Atrazine sorption and fate in a Ultisol from humid tropical Brazil

This study combined laboratory based microcosm systems as well as field experiments to evaluate the mobility of atrazine on a Ultisol under humid tropical conditions in Brazil. Results from sorption experiments fit to the Freundlich isotherm model [K(f) 0.99 mg kg(-1)/(mg l(-1))(1/n)], and indicate a low sorption capacity for atrazine in this soil and consequently large potential for movement by leaching and runoff. Microcosm systems using (14)C-atrazine to trace the fate of the applied herbicide, showed that 0.33% of the atrazine was volatilized, 0.25% mineralized and 6.89% was recorded in the leachate. After 60 d in the microcosms, 75% of the (14)C remained in the upper 5 cm soil layer indicating atrazine or its metabolites remained close to the soil surface. In field experiments, after 60 d, only 5% of the atrazine applied was recovered in the upper soil layers. In the field experiments atrazine was detected at a depth of 50 cm indicating leaching. Simulating tropical rain in field experiments resulted in 2.1% loss of atrazine in runoff of which 0.5% was adsorbed onto transported soil particles and 1.6% was in solution. Atrazine runoff was greatest two days after herbicide application and decreased 10 fold after 15 d. The use of atrazine on Ultisols, in the humid tropics, constitutes a threat to water quality, causing surface water and ground water pollution.     

Electrochemical degradation applied to the metabolites of Acid Orange 7 anaerobic biotreatment

The electrochemical oxidation of the biotic degradation products of the textile dye C.I. Acid Orange 7 (AO7) was achieved using a boron doped diamond electrode (BDD). Tests were performed with model solutions of the biotic degradation products, sulphanilic acid (SA) and 1-amino-2-naphthol (AN), and also with real effluents obtained in experiments carried out in an up-flow anaerobic sludge blanket (UASB) reactor, fed with a simulated textile effluent containing AO7, working in mesophilic or thermophilic conditions. Bulk electrolysis was studied using two different supporting electrolytes - NaCl and Na(2)SO(4). The influence of initial metabolite concentration and current density on the electrodegradation rates of the biotic products was investigated. For the UASB effluents, oxidation tests were carried out for different electrolytes and at different current densities. Samples were collected at pre-selected intervals and absorbance measurements, chemical oxygen demand (COD) and total organic carbon (TOC) tests and high performance liquid chromatography (HPLC) analysis were performed. Results have shown an almost complete elimination of the persistent pollutants and a COD removal higher than 70% for both AN and SA. For the UASB effluents, COD removals between 45% and 90% and TOC removals varying from 19% to 41% were obtained.     

Ozone pre-treatment as improver of PAH removal during anaerobic digestion of urban sludge

Polycyclic aromatic hydrocarbons are ubiquitous persistent pollutants. They may accumulate in sludge during wastewater treatment because of their low biodegradability and their hydrophobic characteristics. Combination of ozonation and anaerobic digestion may be efficient to remove PAHs naturally present in sludge. The objective of this study was to investigate the impact of ozone pre-treatment, with and without surfactant addition, on the anaerobic degradation of 12 PAHs (from low to high molecular weight). Under anaerobic digestion without ozonation pre-treatment, the highest removals were obtained for the lightest PAHs (3-aromatic rings). Ozonation pre-treatment of sludge allowed to increase biodegradability or bioavailability of each PAH, and the PAH removals were well correlated to the PAH solubility. Finally, addition of tyloxapol before sludge ozone pre-treatment had antagonist effects on PAH removal during anaerobic digestion: negative impact on anaerobic ecosystem activity and improvement of PAH bioaccessibility (particularly the PAHs with the highest octanol water partition coefficients).     

Optimisation of pressurised liquid extraction for elimination of sulphur interferences during determination of organotin compounds in sulphur-rich sediments by gas chromatography with flame photometric detection

