Introduced and cryptogenic species in Port Phillip Bay, Victoria, Australia

Port Phillip Bay (PPB) is a large (1,930 km²), temperate embayment in southern Victoria, Australia. Extensive bay-wide surveys of PPB have occurred since 1840. In 1995/1996 the Commonwealth Scientific and Industrial Research Organization (CSIRO) Centre for Research on Introduced Marine Pests (CRIMP) undertook an intensive evaluation of the region with the aims of developing a comprehensive species list of native and introduced biota and contrasting previous bay-wide assessments with a current field survey in order to detect new incursions and discern alterations to native communities. Two methods were used to meet these aims: a re-evaluation of regional museum collections and published research in PPB to identify and determine the timing of introductions; and field surveys for benthic (infauna, epifauna and encrusting) organisms between September 1995 to March 1996. One hundred and sixty introduced (99) and cryptogenic (61) species were identified representing over 13% of the recorded species of PPB. As expected, the majority of these are concentrated around the shipping ports of Geelong and Melbourne. Invasions within PPB appear to be increasing, possibly due to an increase in modern shipping traffic and an increase in aquaculture (historically associated with incidental introductions); however the records of extensive biological surveys suggest that this may, in part, be an artefact of sampling effort. In contrast to Northern Hemisphere studies, PPB (and Southern Hemisphere introductions in general) have significantly different suites of successfully invading taxa. PPB is presented as one of the most invaded marine ecosystems in the Southern Hemisphere.Communicated by M.S. Johnson, Crawley     

DNA sequence evidence for speciation,paraphyly and a Mesozoic dispersal of cancellothyridid articulate brachiopods

Because the classification of extant and fossil articulate brachiopods is based largely upon shell characters observable in fossils, it identifies morphotaxa whose biological status can, in practice, best be inferred from estimates of genetic divergence. Allozyme polymorphism and restriction fragment length polymorphism of mitochondrial DNA (mtDNA RFLP) have been used to show that nuclear and mitochondrial genetic divergence between samples of the cancellothyridid brachiopods Terebratulina septentrionalis from Canada and T. retusa from Europe is compatible with biological speciation, but the genetic distances obtained were biased by methodological limitations. Here, we report estimates of divergence in 12S rDNA mitochondrial sequences within and between samples of these brachiopods. The sequence-based genetic distance between these samples (5.98ǂ.07% SE) is at least 10 times greater than within them and, since they also differ in a complex life-history trait, their species status is considered to be securely established. Divergence levels between 12S rDNA genes of three other cancellothyridids, T. unguicula from Alaska, T. crossei from near Japan, and Cancellothyris hedleyi from near Australia are higher than between the two North Atlantic species, and the mean nucleotide distance between all these cancellothyrids is similar to the mean distance between species of Littorina (Mollusca: Gastropoda). Sequences of both 12S and 16S genes from cancellothyridids and other short-looped brachiopod species show neither saturation nor lineage-specific rate differences and, when analysed with different outgroups, either separately or together, yield one unexpected, but well-supported, tree with Alaskan T. unguicula basal and C. hedleyi nested within Terebratulina, i.e. these genera are paraphyletic. A geologically dated divergence between Antarctic and New Zealand species of the short-looped brachiopod Liothyrella is used to calibrate the rate of 12S divergence at ca. 0.1% per million years (MY), and this rate is used to infer that T. septentrionalis and T. retusa have been diverging for ca. 60 MY and that they and T. unguicula have been diverging from their last common ancestor for ca. 100 MY. This indicates a Mesozoic origin for the present-day distribution of cancellothyridids and the basal position of T. unguicula suggests a possible North Pacific centre of origin, with separate Atlantic and Pacific radiations. The inclusion of Cancellothyris within Terebratulina also shows that adult shell characters such as umbo, foramen and symphytium shape, whilst probably indispensible for the practical classification of fossils, are not reliable guides to genealogy.     

Diagnosis,surveillance, and treatment of the anemic fetus using middle cerebral artery peak systolic velocity measurement

The in utero course of the anemic fetus has improved dramatically, owing to early diagnosis and cordocentesis transfusion. In utero invasive procedures such as amnio- and cordocentesis have become important modalities in the evaluation and treatment of anemic fetuses. However, they carry risks for both the mother and fetus. A valid and sensitive noninvasive means of following the anemic fetus is the evaluation of changes in the middle cerebral artery peak systolic flow velocity (MCA-PSV). This is a sensitive tool for both the evaluation of fetal anemia and response to treatment. Intracerebral vessels respond earliest to the fetal anemic state, and are readily accessible for ultrasound examination. We describe the methodology and evolving clinical applications of MCA-PSV measurement in the fetus, through an overview of the literature describing the development and application of MCA-PSV measurement in fetuses at risk of fetal anemia of various immune and nonimmune etiologies, illustrated by index cases from our center. MCA-PSV measurement is essential in the diagnosis, evaluation, and management of cases of fetal anemia. The use of this modality lessens the need for invasive procedures. The method is readily accessible and should be integrated into the repertoire of all obstetric ultrasound centers. Copyright © 2006 John Wiley & Sons, Ltd.     

