Biosynthesized silver nanoparticles regulate the iron status in the spleen of Plasmodium chabaudi–infected mice

Environmental Science and Pollution Research - Malaria is a dangerous disease affecting millions around the globe. Biosynthesized nanoparticles are used against a variety of diseases including...     

Residues of PCDD,PCDF, and PCBs in some marine organisms in Lake Temsah,Ismailia, Egypt

Residues of PCDDs/F, non-ortho, mono-ortho PCBs, and other PCBs were monitored in the tissues of mullet fish, bolti fish, bivalves and crab taken from Lake Temsah, at Ismailia, Egypt.

Results showed that 2,3,7,8 Tetra CDD and 1,2,3,7,8 Penta CDD were the most frequently detected PCDD congeners. Similarly, 2,3,7,8 Tetra CDF, 1,2,3,7,8 Penta CDF and 2,3,4,7,8 Penta CDF were the most frequently detected PCDF congeners. No relationship was apparent between the concentrations of detected PCDDs congeners and the degree of chlorination, except with crab samples in which an increase in the chlorination coincided with a decrease in the concentrations of the congeners.

In PCDF congeners, detected residues have had a reversed relationship with chlorination increase. In PCDD congeners, Octa CDD had the highest detected concentrations in the two fish species, while in the bivalves and crab, 2,3,7,8 Tetra CDD had the highest concentrations. The mullet fish had the highest total PCDDs concentration, at 0.398?pg/g fresh weight, followed by crab at 0.395?pg/g fresh weight, then bivalves and bolti fish at 0.187 and 0.062?pg/g fresh weight, respectively. In all the examined organisms, the total concentrations of PCDFs were much higher than the total concentrations of the PCDD congeners. The WHO–TEQ values were 11.92, 39.12, 25, and 3.6?pg/g fresh weight, for mullet fish, bolti fish, bivlaves and crab, respectively. The concentration of the mono-ortho congeners CB 118 was the highest detected of all non-ortho and mono-ortho PCBs congeners, with values of 0.382, 0.022, 0.231 and 0.357?ng/g fresh weight, in mullet fish, bolti fish, bivalves and crab, respectively. The WHO–TEQ concentrations were 0.799, 0.003?pg/g fw, 0.05?pg/g fresh weight, 0.676?pg/g, and 0.799?pg/g fresh weight, for the same species, respectively. The total concentration of PCBs 28, 52, 95, 99, 101, 105, 110, 118, 138, 146, 149, 151, 153, 170, 177, 180, 187 were 6.86?ng/g fresh weight for mullet fish, 0.2?ng/g fresh weight, for bolti fish, 2.72?ng/g fresh weight for bivalves and 2.8?ng/g fresh weight for crab, respectively.     

Comparative efficacy of certain plant extracts alone and combination with profenofos against Spodoptera littoralis (Boisd.) (Lepidoptera: Noctuidae)

Ethyl alcohol, acetone, and petroleum ether extracts of three plant species belonging to three different botanical families [Strychnos nux-vomica (Loganiaceae), Euphorbia lathyrus (Euphorbiaceae), and Datura stramonlum (Solanaceae)], a chemical insecticide; profenofos and their combinations were tested against second and fourth instars of Spodoptera littoralis under lab conditions. Results revealed that the ethanol extract of S. nux-vomica was the most effective among all plant extracts, where the corrected mortality% were 92, 81, 58, and 27% to 2nd instar and 89, 74, 34, and 11% to 4th instar at concentrations 0.5, 0.25, 0.125, and 0.0625%, respectively. Calculated LC₅₀'s were 0.11, 0.22, and 0.34% to 2nd instar and 0.17, 0.37, and 0.52% to 4th instar for ethanol, petroleum ether, and acetone extracts, respectively. Acetone extracts of all plants were of lower effect. The chemical insecticide profenofos displayed higher efficacy than plant extracts (LC₅₀ = 0.002 and 0.003% for S. littoralis 2nd and 4th larval instars, respectively). The co-toxicity factor reached 76 and 60 when mixing S. nux-vomica + profenofos and D. stramonlum + profenofos at ratio 1:1 against S. littoralis 2nd instar larvae, thus indicating a potentiating effect. While treatment of the 4th instar larvae by the same mixtures resulted in a co-toxicity factor below 20 at all mixing ratios indicating, only, an additive effect against this instar.     

