0.959 7、0.979 5、0.944 1、0.936 6。并可得到相应的线性方程,这些方程可用于验证DMFC-传感器的稳定性。选取检测范围内的浓度进行验证,结果表明4种重金属的相对误差均小于11%,传感器相对稳定并可长期运行。     

OilTech121便携式测油仪在突发性水污染事件中的应用

应用OilTech121便携式测油仪对某突发性水污染事件的小溪沟、长江水样进行石油类浓度检测,分析其石油类浓度沿程变化情况以及对小溪沟、长江水质的影响。结果表明,受含油废水的影响,小溪沟明显受到污染,入溪口d2石油类浓度高达24.9 mg/L,围油栏和吸油毡组成的拦截带对石油类的吸附处置效果明显,4道拦截带的油污拦截效率分别达到41%、34%、28%和18%,此外,长江水质也受到一定程度的影响,但下游水厂取水口水质未受污染,无需中断水厂取水。鉴于该仪器具有携带方便、操作简单、检测速度快等优点,并为判断拦截带吸附处置效率、水厂取水是否安全等重要决策领域提供了大量及时的第一手数据,建议在突发性水污染事件石油类浓度检测及预警中推广使用。     

2010—2019年成都市机动车排污特征分析及防控措施减排效果评估

为评估2010—2019年成都市机动车防控措施的减排效果,以2010年为基准年,采用排放清单法计算了各减排措施下2019年的减排量,对比分析了4种控制措施的减排效益。结果表明：成都市机动车排污总量逐年下降,2019年PM_2.5、NO_x、VOCs、CO、SO₂和NH₃的排放量分别为0.27×10⁴、4.63×10⁴、1.70×10⁴、28.99×10⁴、0.21×10⁴和0.45×10⁴ t,主要分布在中心城区,其中重型货车对PM_2.5和NO_x贡献最大,小型客车对VOCs、CO、SO₂和NH₃贡献最大;措施中加严标准的综合减排量最大,重点减排车型为小型客车、轻型货车、公交车等,2019年6种污染物减排量分别为0.14×10⁴、2.27×10⁴、1.29×10⁴、6.77×10⁴、0.07×10⁴和0.38×10⁴ t;优化城市交通管理对小型客车和摩托车的减排效果显著,2019年6种污染物减排量分别为0.04×10⁴、0.81×10⁴、0.38×10⁴、2.55×10⁴、0.05×10⁴和0.04×10⁴ t;淘汰高排放车辆对小型客车、轻型货车等的减排较明显,2019年6种污染物减排放量分别为0.13×10⁴、0.98×10⁴、0.34×10⁴、2.62×10⁴、0.01×10⁴和0.007×10⁴ t;推广清洁能源汽车的重点减排车型为出租车和公交车,虽然可有效减少PM_2.5、NO_x的排放,但VOCs却有小幅增加,2019年6种污染物减排放量分别为0.12×10⁴、0.62×10⁴、−0.13×10⁴、0.30×10⁴、0.004×10⁴和0.000 5×10⁴ t。     

不同碳源下缺氧/好氧连续流系统生物除磷效果及其机理

为了考察前期发现的以淀粉为唯一碳源、缺氧好氧生物脱氮系统对含多种有机物的废水中磷的脱除,在以淀粉为唯一碳源、已能稳定生物除磷(除磷率达72％)的缺氧好氧连续流生物脱氮系统中,改变进水碳源组成及浓度,测定了系统对磷去除的变化、分析了系统除磷与进水碳源的关系.结果 表明,在进水中淀粉浓度保持为400 mg·L-1(以COD...     

Effects of environmental regulation on firm entry and exit and China’s industrial productivity: a new perspective on the Porter Hypothesis

Environmental Economics and Policy Studies - This paper dissects the effects of environmental regulation on the productivity of pollution-intensive industries and by doing so offers a new...     

