Case study II: application of the divalent cation bridging theory to improve biofloc properties and industrial activated sludge system performance-using alternatives to sodium-based chemicals.

The objective of this study was to investigate the application of the divalent cation bridging theory (DCBT) as a tool in the chemical selection process at an activated sludge plant to improve settling, dewatering, and effluent quality. According to the DCBT, to achieve improvements, the goal of chemical selection should be to reduce the ratio of monovalent-to-divalent (M/D) cations. A study was conducted to determine the effect of using magnesium hydroxide [Mg(OH)2] as an alternative to sodium hydroxide (NaOH) at a full-scale industrial wastewater treatment plant. Floc properties and treatment plant performance were measured for approximately one year during two periods of NaOH addition and Mg(OH)2 addition. A cost analysis of plant operation during NaOH and Mg(OH)2 use was also performed. During NaOH addition, the M/D ratio was 48, while, during Mg(OH)2 addition, this ratio was reduced to an average of approximately 0.1. During the Mg(OH)2 addition period, the sludge volume index, effluent total suspended solids, and effluent chemical oxygen demand were reduced by approximately 63, 31, and 50%, respectively, compared to the NaOH addition period. The alum and polymer dose used for clarification was reduced by approximately 50 and 60%, respectively, during Mg(OH)2 addition. The dewatering properties of the activated sludge improved dewatering as measured by decreased capillary suction time and specific resistance to filtration (SRF), along with an increase in cake solids from the SRF test. This corresponded to a reduction in the volume of solids thickened by centrifuges at the treatment plant, which reduced the disposal costs of solids. Considering the costs for chemicals and solids disposal, the annual cost of using Mg(OH)2 was approximately 30,000 dollars to 115,000 dollars less than using NaOH, depending on the pricing of NaOH. The results of this study confirm that the DCBT is a useful tool for assessing chemical-addition strategies and their potential effect on activated sludge performance.     

An investigation of aqueous activity coefficients at low concentrations

The activity of a chemical in solution determines its tendency to move into other media. At low concentrations (<0.01M) it is generally considered to be linearly related to concentration. A hypothetical model based on the structure of liquid water is discussed which could cause deviations from this linearity in the ppb region, a concentration much lower than that normally investigated thermodynamically, but one of great importance environmentally. Headspace experiments are reported with carbon tetrachloride and chloroform in water at concentrations down to ～10^?3 ppb but no such deviations were discerned.     

Communication by changing signals: call switching in red-winged blackbirds

Summary Territorial male red-winged blackbirds use many different alert calls which overlap broadly in the context of their use and which are often given in continuous, repetitive fashion. Males give one call type many times before switching to another type, and call during all daily activities. In this field study we demonstrate that males tend to give the same call types as their neighbors and change types to match the changes of their neighbors. Individual males change call types in response to the appearance of a mounted hawk and also match call type changes broadcast from a loudspeaker. The various call types are not associated with particular behavioral contexts. We suggest that red-winged blackbirds operate a general acoustic alert system by calling repetitiously and changing call types when detecting environmental changes such as appearances of predators. Evidence is presented that communication is acheived primarily during switching among different call signals, and not by specific calls that refer to particular stimuli or states of alertness.     

CALIBRATION OF A WATER-BALANCE MODEL FOR SMALL WATERSHEDS IN EASTERN OREGON1

ABSTRACT: The BURP water-balance model was calibrated for 13 small (0.46 to 7.00 mi²), forested watersheds in the Blue Mountains of eastern Oregon where snowmelt is the dominant source of runoff. BURP is the model name and is not an acronym. Six of the 16 parameters in BURP were calibrated. The subsurface recession coefficient and three subsurface water-storage parameters were most sensitive for simulating monthly flow. Calibrated subsurface recession coefficients ranged from 0.988 to 0.998. The subsurface-water storage parameters were calibrated at between 20 to 120 percent of their initial values obtained from a category III soil survey. That reconnaissance-level survey was apparently too broad to accurately reflect subsurface-water storage in small watersheds. Tests of model performance showed BURP is capable of producing accurate simulations of monthly flow for mountainous, snow-dominated watersheds with shallow (< 4 ft) soils when calibrated with 2 to 4 years of streamflow data. A regression of observed versus simulated monthly flows with data from all watersheds combined showed that BURP accounted for 85 percent of the variability in observed flows, which ranged from 0.01 to 20.8 inches, but underpredicted high flow months, with a slope of 1.15 that is significantly different from 1.0 (p = 0.05). Without prior calibration, subsurface-water storage parameters appeared to be the greatest source of potential error.     