A simple method for species-selective analysis of organotin compounds (OTCs) (butyl and phenyl) in sediments was developed. The sample preparation procedure was specifically optimised for sulphur-rich sediments to eliminate interferences from elemental sulphur and organosulphur compounds. Tin species were extracted from sediment samples using pressurised liquid extraction technique (PLE), ethylated - with simultaneous extraction to isooctane - in aqueous phase with sodium tetraethylborate (NaBEt(4)) and separated/detected by gas chromatography with flame photometric detection (GC-FPD). PLE operational variables (extraction temperature and pressure, solvent composition and number of static extraction steps) and extract handling routine were fine-tuned to minimise the amount of extracted interferents while keeping OTCs recovery at an acceptable level. Best results were obtained after extraction of sediment samples with methanol/water (75% v/v methanol) solution of acetic acid/sodium acetate with tropolone addition (0.6 g l(-1)). Derivatisation of low temperature, high-pressure (50 degrees C, 13.8 MPa) extracts gives isooctane extracts which are clean enough to be directly analysed by GC-FPD without any further cleanup. Interferences from elemental sulphur were completely eliminated while concentrations of other interferents were reduced to the level not impairing quantitation of OTCs under the study. No negative effects in terms of chromatographic column deterioration were observed after repeated injections of such extracts. Two certified reference materials, BCR646 and PACS-2, were analysed to assess performance of the method. Recoveries of all OTCs under the study, except MBT, were in the range of 91-114%. MBT extraction efficiency was low (34-47%) therefore the method is unsuitable for precise determinations of this compound.     

High levels of organochlorines in mothers' milk from Chennai (Madras) city, India

Mothers' milk from Chennai (formerly Madras), India and three other places Perungudi, the municipal dumping site of south Chennai area (situated at the suburb of Chennai), Chidambaram, a predominantly agricultural town situated 250 km south of Chennai and Parangipettai, a fishing village 15 km north of Chidambaram, all situated at or near the southeastern Bay of Bengal coast of India were found to contain measurable concentrations of HCHs, DDTs, PCBs, CHLs and HCB. A notable finding in this study is that Chennai mothers have higher levels of HCHs in their milk and hence may transfer considerably higher amounts of the chemical than the mothers from all the other three places of the present study indicating a higher health risk to Chennai's children. It was also found that the levels of the two organochlorine pesticides (HCHs and DDTs) increased in Chennai mothers' milk in the last decade. Food items collected from Chennai markets did not show any remarkably higher levels of any of the chemicals measured in this study. Levels of the two classical organochlorines (DDTs and HCHs) have declined in many of the food items when compared with our data collected two decades before in the same locations, showing the effectiveness of the recent ban on both these chemicals in the country. The sources, possible health risks and the ways to curtail the effects of HCHs, especially at Chennai, should be investigated further.     

Ability of fungi to degrade synthetic polymer nylon-6

Fifty-eight fungi have been tested for their ability to degrade a recalcitrant synthetic polymer polyamide-6, generally known as nylon-6. Most of them were isolated from a factory producing nylon-6. After preliminary screening, 12 strains were selected for submerged culture in a medium with nylon fibres as the only N-source. No degradation was observed with the isolates from the factory. Wood degrading fungi from a culture collection, however, degraded nylon after incubation for several weeks. Bjerkandera adusta disintegrated the fibres most efficiently, starting with the small transverse grooves, which deepened into cracks. The superficial layers crumbled to leave a thin inner core of the fibre, which finally broke down into fragments. The remaining insoluble part of the nylon showed a decrease in number average molecular mass from 16900 to 5600 during a 60-day incubation. Its thermal properties, such as shifts in melting points and broadening of the melting endotherms, were altered. The reduction of the amount of nylon and the composition of the liquid phase indicated that part of the polymer was degraded into soluble products. After 50 days, the total nitrogen content of the soluble fraction was 10-fold higher than in the control sample. Manganese peroxidase, presumably responsible for the degradation, was detected in the liquid phase. The study shows that only white rot fungi are able to break down nylon-6. For the first time this polymer was shown to be disrupted by B. adusta. The extent of the biodegradation indicates its potential for application in nylon waste reduction.     

Percentile estimation using variable censored data

Much progress has been made in recent years to address the estimation of summary statistics, using data that are subject to censoring of results that fall below the limit of detection (LOD) for the measuring instrument. Truncated data methods (e.g., Tobit regression) and multiple-imputation are two approaches for analyzing data results that are below the LOD. To apply these methods requires an assumption about the underlying distribution of the data. Because the log-normal distribution has been shown to fit many data sets obtained from environmental measurements, the common practice is to assume that measurements of environmental factors can be described by log-normal distributions. This article describes methods for obtaining estimates of percentiles and their associated confidence intervals when the results are log-normal and a fraction of the results are below the LOD. We present limited simulations to demonstrate the bias of the proposed estimates and the coverage probability of their associated confidence intervals. Estimation methods are used to generate summary statistics for 2,3,7,8-tetrachloro dibenzo-p-dioxin (2,3,7,8-TCDD) using data from a 2001 background exposure study in which PCDDs/PCDFs/cPCBs in human blood serum were measured in a Louisiana population. Because the congener measurements used in this study were subject to variable LODs, we also present simulation results to demonstrate the effect of variable LODs on the multiple-imputation process.     