Review on China’s wind power policy (1986–2017)

As an important renewable energy source, wind power plays a key role in mitigating climate change and has become one of the fastest growing clean energies globally. In China, wind energy development has been a vital component of national energy transformation strategy. Over the years, the Chinese government has introduced a series of policies to promote the development of wind power and also to regulate this emerging industry. Base on examining all the key policy documents on wind power issued by the Chinese government over the last 30 years, we find that China has built up a comprehensive policy system, and summarized the current framework of Chinese wind power policy systematically. Then, we analyze the policy objectives, policy tools, major measures, their results in each development stage, and the characteristics and trends of China’s wind power policies. Finally, we discuss the limitations of the current policy and put forward corresponding suggestions.

     

中亚热带次生林成林规律及经营技术研究——Ⅱ.次生林的演替规律

本文研究了湖南省中亚热带次生林的种群动态,建立了静态生命表、存活曲线、结构模型以及材积或生物量动态模型,提出了中亚热带次生林的演替基本模式。     

碳汇造林项目促进了当地经济发展吗?--基于四川县域面板数据的PSM-DID实证研究

林业是重要的碳汇资源,在减缓全球气候变化、改善自然生态环境、促进经济可持续发展等方面有着至关重要的作用。作为林业碳汇的重要实现形式,碳汇造林项目兼具生态保护、促进经济发展与贫困减缓等重要功能,其实施成效究竟如何需要进一步验证。为此,本文从理论上分析了碳汇造林项目对县域经济发展的影响机理,利用2000—2016年四川47个县域的面板数据,采用PSM-DID模型估计了碳汇造林项目对县域经济发展的平均效应和动态效应,并对其影响机理进行了验证。结果显示:①碳汇造林项目的实施显著地促进了地区实际GDP和人均实际GDP的增长,这一结论在进行稳健性检验后依然成立;②囿于项目周期较长,此促进作用在短期内尚不能立竿见影,具有明显的滞后效应,且实施的时间越长,对当地经济发展的促进作用越大;③碳汇造林项目主要通过优化当地产业结构、提高居民储蓄率、提升地区政府财政收支水平等途径促进当地经济发展。因此,为更好地发挥碳汇造林项目对县域经济发展的促进作用,应继续拓展碳汇造林项目的覆盖区域,加大专项投资力度,引导碳汇造林项目向生态脆弱的深度贫困地区倾斜;在更加注重碳汇造林项目的长期效应的同时,应建立完善项目运行的长效稳定机制,防范潜在的自然与市场风险,保障项目对地区经济发展的长期驱动力;加快改善地区的融资环境,鼓励居民和企业将储蓄和融资能力有效转化为投资能力,充分依托碳汇造林项目促进当地经济可持续发展。     

Increasing the recovery of heavy metal ions using two microbial fuel cells operating in parallel with no power output

The present study aimed to improve the performance of microbial fuel cells (MFCs) by using an intermittent connection period without power output. Connecting two MFCs in parallel improved the voltage output of both MFCs until the voltage stabilized. Electric energy was accumulated in two MFCs containing heavy metal ions copper, zinc, and cadmium as electron acceptors by connection in parallel for several hours. The system was then switched to discharge mode with single MFCs with a 1000-Ω resistor connected between anode and cathode. This method successfully achieved highly efficient removal of heavy metal ions. Even when the anolyte was run in sequencing batch mode, the insufficient voltage and power needed to recover heavy metals from the cathode of MFCs can be complemented by the developed method. The average removal ratio of heavy metal ions in sequencing batch mode was 67 % after 10 h. When the discharge time was 20 h, the removal ratios of zinc, copper, and cadmium were 91.5, 86.7, and 83.57 %, respectively; the average removal ratio of these ions after 20 h was only 52.1 % for the control group. Therefore, the average removal efficiency of heavy metal ions increased by 1.75 times using the electrons stored from the bacteria under the open-circuit conditions in parallel mode. Electrochemical impedance data showed that the anode had lower solution resistance and polarization resistance in the parallel stage than as a single MFC, and capacitance increased with the length of time in parallel.