Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.     

Multiresidue analysis of neonicotinoids by solid-phase extraction technique using high-performance liquid chromatography

For routine monitoring of pesticides, a multiresidue analysis through solid-phase extraction technique and using high-performance liquid chromatography (HPLC) in cotton seed cake (CSC) has been developed. Extraction of fortified samples was carried out with aqueous acetone under vacuum. The concentrated extract was loaded onto the solid-phase extraction units, preconditioned with acetonitrile. The extraction units were then washed with hexane and finally eluted with acetonitrile. The pesticide residues were determined using a multiresidue method by reversed-phase HPLC. The average percentage recoveries were found to range between 65.47% and 110% at spiking levels of 10 to 40 mg/kg. The method developed shows a healthy rate of recovery and can successfully be utilized for the extraction and screening of neonicotinoid residues in CSC. The detection limits for imidacloprid, acetamiprid, and thiacloprid using this method were found to be 5, 10, and 20 mg/kg, respectively.     

Kinetics of oxidation of methylhydrazines in water. Factors controlling the formation of 1,1-dimethylnitrosamine

The kinetics of oxidation of methylhydrazine ($\text{MMH}$) and 1,1-dimethylhydrazine ($\text{UDMH}$) by dissolved oxygen in water has been measured at various acidities as a function of catalyst (cupric ion) concentration. In dilute solutions the oxidation occurs through a cupric ion catalyzed process as well as by an uncatalyzed step. The extent of formation of nitrosodimethylamine ($\text{NDMA}$) depends upon the initial $\text{UDMH}$ concentration. In dilute solutions $\text{NDMA}$ is not formed, but in more concentrated solutions, $\text{NDMA}$ formation increases with increasing $\text{UDMH}$ content, reaches a maximum at 60–80% $\text{UDMH}$ (by volume) and then decreases. The $\text{NDMA}$ yield appears to approximately parallel the viscosity of the medium, and it is speculated that the factors which control viscosity may also be responsible for governing $\text{NDMA}$ formation.     

Engineering of mono-dispersed mesoporous TiO2 over 1-D nanorods for water purification under visible light irradiation

Environmental Science and Pollution Research - Herein we synthesized a novel structure of mesoporous TiO2 decorated on 1D ZnO nanorods for environmental remediation. The effect of mesoporous TiO2...     

Options for broadening and deepening the LCA approaches

Life Cycle Assessment (LCA) has matured over the past decades and become part of the broader field of sustainability assessment. To strengthen LCA as a tool and eventually increase its usefulness for sustainability decision-making, it is argued that there is a need to expand the ISO LCA framework by integration and connection with other concepts and methods. This paper explores the potential options for deepening and broadening the LCA methodologies beyond the current ISO framework for improved sustainability analysis. By investigating several environmental, economic and social assessment methods, the paper suggests some options for incorporating (parts of) other methods or combining with other methods for broadening and deepening the LCA.     

SEQUENTIAL GENERATION OF STREAMFLOW1

ABSTRACT: An auto-regressive model has been developed for hydrologic data simulation. The model is computationally easier, parsimonious in number of model parameters and more stable in statistical characteristics than the existing auto-regressive model. The proposed model was used for synthesizing 10 sequences, each of 100 year length, of monthly flows for the river Beas. The statistical parameters were calculated using 49-year historical record for the river. The data was also synthesized using existing auot-regressive model. The synthesized sequences have been compared. The results indicate that the proposed model is as good as the existing auto-regressive model in preserving the mean and standard deviation of historical record. It is further shown that the proposed model requires less parameters than the auto-regressive model for simulation of long-term dependence.     

Spatial analysis of soil resources in the Mewat district in the semiarid regions of Haryana,India

