Management of mine spoil for crop productivity with lignite fly ash and biological amendments

Long-term field trials using lignite fly ash (LFA) were carried out in rice crops during the period 1996-2000 at Mine I, Neyveli Lignite Corporation, Tamil Nadu. LFA, being alkaline and endowed with an excellent pozzolanic nature, silt loam texture, and plant nutrients, has the potential to improve the texture, fertility, and crop productivity of mine spoil. The rice crops were the first, third, fifth, and sixth crops in rotation. The other crops, such as green gram (second) and sun hemp (fourth), were grown as green manure. For experimental trials, LFA was applied at various dosages (0, 5, 10, 20, 50, 100, and 200 t/ha), with and without press mud (10 t/ha), before cultivation of the first crop. Repeat applications of LFA were made at the same dosages in treatments of up to 50 t/ha (with and without press mud) before cultivation of the third and fifth crops. Press mud, a lightweight organic waste product from the sugar industry, was used as an organic amendment and source of plant nutrients. Also, a recommended dosage of chemical fertilizer, along with gypsum, humic acid, and biofertilizer as supplementing agents, was applied in all the treatments, including control. With one-time and repeat applications of LFA, from 5 to 20 t/ha (with and without press mud), the crop yield (grain and straw) increased significantly (p < 0.05), in the range from 3.0 to 42.0% over the corresponding control. The maximum yield was obtained with repeat applications of 20 t/ha of LFA with press mud in the third crop. The press mud enhanced the yield in the range of 1.5-10.2% with various dosages of LFA. The optimum dosage of LFA was 20 t/ha for both one-time and repeat applications. Repeat applications of LFA at lower dosages of up to 20 t/ha were more effective in increasing the yield than the corresponding one-time applications of up to 20 t/ha and repeat applications at 50 t/ha. One-time and repeat applications of LFA of up to 20 t/ha (with and without press mud), apart from increasing the yield, evinced improvement in the texture and fertility of mine spoil and the nutrient content of crop produce. Furthermore, some increase in the content of trace and heavy metals and the level of gamma-emitters in the mine spoil and crop produce was observed, but well within the permissible limits. The residual effect of LFA on succeeding crops was also encouraging in terms of eco-friendliness. Beyond 20 t/ha of LFA, the crop yield decreased significantly (p < 0.05), as a result of the formation of hardpan in the mine spoil and possibly the higher concentration of soluble salts in the LFA. However, the adverse effects of soluble salts were annulled progressively during the cultivation of succeeding crops. A plausible mechanism for the improved fertility of mine spoil and the carryover or uptake of toxic trace and heavy metals and gamma-emitters in mine spoil and crop produce is also discussed.     

超稠油缓冲罐汽液分离环保装置的研究与应用

针对风城油田超稠油开发过程中,100m~3缓冲罐蒸汽携带大量微小油滴造成罐体、管线、地面污染的问题,在不改变罐体结构的前提下,研制一种汽液分离环保装置,通过在缓冲罐顶部安装该环保装置,实现汽液完全分离,小液滴最终流入罐内,从而有效解决了蒸汽携带油滴从缓冲罐罐口飘散造成的环境污染问题,环境效益和经济效益显著。     

新疆新型农村合作医疗制度运行分析

健康水平的提高对于农民贫困的缓解、增加收入具有重要的作用,健康权被看做是一种重要的人类"可行能力",在当前我国农村地区.新型农村合作医疗是保障这项最基本可行能力的最重要的制度基础.新型农村合作医疗制度的有效运行,将有助于合作医疗制度秉持公平和保障最基本健康的制度理念并保证包括少数民族农民在内的全体农民健康的实现.而在当前新疆民族地区存在来自自然、经济、社会等方面的制度运行约束,阻碍了新型农村合作医疗制度的平稳、有效运行.该文全面分析了这些制度运行障碍,详细阐述了新疆农村地区自然环境恶劣、卫生设施落后、农民健康保健意识差、农民收入增速缓慢、民族之间语言障碍等因素,并提出了发展民族医药、重视预防保健、改革补偿模式、加强双语教育、探索新时期赤脚医生制度、完善医疗救助制度6项对策.     

Numerical analysis of water and solute transport in variably-saturated fractured clayey till

This study numerically investigates the influence of initial water content and rain intensities on the preferential migration of two fluorescent tracers, Acid Yellow 7 (AY7) and Sulforhodamine B (SB), through variably-saturated fractured clayey till. The simulations are based on the numerical model HydroGeoSphere, which solves 3D variably-saturated flow and solute transport in discretely-fractured porous media. Using detailed knowledge of the matrix, fracture, and biopore properties, the numerical model is calibrated and validated against experimental high-resolution tracer images/data collected under dry and wet soil conditions and for three different rain events. The model could reproduce reasonably well the observed preferential migration of AY7 and SB through the fractured till, although it did not capture the exact depth of migration and the negligible impact of the dead-end biopores in a near-saturated matrix. A sensitivity analysis suggests fast flow mechanisms and dynamic surface coating in the biopores, and the presence of a plough pan in the till.     