A comparison of X-ray fluorescence and wet chemical analysis of air filter samples from a scrap lead smelting operation

Personal and area air samples were taken at a scrap lead smelter operation in a bullet manufacturing facility. Samples were taken using the 37-mm styrene-acrylonitrile closed-face filter cassette (CFC, the current US standard device for lead sampling), the 37-mm GSP or "cone" sampler, the 25-mm Institute of Occupational Medicine (IOM) inhalable sampler, and the 25-mm Button sampler (developed at the University of Cincinnati). Polyvinylchloride filters were used for sampling. The filters were pre- and post-weighed, and analyzed for lead content using a field-portable X-ray fluorescence (XRF) analyzer. The filters were then extracted with dilute nitric acid in an ultrasonic extraction bath and the solutions were analyzed by inductively coupled plasma optical emission spectroscopy. The 25-mm filters were analyzed using a single XRF reading, while three readings on different parts of the filter were taken from the 37-mm filters. The single reading from the 25-mm filters was adjusted for the nominal area of the filter to obtain the mass loading, while the three readings from the 37-mm filters were inserted into two different algorithms for calculating the mass loadings, and the algorithms were compared. The IOM sampler was designed for material collected in the body of the sampler to be part of the collected sample as well as that on the filter. Therefore, the IOM sampler cassettes were rinsed separately to determine if wall-loss corrections were necessary. All four samplers gave very good correlations between the two analytical methods above the limit of detection of the XRF procedure. The limit of detection for the 25-mm filters (5 microg) was lower than for the 37-mm filters (10 microg). The percentage of XRF results that were within 25% of the corresponding ICP results was evaluated. In addition, the bias from linear regression was estimated. Linear regression for the Button sampler and the IOM sampler using single readings and the GSP using all tested techniques for total filter loading gave acceptable XRF readings at loadings equivalent to sampling at the OSHA 8-hour Action Level and Permissible Exposure Limit. However, the CFC only had acceptable results when the center reading corrected for filter area was used, which was surprising, and may be a result of a limited data set. In addition to linear regression, simple estimation of bias indicated reasonable agreements between XRF and ICP results for single XRF readings on the Button sampler filters, (82% of the individual results within criterion), and on the IOM sampler filters (77% or 61%--see text), and on the GSP sampler filters using the OSHA algorithm (78%). As a result of this pilot project, all three samplers were considered suitable for inclusion in further field research studies.     

Microphthalmia–prenatal ultrasonic diagnosis: A case report

Prenatal real-time ultrasonographic diagnosis of microphthalmia is presented. Diagnosis was made at 18 weeks' gestation in a fetus of a patient with a previous infant affected with the syndrome of cryptophthalmia with absence of septum nasi and ambiguous genitalia (Fraser syndrome). Recognition of microphthalmia as a part of Fraser syndrome and the easy visualization of fetal facial bones and orbits in the second trimester made the diagnosis possible.     

Sonographic diagnosis of cystic adenomatoid malformation in-utero

Routine ultrasound examination at 30 weeks gestation revealed an intrapulmonary cystic mass in an otherwise normal fetus. Following delivery at term, the diagnosis of congenital cystic adenomatoid malformation of the right lung was confirmed, and an elective right middle lobectomy successfully performed at nine days of age.     

Chorionic villus sampling—short-term versus long-term culture in a subtle 2; 18 translocation

Prenatal diagnosis on chorionic villous tissue was performed for a woman with the karyotype 46,XX,t(2;18)(q32;q12)—a subtle ‘difficult’ translocation. The case illustrates the necessity of good quality cytogenetics for accurate prenatal diagnosis. For chorionic villi this can be obtained only with long-term culture.     

Wetland loss and substitution by the Section 404 permit program in southern California,USA

To test the effectiveness of the 404 permit program in preventing a net loss of wetland resources, 75 Section 404 projects permitted in the years 1987–1989 and located in a portion of southern California were evaluated. From this group of projects, 80.47 ha of wetlands were affected by Section 404 permits and the Army Corps of Engineers required 111.62 ha of wetland mitigation. To verify the successful completion of each mitigation project, all 75 project sites were visited and evaluated based on the amount of dead vegetation, growth and coverage, and the number of invasive species. Based on the field verification results, the actual amount of completed mitigation area was 77.33 ha, resulting in a net loss of 3.14 ha of wetland resources in the years 1987–1989. By comparing the types of wetlands lost to the types of wetlands mitigated, it is apparent that, in particular, freshwater wetlands are experiencing a disproportionately greater loss of area and that riparian woodland wetlands are most often used in mitigation efforts. The net result of these accumulated actions is an overall substitution of wetland types throughout the region. Results also indicate that, typically, large-scale mitigation projects are more successful compared to smaller projects and that successful compliance efforts are not evenly distributed throughout the region. We recommend that better monitoring, mitigation in-kind, mitigation banking, and planning on a regional or watershed scale could greatly improve the effectiveness of the Section 404 permitting program.     

Development of Layered Sediment Structure and its Effects on Pore Water Transport and Hyporheic Exchange

Hyporheic exchange is known to provide an important control on nutrient and contaminant fluxes across the stream-subsurface interface. Similar processes also mediate interfacial transport in other permeable sediments. Recent research has focused on understanding the mechanics of these exchange processes and improving estimation of exchange rates in natural systems. While the structure of sediment beds obviously influences pore water flow rates and patterns, little is known about the interplay of typical sedimentary structures, hyporheic exchange, and other transport processes in fluvial/alluvial sediments. Here we discuss several processes that contribute to local-scale sediment heterogeneity and present results that illustrate the interaction of overlying flow conditions, the development of sediment structure, pore water transport, and stream-subsurface exchange. Layered structures are shown to develop at several scales within sediment beds. Surface sampling is used to analyze the development of an armor layer in a sand-and-gravel bed, while innovative synchrotron-based X-ray microtomography is used to observe patterns of grain sorting within sand bedforms. We show that layered bed structures involving coarsening of the bed surface increase interfacial solute flux but produce an effective anisotropy that favors horizontal pore water transport while limiting vertical penetration.