The soil characteristics are critical for crop health and its yield and therefore for agriculture. The soil properties are spatially variable and therefore soil resources should be managed as per location-specific requirements. An integrated spatial analysis of the soil resources of Mewat district was conducted to identify the soil resource management zones to develop site-specific soil management plan which might lead to sustained and enhanced crop yield. Spatial analysis of soil resources was conducted by modeling soil fertility and erosion which determines the crop productivity in the region. Soil fertility of the region was modeled using weighted overlay approach using 10 soil parameters, namely nitrogen, phosphorus, potassium, sulfur, iron, zinc, manganese, organic carbon, electrical conductivity, and pH. Each parameter was assigned weights based on their relative importance to agricultural productivity. The modeled soil fertility was classified into three fertility zones, low, medium, and high. Soil fertility was found to be low to moderate in 65% of the area, largely because of the low nitrogen, soil organic carbon, phosphorus concentration, and excessive salinity. Soil erosion was modeled using the universal soil loss equation (USLE) model by estimating rainfall erosivity factor (R), the soil erodibility factor (K), the topographic factors (L and S), cropping factor (C), and the conservation practice factor (P). Soil erosion problems were limited to areas having high elevation with barren land and areas with minimal management practices. The severity of soil erosion was found high in 15% of the region, while the remaining 85% showed low to moderate erosion. Soil fertility and erosion were integrated using the multivariate clustering method to identify soil management zones. The region was delineated into three soil management zones. Zone I (29%) which covers majorly Tarou block, was characterized by high soil fertility and low soil erosion. Zone II (18%) with medium soil fertility and high erosion covers villages of Taoru, Nuh, Nagina, FP Jhirka, and Punhana, which are located in the foothills of Aravalli ranges. Zone III represents the major part of the region, covering Nuh, Nagina, and FP Jhirka blocks (54%) with low soil fertility and erosion conditions. Thus, within the study area, the soil management domains are spatially variable in terms of fertility and soil erosion, and thus zone-specific soil management measures are required to improve the soil condition in order to sustain and improve agriculture production. The study would help the policy makers to design site-specific planning for identified soil resource management zones.     

Loss of crop yields in India due to surface ozone: an estimation based on a network of observations

Surface ozone is mainly produced by photochemical reactions involving various anthropogenic pollutants, whose emissions are increasing rapidly in India due to fast-growing anthropogenic activities. This study estimates the losses of wheat and rice crop yields using surface ozone observations from a group of 17 sites, for the first time, covering different parts of India. We used the mean ozone for 7 h during the day (M7) and accumulated ozone over a threshold of 40 ppbv (AOT40) metrics for the calculation of crop losses for the northern, eastern, western and southern regions of India. Our estimates show the highest annual loss of wheat (about 9 million ton) in the northern India, one of the most polluted regions in India, and that of rice (about 2.6 million ton) in the eastern region. The total all India annual loss of 4.0–14.2 million ton (4.2–15.0%) for wheat and 0.3–6.7 million ton (0.3–6.3%) for rice are estimated. The results show lower crop loss for rice than that of wheat mainly due to lower surface ozone levels during the cropping season after the Indian summer monsoon. These estimates based on a network of observation sites show lower losses than earlier estimates based on limited observations and much lower losses compared to global model estimates. However, these losses are slightly higher compared to a regional model estimate. Further, the results show large differences in the loss rates of both the two crops using the M7 and AOT40 metrics. This study also confirms that AOT40 cannot be fit with a linear relation over the Indian region and suggests for the need of new metrics that are based on factors suitable for this region.     

Enrichment and fractionation of heavy metals in bed sediments of River Narmada, India

A metal fractionation study on bed sediments of River Narmada in Central India has been carried out to examine the enrichment and partitioning of different metal species between five geochemical phases (exchangeable fraction, carbonate fraction, Fe/Mn oxide fraction, organic fraction and residual fraction). The river receives toxic substances through a large number of tributaries and drains flowing in the catchment of the river. The toxic substances of particular interest are heavy metals derived from urban runoff as well as municipal sewage and industrial effluents. Heavy metals entering the river get adsorbed onto the suspended sediments, which in due course of time settle down in the bottom of the river. In this study fractionation of metal ions has been carried out with the objective to determine the eco-toxic potential of metal ions. Although, in most cases (except iron) the average trace/heavy metal concentrations in sediments were higher than the standard shale values, the risk assessment code as applied to the present study reveals that only about 1–3% of manganese, <1% of copper, 16–19% of nickel, 4–20% of chromium, 1–4% of lead, 8–13% of cadmium and 1–3% of zinc exist in exchangeable fraction and therefore falls under low to medium risk category. According to the Geo-accumulation Index (GAI), cadmium shows high accumulation in the river sediments, rest of other metals are under unpolluted to moderately polluted class.     

Allelopathic response of <Emphasis Type="Italic">Vetiveria zizanioides</Emphasis> (L.) Nash on members of the family Enterobacteriaceae and <Emphasis Type="Italic">Pseudomonas</Emphasis> spp.

The biological removal of phosphates was carried as a part of treatment strategy. Vetiveria zizanioides (L.) Nash belonging to the family Poaceae was used for biological removal of biostimulants. Vetiver reportedly has mycorrhizal association; besides having potential for removal of PO₄ ⁻³ also showed allelopathic affect on the microorganisms present in the water. In fact after a period of 96 h old roots of this plant have been found to have killing effects on the E. coli, Enterobacter spp. Pseudomonas spp. belonging to the family Enterobacteriaceae. The paper is opening a new face of study.