Use of biosurfactants from urban wastes compost in textile dyeing and soil remediation

A compost isolated humic acid-like (cHAL) material was pointed out in previous work for its potential as auxiliary in chemical technology. Its potential is based on its relatively low 0.4gL(-1) critical micellar concentration (cmc) in water, which enables cHAL to enhance the water solubility of hydrophobic substances, like phenanthrene, when used at higher concentrations than 0.4gL(-1). This material could be obtained from a 1:1 v/v mixture of municipal solid and lignocellulosic wastes composted for 15 days. The compost, containing 69.3% volatile solids, 39.6% total organic C and 21C/N ratio, was extracted for 24h at 65 degrees C under N2 with aqueous 0.1molL(-1) NaOH and 0.1molL(-1) Na4P2O7, and the solution was acidified to separate the precipitated cHAL in 12% yield from soluble carbohydrates and other humic and non-humic substances. In this work two typical applications of surfactants, i.e., textile dyeing (TD) and soil remediation by washing (SW), were chosen as grounds for testing the performance of the cHAL biosurfactant against the one of sodium dodecylsulfate (SDS), which is a well established commercial synthetic surfactant. The TD trials were carried out with nylon 6 microfiber and a water insoluble dye, while the SW tests were performed with two soils contaminated by polycyclic aromatic hydrocarbons (PAH) for several decades. Performances were rated in the TD experiments based on the fabric colour intensity (DeltaE) and uniformity (sigmaDeltaE), and in the SW experiments based on the total hydrocarbons concentration (CWPAH) and on the residual surfactant (Cre) concentrations in the washing solution equilibrated with the contaminated soils. The results show that both cHAL and SDS exhibit enhanced performance when applied above their cmc values. However, while in the TD case a significant performance effect was observed at the surfactants cmc value, in the SW case the required surfactants concentration values were equivalent to 25-125xcmc for cHAL and to 4-22xcmc for SDS. The vis-a-vis comparison of the two surfactants gave the following results: in the TD case the cHAL biosurfactant at 0.4gL(-1) yields good colour intensity and equal colour uniformity as SDS at 5gL(-1), in the SW case cHAL was found to enhance CWPAH by a factor of 2-4 relative to SDS with one soil, whereas with the other soil the two surfactants behaved similarly. The Cre data, however, showed that both soils absorbed by far more SDS (68-95%) than cHAL (12-54%). The results point out intriguing technological and environmental perspectives deriving from the use of compost isolated biosurfactants in the place of synthetic surfactants.     

Water monitoring and treatment for drinking purposes in 2004 tsunami affected area—Ban Nam Khem, Phang Nga, Thailand

University of Brescia and Mahidol University of Bangkok developed a project in Phang Nga province (Thailand), the most damaged by 2004 tsunami. In particular, the study, performed between April and May 2006, dealt with the surface and ground water monitoring in Ban Nam Khem village and the experimental evaluation of possible drinking treatment alternatives. The monitoring highlighted that saline content in the tsunami affected area is decreasing but still very high (conductivity presented values up to 2,600 and 6,230 microS/cm in ground and surface water, respectively); hence, advanced and complicated processes such as reverse osmosis should be adopted to treat such water for drinking purposes. Waiting for ground water salinity to assume acceptable values, activities for the reduction of its organic and microbiological contamination will be started. However, it has to be underlined that the diffusion of drinking water to a greater part of population can be obtained only through the realization of new centralised treatment plants and the improvement of existing ones (serving at the moment about 20% of inhabitants).     

Environmetrics to evaluate marine environment quality

The environmetric data analysis of analytical datasets from sediment and benthic organisms samples collected from different sampling sites along the coast of Black Sea near to City of Varna, Bulgaria has given some important indications about the bioindication properties of both type of samples. Various multivariate statistical methods like cluster analysis, principal components analysis, source apportioning modeling and partial least square (PLS) modeling were used in order to classify and interpret the parameters describing the chemical content of the coastal sediments (major components, heavy metals and total organic carbon) and benthic organisms (heavy metals). It has been shown that seriously polluted coastal zones are indicated in the same way by all benthic species, although some specificity could be detected for moderate polluted regions' e.g. polychaeta accumulated preferably Co, Cr, Cu, and Pb; crustacea - As, Cd, and Ni; mollusca - Zn. The identified latent factors responsible for the dataset structure are clearly indicated and apportioned with respect to their contribution to the total mass or total concentration of the species in the samples. The linear regression and PLS models indicated that a reliable forecast about the relation between naturally occurring chemical components and polluting species accumulated in the benthic organisms is possible.     

Airborne Alternaria and Cladosporium species and relationship with meteorological conditions in Eskisehir City, Turkey

Alternaria and Cladosporium, known as the most allergenic spores were first collected by means of Durham gravimetric sampler from Eskisehir atmosphere from January 1, 2000 to December 31, 2001. The daily, monthly and annual variations in spores/cm(2) of Cladosporium and Alternaria were recorded. During this period, a total of 10.231 spores belonging to Cladosporium and Alternaria genera were recorded. Of these spores, 5,103 were identified in 2000 and 5,128 in 2001. While 63.09% of the total spores were those of Cladosporium, 36.91% were of Alternaria. Relationships between airborne fungal spore presence and meteorological conditions were statistically investigated. A Shapiro-Wilk test revealed that the airborne Cladosporium and Alternaria spores differed from a normal distribution. Thus, a Friedmann test was performed followed by a Pearson Correlation Analysis. The effects of rainfall, temperature and wind speed on Cladosporium and Alternaria numbers were non-significant according to the sites and months (p > 0.05), but the effects of relative humidity on Cladosporium and Alternaria numbers were significant (p < 0.01). Spore concentrations reached to their highest levels in May 2001.