Household solid waste generation and characteristic in a Mekong Delta city,Vietnam

This study was undertaken to evaluate the quantity and composition of household solid waste to identify opportunities for waste recycling in Can Tho city, the capital city of the Mekong Delta region in southern Vietnam. Two-stage survey of 100 households was conducted for dry season and rainy season in 2009. Household solid waste was collected from each household and classified into 10 physical categories and 83 subcategories. The average household solid waste generation rate was 285.28 g per capita per day. The compostable and recyclable shares respectively accounted for 80.02% and 11.73%. The authors also analyzed the relations between some socioeconomic factors and household solid waste generation rates by physical categories and subcategories. The household solid waste generation rate per capita per day was positively correlated with the population density and urbanization level, although it was negatively correlated with the household size. The authors also developed mathematical models of correlations between the waste generation rates of main physical categories and relevant factors, such as household size and household income. The models were proposed by linear models with three variables to predict household solid waste generation of total waste, food waste, and plastic waste. It was shown that these correlations were weak and a relationship among variables existed. Comparisons of waste generation by physical compositions associated with different factors, such as seasonal and daily variation were conducted. Results presented that the significant average differences were found by the different seasons and by the different days in a week; although these correlations were weak. The greenhouse gas baseline emission was also calculated as 292.25 g (CO₂ eq.) per capita per day from biodegradable components.     

Models for waste life cycle assessment: Review of technical assumptions

A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results from different LCA studies can be consistent. This paper is an attempt to identify, review and analyse methodologies and technical assumptions used in various parts of selected waste LCA models. Several criteria were identified, which could have significant impacts on the results, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing waste LCA models.This review infers that some of the differences in waste LCA models are inherent to the time they were developed. It is expected that models developed later, benefit from past modelling assumptions and knowledge and issues. Models developed in different countries furthermore rely on geographic specificities that have an impact on the results of waste LCA models. The review concludes that more effort should be employed to harmonise and validate non-geographic assumptions to strengthen waste LCA modelling.     

Assessing the probability of land submergence for lowland rice cultivation in Africa using satellite imagery and geospatial data

Sub-Saharan African countries are being strongly urged to enhance their rice production, because their rice consumption and importation rates have been rapidly increasing in recent years. Areas planted to rice in Africa are classified agro-ecologically into rainfed upland, rainfed lowland, and irrigated. Rainfed lowland includes extensive areas of unexploited land that has great potential for the promotion of rice growing. For the unexploited rainfed lowlands of Ghana, we have been studying the development of low-cost rice-farming systems that require no large-scale irrigation or land reclamation. For such systems, it is important to select suitable areas where water for rice farming can be obtained naturally; floodwaters offer promise for this purpose. Delineation and mapping of floodwater prone areas suitable for rice production is important for successful utilization of this land resource. Here, we propose a method of assessing flood probability from submergence frequency, as estimated from satellite imagery and geospatial data. ALOS/PALSAR images acquired in May, June, August, and September 2010 were used to classify land and water, and then a submerged-area map was produced. From the results, we were able to accurately detect non-submerged areas and submerged areas with water depths of at least 3?cm. The number of times classified into submerged area was defined as submergence frequency, and it was approximated by distance from reservoirs representing White Volta River, ponds, and swamps. In addition, flood extent derived from reservoirs was simulated using digital elevation model (DEM). Finally, a flood probability assessment map was produced by integration of the estimated submergence frequency and flood extent simulation. The results of a comparison of soil moisture data measured at 69 points in the field and the NDVIs computed by ALOS/AVNIR showed that areas with high potential for flooding retained high levels of soil moisture and were more likely to show less deterioration of vegetation in the dry season. The validation of these results confirmed the adequacy of the flood probability assessment method.     

Identification of the dimethylbenzyl mercapturic acid in urine of rats treated with 1,2,3-trimethylbenzene.

The structure was investigated of the mercapturic acid excreted in urine of rats after the i.p. administration of 1,2,3-trimethylbenzene. Of the two regioisomeric mercapturic acids, i.e. N-acetyl-S-(2,3-dimethylbenzyl)-L-cysteine and N-acetyl-S-(2,6-dimethyl-benzyl)-L-cysteine, only the former was isolated by preparative HPLC and identified, by comparison with an authentic specimen. The excretion rate of the mercapturate was estimated to be approximately 5% of dose, not a substantial metabolic route.     

Light acclimation states of phytoplankton in the Southern Ocean, determined using photosynthetic pigment distribution

In high-latitude waters such as the Southern Ocean, the primary production of phytoplankton supports the ecosystem. To understand the photo-acclimation strategy of such phytoplankton within cold environments, the vertical distribution profile of photosynthetic pigments was analyzed in the Southern Ocean. Samples were taken along 110°E during the austral summer, and along 150°E and around the edge of the seasonal sea ice of the Antarctic Continent during the austral autumn. Pigment extraction methods were optimized for these samples. The standing crop of chlorophyll a was larger in the region along the edge of the seasonal sea ice than at sampling stations in open ocean areas. Chlorophyll concentration seemed to be dependent on the formation of thermo- and haloclines along the edge of the seasonal sea ice, but not in the open ocean where such clines are less pronounced. The marker pigments fucoxanthin and/or 19′-hexanoyloxyfucoxanthin were dominant at most sampling stations throughout the water column, while other marker pigments such as alloxanthin were quite low. This indicated that diatoms and/or haptophytes were the major phytoplankton in this area. Comparison of the relative ratio of fucoxanthin with that of 19′-hexanoyloxyfucoxanthin allowed some stations to be characterized as either diatom-dominant or haptophyte-dominant. The relative ratio of xanthophyll-cycle pigments (diadinoxanthin plus diatoxanthin) to chlorophyll a was high in surface waters and decreased gradually with depth. This suggests that near the ice edge during summer in the Southern Ocean, both diatoms and haptophytes acclimate to their light environments to protect their photosystems under high-light conditions.     