HYDROLOGIC RESPONSE OF MASSACHUSETTS WATERSHEDS1

Hydrologic response, defined as the annual direct runoff divided by the annual precipitation, was computed for twenty-one watersheds in or near western Massachusetts, using a total of 232 years of hydrologic records. Variability of the results over the period of analysis was greater than is desirable to inspire confidence in the usefulness of the hydrologic response function; however, the results do suggest that the hydrologic response concept, with appropriate refinements, could be applied successfully to the problem of delineating hydrologic provinces and determination of drainage and storage in unregulated watersheds.     

Per- and polyfluoroalkyl substances (PFASs) in contaminated coastal marine waters of the Saudi Arabian Red Sea: a baseline study

Environmental Science and Pollution Research - Per- and polyfluoroalkyl substances (PFASs) are today considered important constituents of the continuously growing substance group of persistent...     

Highway runoff quality in Ireland

Highway runoff has been identified as a significant source of contaminants that impact on the receiving aquatic environment. Several studies have been completed documenting the characteristics of highway runoff and its implication to the receiving water in the UK and elsewhere. However, very little information is available for Ireland. The objective of this study was to determine the quality of highway runoff from major Irish roads under the current road drainage design and maintenance practice. Four sites were selected from the M4 and the M7 motorways outside Dublin. Automatic samplers and continuous monitoring devices were deployed to sample and monitor the runoff quality and quantity. More than 42 storm events were sampled and analysed for the heavy metals Cd, Cu, Pb, and Zn, 16 US EPA specified PAHs, volatile organic compounds including MTBE, and a number of conventional pollutants. All samples were analysed based on the Standard Methods. Significant quantities of solids and heavy metals were detected at all sites. PAHs were not detected very often, but when detected the values were different from quantities observed in UK highways. The heavy metal concentrations were strongly related to the total suspended solids concentrations, which has a useful implication for runoff management strategies. No strong relationship was discovered between pollutant concentrations and event characteristics such as rainfall intensity, antecedent dry days (ADD), or rainfall depth (volume). This study has demonstrated that runoff from Irish motorways was not any cleaner than in the UK although the traffic volume at the monitored sites was relatively smaller. This calls for a site specific investigation of highway runoff quality before adopting a given management strategy.     

Nutrient bioassimilation capacity of aquacultured oysters: quantification of an ecosystem service

Like many coastal zones and estuaries, the Chesapeake Bay has been severely degraded by cultural eutrophication. Rising implementation costs and difficulty achieving nutrient reduction goals associated with point and nonpoint sources suggests that approaches supplemental to source reductions may prove useful in the future. Enhanced oyster aquaculture has been suggested as one potential policy initiative to help rid the Bay waters of excess nutrients via harvest of bioassimilated nutrients. To assess this potential, total nitrogen (TN), total phosphorous (TP), and total carbon (TC) content were measured in oyster tissue and shell at two floating-raft cultivation sites in the Chesapeake Bay. Models were developed based on the common market measurement of total length (TL) for aquacultured oysters, which was strongly correlated to the TN (R2 = 0.76), TP (R2 = 0.78), and TC (R2 = 0.76) content per oyster tissue and shell. These models provide resource managers with a tool to quantify net nutrient removal. Based on model estimates, 10(6) harvest-sized oysters (76 mm TL) remove 132 kg TN, 19 kg TP, and 3823 kg TC. In terms of nutrients removed per unit area, oyster harvest is an effective means of nutrient removal compared with other nonpoint source reduction strategies. At a density of 286 oysters m(-2), assuming no mortality, harvest size nutrient removal rates can be as high as 378 kg TN ha(-1), 54 kg TP ha(-1), and 10,934 kg TC ha(-1) for 76-mm oysters. Removing 1 t N from the Bay would require harvesting 7.7 million 76-mm TL cultivated oysters.     

Effects of four decades of fire manipulation on woody vegetation structure in Savanna

The amount of carbon stored in savannas represents a significant uncertainty in global carbon budgets, primarily because fire causes actual biomass to differ from potential biomass. We analyzed the structural response of woody plants to long-term experimental burning in savannas. The experiment uses a randomized block design to examine fire exclusion and the season and frequency of burn in 192 7-ha experimental plots located in four different savanna ecosystems. Although previous studies would lead us to expect tree density to respond to the fire regime, our results, obtained from four different savanna ecosystems, suggest that the density of woody individuals was unresponsive to fire. The relative dominance of small trees was, however, highly responsive to fire regime. The observed shift in the structure of tree populations has potentially large impacts on the carbon balance. However, the response of tree biomass to fire of the different savannas studied were different, making it difficult to generalize about the extent to which fire can be used to manipulate carbon sequestration in savannas. This study provides evidence that savannas are demographically resilient to fire, but structurally responsive.