Biosurfactant technology for remediation of cadmium and lead contaminated soils

This research focuses on column experiments conducted to evaluate the potential of environmentally compatible rhamnolipid biosurfactant produced by Pseudomonas aeruginosa strain BS2 to remove heavy metals (Cd and Pb) from artificially contaminated soil. Results have shown that di-rhamnolipid removes not only the leachable or available fraction of Cd and Pb but also the bound metals as compared to tap water which removed the mobile fraction only. Washing of contaminated soil with tap water revealed that approximately 2.7% of Cd and 9.8% of Pb in contaminated soil was in freely available or weakly bound forms whereas washing with rhamnolipid removed 92% of Cd and 88% of Pb after 36 h of leaching. This indicated that di-rhamnolipid selectively favours mobilization of metals in the order of Cd>Pb. Biosurfactant specificity observed towards specific metal will help in preferential elution of specific contaminant using di-rhamnolipid. It was further observed that pH of the leachates collected from heavy metal contaminated soil column treated with di-rhamnolipid solution was low (6.60-6.78) as compared to that of leachates from heavy metal contaminated soil column treated with tap water (pH 6.90-7.25), which showed high dissolution of metal species from the contaminated soil and effective leaching of metals with treatment with biosurfactant. The microbial population of the contaminated soil was increased after removal of metals by biosurfactant indicating the decrease of toxicity of metals to soil microflora. This study shows that biosurfactant technology can be an effective and nondestructive method for bioremediation of cadmium and lead contaminated soil.     

Acid-base properties of humic substances from composted and thermally-dried sewage sludges and amended soils as determined by potentiometric titration and the NICA-Donnan model

The acid-base properties of humic acids (HAs) and fulvic acids (FAs) isolated from composted sewage sludge (CS), thermally-dried sewage sludge (TS), soils amended with either CS or TS at a rate of 80 t ha(-1)y(-1) for 3y and the corresponding unamended soil were investigated by use of potentiometric titrations. The non-ideal competitive adsorption (NICA)-Donnan model for a bimodal distribution of proton binding sites was fitted to titration data by use of a least-squares minimization method. The main fitting parameters of the NICA-Donnan model obtained for each HA and FA sample included site densities, median affinity constants and widths of affinity distributions for proton binding to low and high affinity sites, which were assumed to be, respectively, carboxylic- and phenolic-type groups. With respect to unamended soil HA and FA, the HAs and FAs from CS, and especially TS, were characterized by smaller acidic functional group contents, larger proton binding affinities of both carboxylic- and phenolic-type groups, and smaller heterogeneity of carboxylic and phenolic-type groups. Amendment with CS or TS led to a decrease of acidic functional group contents and a slight increase of proton binding affinities of carboxylic- and phenolic-type groups of soil HAs and FAs. These effects were more evident in the HA and FA fractions from CS-amended soil than in those from TS-amended soil.     

Photochemical decomposition of environmentally persistent short-chain perfluorocarboxylic acids in water mediated by iron(II)/(III) redox reactions

The photochemical decomposition of short-chain (C(3)-C(5)) perfluorocarboxylic acids (PFCAs) was investigated. Direct photolysis in water proceeded slowly with the 220- to 460-nm light emission from a xenon-mercury lamp to form F(-), CO(2), and shorter-chain PFCAs. Addition of a small amount of Fe(3+) to the aqueous solutions of the PFCAs dramatically enhanced their photochemical decomposition under an oxygen atmosphere: when the (initial PFCA)/(initial Fe(3+)) molar ratio was 13.5 (initial PFCA concentration=67.3mM), the pseudo-first-order rate constants for the PFCA decomposition were 3.6-5.3 times those with photolysis alone, and the turnover number for the catalytic PFCA decomposition [i.e., (moles of decomposed PFCA)/(moles of initial Fe(3+))] reached 6.71-8.68 after 24h of irradiation. The catalysis can be explained by photoredox reactions between PFCA, Fe(3+)/Fe(2+) and oxygen via photo-induced complexation of Fe(3+) with the PFCAs.