Establishment of unit generation rates of building debris in Kathmandu Valley,Nepal, after the Gorkha earthquake

Journal of Material Cycles and Waste Management - Significant quantities of building waste were generated from collapsed residential and dilapidated buildings as a result of the disastrous Gorkha...     

Airborne hydrophilic microplastics in cloud water at high altitudes and their role in cloud formation

Microplastic pollution is occurring in most ecosystem, yet their presence in high altitude clouds and their influence on cloud formation and climate change are poorly known. Here we analyzed microplastics in cloud water sampled at the summits of Japan mountains at 1300–3776 m altitude by attenuated total reflection imaging and micro-Fourier transform infrared spectroscopy. We observed nine microplastics including polyethylene, polypropylene, polyethylene terephthalate, polymethyl methacrylate, polyamide 6, polycarbonate, ethylene–propylene copolymer or polyethylene–polypropylene alloy, polyurethane, and epoxy resin. Microplastic were fragmented, with mean concentrations ranging from 6.7 to 13.9 pieces per liter, and with Feret diameters ranging from 7.1 to 94.6 μm. Microplastics bearing hydrophilic groups such as carbonyl and/or hydroxyl groups were abundant, suggesting that they might have acted as condensation nuclei of cloud ice and water. Overall, our finding suggest that high-altitude microplastics cloud influence cloud formation and, in turn, might modify the climate.

     

Growth inhibition and formation of morphologically abnormal cells of <Emphasis Type="Italic">Akashiwo sanguinea</Emphasis> (Hirasaka) G. Hansen et Moestrup by cell contact with <Emphasis Type="Italic">Cochlodinium polykrikoides</Emphasis> Margalef

We investigated the growth interaction between Cochlodinium polykrikoides and Akashiwo sanguinea using bi-algal cultures. When cultured together, morphologically abnormal cells of A. sanguinea appeared and the growth of A. sanguinea notably decreased. When C. polykrikoides and A. sanguinea were cultured separately in inner and outer wells separated by a membrane with a pore size of 3 μm, neither species showed suppressed growth and no morphologically abnormal cells of A. sanguinea were observed. Furthermore, filtrates from C. polykrikoides cultures did not affect the cell morphology or the growth of A. sanguinea. When the abnormal cells of A. sanguinea were transferred from bi-algal cultures into fresh medium and cultured as a mono-algal culture, cells recovered their normal morphology and multiplied. Therefore, the growth inhibition and formation of morphologically abnormal cells of A. sanguinea would be induced by constant cell contact with C. polykrikoides.     

Identification of the dimethylbenzyl mercapturic acid in urine of rats administered with 1,2,4-trimethylbenzene

A study was undertaken of the mercapturic acid metabolism of 1,2,4-trimethylbenzene in the rat. Of three regioisomeric dimethylbenzyl mercapturic acids, i.e. 2,4-, 2,5- and 3,4-dimethylbenzyl isomers, the third isomer was not found in the urinary mercapturic acid isolated by preparative HPLC, from the comparison of NMR spectrum of the isolate with those of authentic specimens. The urinary mercapturate was then assigned to 2,4- and/or 2,5-dimethylbenzyl isomers. The excretion rate of the mercapturic acid was 14-20% of dose as 2,4-dimethylbenzyl isomer.     

Analysis of car-to-bicycle approach patterns for developing active safety devices

Objective: To reduce the severity of injuries and the number of cyclist deaths in traffic accidents, active safety devices providing cyclist detection are considered to be effective countermeasures. The features of car-to-bicycle collisions need to be known in detail to develop such safety devices.

Methods: The study investigated near-miss situations captured by drive recorders installed in passenger cars. Because similarities in the approach patterns between near-miss incidents and real-world fatal cyclist accidents in Japan were confirmed, we analyzed the 229 near-miss incident data via video capturing bicycles crossing the road in front of forward-moving cars. Using a video frame captured by a drive recorder, the time to collision (TTC) was calculated from the car's velocity and the distance between the car and bicycle at the moment when the bicycle initially appeared.

Results: The average TTC in the cases where bicycles emerged from behind obstructions was shorter than that in the cases where drivers had unobstructed views of the bicycles. In comparing the TTC of car-to-bicycle near-miss incidents to the previously obtained results of car-to-pedestrian near-miss incidents, it was determined that the average TTC in car-to-bicycle near-miss incidents was significantly longer than that in car-to-pedestrian near-miss incidents.

Conclusions: When considering the TTC in the test protocol of evaluation for safety performance of active safety devices, we propose individual TTCs for evaluation of cyclist and pedestrian detections, respectively. In the test protocols, the following 2 scenarios should be employed: bicycle emerging from behind an unobstructed view and bicycle emerging from behind obstructions.