Estimating Potential Climate Change Effects on the Upper Neuse Watershed Water Balance Using the SWAT Model

Climate change poses water resource challenges for many already water stressed watersheds throughout the world. One such watershed is the Upper Neuse Watershed in North Carolina, which serves as a water source for the large and growing Research Triangle Park region. The aim of this study was to quantify possible changes in the watershed’s water balance due to climate change. To do this, we used the Soil and Water Assessment Tool (SWAT) model forced with different climate scenarios for baseline, mid‐century, and end‐century time periods using five different downscaled General Circulation Models. Before running these scenarios, the SWAT model was calibrated and validated using daily streamflow records within the watershed. The study results suggest that, even under a mitigation scenario, precipitation will increase by 7.7% from the baseline to mid‐century time period and by 9.8% between the baseline and end‐century time period. Over the same periods, evapotranspiration (ET) would decrease by 5.5 and 7.6%, water yield would increase by 25.1% and 33.2%, and soil water would increase by 1.4% and 1.9%. Perhaps most importantly, the model results show, under a high emission scenario, large seasonal differences with ET estimated to decrease by up to 42% and water yield to increase by up to 157% in late summer and fall. Planning for the wetter predicted future and corresponding seasonal changes will be critical for mitigating the impacts of climate change on water resources.     

Investigation the effect of adding graphene oxide into diesel/higher alcohols blends on a diesel engine performance

ABSTRACT

This article aims to study the influence of the addition of graphene oxide nanoparticles (GO) to diesel/higher alcohols blends on the combustion, emission, and exergy parameters of a CI engine under various engine loads. The higher alcohols mainly n-butanol, n-heptanol, and n-octanol are blended with diesel at a volume fraction of 50%. Then, the 25 and 50 mg/L concentrations of GO are dispersed into diesel/higher alcohols blends using an ultrasonicator. The GO structures are examined using TEM, TGA, XRD and FTIR. The findings show that there is a reduction in p_max. and HRR when adding higher alcohols with diesel fuel. Regarding engine emission, there is a significant improvement in emissions formation with adding higher alcohols. The addition of GO into diesel/higher alcohols blends improves the brake thermal efficiency by 15%. Moreover, the p_max. and HRR are both enhanced by 4%. The CO, UHC and smoke formation are reduced considerably by 40%, 50 and 20%, respectively, while NO_x level is increased by 30% with adding GO. Finally, adding high percentages of n-butanol, n-heptanol, and n-octanol with diesel fuel with the presence of GO has the potential to achieve ultra-low CO, UHC, and smoke formation meanwhile keeping high thermal efficiency level.     

Wastewater treatment by catalytic wet air oxidation process over Al-Fe pillared clays synthesized using microwave irradiation

Microwave irradiation has been used to prepare Al, Fe-pillared clays from a natural Tunisian smectite from the El Hicha deposit (province of Gabes). Chemical analysis, XRD spectra and surface properties evidenced the success of pillaring process. The obtained solids present higher surface area and pore volume than conventionally prepared Al-Fe pillared clays. The main advantages of the microwave methodology are the considerable reduction of the synthesis time and the consumption of water. The microwave-derived Al-Fe pillared clays have been tested for catalytic wet air oxidation (CWAO) of phenol in a stirred tank at 160°C and 20 bar of pure oxygen pressure. These materials are efficient for CWAO of phenol and are highly stable despite the severe operating conditions (acidic media, high pressure, high temperature). The catalyst deactivation was also significantly hindered when compared to conventionally prepared clays. Al-Fe pillared clays prepared by microwave methodology are promising as catalysts for CWAO industrial water treatment.

Open image in new window

     

Assessment of metal contamination in soil banks of the Rhumel wadi (Northeast Algeria)

Levels of six trace metals were assessed in bank soils of the Rhumel wadi (Northeast Algeria) and their association with soil properties was investigated. Samples were collected at 10 sites. The soils are neutral to moderately alkaline, have high contents of carbonate, and are low in organic carbon and clay. Mean metal concentrations are 1.1 (Cd), 63 (Cr), 20 (Cu), 26 (Ni), 31 (Pb), and 98 (Zn) mg kg^?1. The Cd, Cu, Pb, and Zn contents in soil from sites closest to Constantine City were higher than in uncontaminated soils worldwide, indicating accumulation due to human activities (residential, industrial, and agricultural). Statistical analyses (correlation and principal component analysis) demonstrated that Cd, Pb, and Zn are of anthropogenic origin in the urban areas, whereas Cr and Cu enrichment in some situations is caused by industrial activities, while Ni was geogenic.     

Restoration and sequestration of carbon and nitrogen in the degraded northern coastal area in Nile Delta,Egypt for climate change mitigation

Most of coastal area in Nile Delta, Egypt, is salt-affected soils and have low carbon (C) and nitrogen (N) inputs as a result of declining vegetation growth and low net primary production. Therefore, this study amid to compare between C and N pools in degraded (uncultivated and salt-affected soil) and restored (cultivated and reclaimed 20 years ago) locations in North Nile Delta. and to examine the impact of cultivation on sequestering C and N pools in this area as one of the most important methods for mitigating climate change impacts. C and N pools increased significantly in surface soil from 2.99 and 0.43 Mgh^?1 in uncultivated sites to 19.26 and 1.66 Mgh^?1 in cultivated ones as salinity was reduced and net primary production was increased due to leaching and reclamation. Particulate (associated with sand) and nonparticulate (associated with clay +silt) soil organic C or N was significantly higher cultivated sites. In addition, nonparticulate organic C or N was lower than particulate part indicating and supporting the strong relationship between organic matter and clay. The sequestration rate (in approximately 1 m profile) was 1.69 and 0.14 Mgh^?1 yr.^?1 C and N pools respectively. Although the cultivation is leading to loss of organic matter in some areas; C and N in this coastal area are partially restored and stored. Therefore, restoration and appropriate management practices will lead to mitigate the negative impacts of climate change in this area.     

Spatial patterns of heavy metals in soil under different geological structures and land uses for assessing metal enrichments

One hundred and thirty composite soil samples were collected from Hamedan county, Iran to characterize the spatial distribution and trace the sources of heavy metals including As, Cd, Co, Cr, Cu, Ni, Pb, V, Zn, and Fe. The multivariate gap statistical analysis was used; for interrelation of spatial patterns of pollution, the disjunctive kriging and geoenrichment factor (EF_G) techniques were applied. Heavy metals and soil properties were grouped using agglomerative hierarchical clustering and gap statistic. Principal component analysis was used for identification of the source of metals in a set of data. Geostatistics was used for the geospatial data processing. Based on the comparison between the original data and background values of the ten metals, the disjunctive kriging and EF_G techniques were used to quantify their geospatial patterns and assess the contamination levels of the heavy metals. The spatial distribution map combined with the statistical analysis showed that the main source of Cr, Co, Ni, Zn, Pb, and V in group A land use (agriculture, rocky, and urban) was geogenic; the origin of As, Cd, and Cu was industrial and agricultural activities (anthropogenic sources). In group B land use (rangeland and orchards), the origin of metals (Cr, Co, Ni, Zn, and V) was mainly controlled by natural factors and As, Cd, Cu, and Pb had been added by organic factors. In group C land use (water), the origin of most heavy metals is natural without anthropogenic sources. The Cd and As pollution was relatively more serious in different land use. The EF_G technique used confirmed the anthropogenic influence of heavy metal pollution. All metals showed concentrations substantially higher than their background values, suggesting anthropogenic pollution.