Moss bags as sentinels for human safety in mercury-polluted groundwaters

An equation to estimate Hg concentrations of <4 μg/L in groundwaters of a polluted area in NE Italy was set out by using transplants of the aquatic moss Rhynchostegium riparioides as trace element bioaccumulators. The equation is derived from a previous mathematical model which was implemented under laboratory conditions. The work aimed at (1) checking the compliance of the uptake kinetics with the model, (2) improving/adapting the model for groundwater monitoring, (3) comparing the performances of two populations of moss collected from different sites, and (4) assessing the environmental impact of Hg contamination on a small river. The main factors affecting Hg uptake in the field were—as expected—water concentration and time of exposure, even though the uptake kinetics in the field were slightly different from those which were previously observed in the lab, since the redox environmental conditions influence the solubility of cationic Fe, which is a negative competitor of Hg²⁺. The equation was improved by including the variable ‘dissolved oxygen concentration’. A numerical parameter depending on the moss collection site was also provided, since the differences in uptake efficiency were observed between the two populations tested. Predicted Hg concentrations well fitted the values measured in situ (approximately ±50 %), while a notable underestimation was observed when the equation was used to predict Hg concentration in a neighbouring river (?96 %), probably due to the organic pollution which hampers metal uptake by mosses.     

Co-polymerization of penta-halogenated phenols in humic substances by catalytic oxidation using biomimetic catalysis

Introduction

A synthetic water-soluble meso-tetra(2,6-dichloro-3-sulfonatophenyl)porphyrinate of iron(III) chloride, Fe-(TDCPPS)Cl, was employed to catalyze the oxidative co-polymerization of penta-halogenated phenols in two humic materials of different origin.

Materials and methods

Co-polymerization of pentachlorophenol (PCP) was followed by high-performance size-exclusion chromatography (HPSEC), the unbound PCP recovered from reacting humic solutions was evaluated by gas-chromatography/electron capture detector, and the oxidative catalyzed coupling of pentafluorophenol (PFP) into humic matter was assessed by liquid-state ¹⁹F-NMR spectroscopy. HPSEC showed that the catalyzed oxidative coupling between PCP and humic molecules increased the apparent weight-average molecular weight (M _w) values in both humic substances.

Results and discussion

HPSEC further indicated that the co-polymerization reaction turned the loosely bound humic supramolecular structures into more stable conformations, which could no longer be disrupted by the disaggregating effect of acetic acid. The occurrence of covalent linkages established between PCP and humic molecules was also suggested by the very little amount of PCP found free in solution after the catalyzed co-polymerization. ¹⁹F-NMR spectroscopy suggested that also PFP could be oxidatively coupled to humic materials. PFP-humic co-polymerization reaction produced ¹⁹F-spectra with many more ¹⁹F signals and wider chemical shifts spread than for PFP alone or PFP subjected to catalyzed coupling without humic matter.

Conclusions

These findings show that biomimetic iron-porphyrin is an efficient catalyst for the covalent binding of polyhalogenated phenols to humic molecules, thereby suggesting that the co-polymerization reaction may become a useful technology to remediate soils and waters contaminated by polyhalogenated phenols and their analogues.     

End-of-Life Vehicles management: Italian material and energy recovery efficiency

Each European Member State must comply with Directive 2000/53/EC recycling and recovery targets by 2015, set to 85% and 95%, respectively. This paper reports a shredder campaign trial developed and performed in Italy at the beginning of 2008. It turns out to be the first assessment about the critical aspects belonging to the Italian End-of-Life Vehicles (ELVs) reverse supply chain involving 18 dismantling plants, a shredder plant and 630 ELV representatives of different categories of vehicles treated in Italy during 2006. This trial aims at improving the experimental knowledge related to ELVs added waste, pre-treatment, part reuse, recycling and final metal separation and car fluff disposal. Finally, the study also focuses on the calculation of the effective Italian ELV recycling rate, which results equal to 80.8%, and auto shredder residue (ASR) characterization. According to the results obtained in this work, ASR still contains up to 8% of metals and 40% of polymers that could be recovered. Moreover, physical-chemical analysis showed a Lower Heat Value of almost 20,000 kJ/kg and revealed the presence of pollutants such as heavy metals, mineral oils, PCBs and hydrocarbons.     

Material and energy recovery in integrated waste management systems: a life-cycle costing approach

A critical assumption of studies assessing comparatively waste management options concerns the constant average cost for selective collection regardless the source separation level (SSL) reached, and the neglect of the mass constraint. The present study compares alternative waste management scenarios through the development of a desktop model that tries to remove the above assumption. Several alternative scenarios based on different combinations of energy and materials recovery are applied to two imaginary areas modelled in order to represent a typical Northern Italian setting. External costs and benefits implied by scenarios are also considered. Scenarios are compared on the base of the full cost for treating the total waste generated in the area. The model investigates the factors that influence the relative convenience of alternative scenarios.     

Ecological footprint analysis applied to a sub-national area: the case of the Province of Siena (Italy)

This work is part of a larger project, which aims at investigating the environmental sustainability of the Province of Siena and of its communes, by means of different indicators and methods of analysis. The research presented in this article uses ecological footprint and biocapacity as indicators to monitor the environmental conditions of the area of Siena, thus complementing previous studies carried out using Emergy, greenhouse gases balance and other methods. The calculations have been performed in such a way as to enable a disaggregation of the final results according to the classical categories of ecologically productive land and of consumption, but also according to citizen's and public administration's areas of influence. This information allows us to investigate in detail the socio-economic aspects of environmental resource use. Among the notable results, the Siena territory is characterized by a nearly breakeven total ecological balance, a result contrasting with the national average and most of the other Italian provinces. Furthermore, the analysis has been carried out at different spatial scales (province, districts and communes), highlighting an inhomogeneous territorial structure consisting of subareas in ecological deficit compensated by zones in ecological surplus.     

Remediation of heavy metals contaminated soils by ball milling

In the present work, the use of ball milling reactors for the remediation of lead contaminated soils was investigated. Lead immobilization was achieved without the use of additional reactants but only through the exploitation of weak transformations induced on the treated soil by mechanical loads taking place during collisions among milling media. The degree of metal immobilization was evaluated by analyzing the leachable fraction of Pb(II) obtained through the "synthetic precipitation leaching procedure". The reduction of leachable Pb(II) from certain synthetic soils, i.e., bentonitic, sandy and kaolinitc ones, was obtained under specific milling regimes. For example, for the case of bentonitic soils characterized by a Pb(II) concentration in the solid phase equal to 954.4 mg kg(-1), leachable Pb(II) was reduced, after 7 h of mechanical treatment, from 1.3 mg l(-1) to a concentration lower than the USEPA regulatory threshold (i.e., 0.015 mg l(-1) for drinkable water). Similar results were obtained for sandy and kaolinitic soils. X-ray diffraction, scanning electron microscopy, electron dispersive spectroscopy and granulometric analyses revealed no significant alterations of the intrinsic character of sandy and bentonitic soils after milling except for a relatively small increase of particles size and a partial amorphization of the treated soil. On the other hand, the mechanical treatment caused the total amorphization of kaolinitic soil. The increase of immobilization efficiency can be probably ascribed to specific phenomena induced by mechanical treatment such as entrapment of Pb(II) into aggregates due to aggregation, solid diffusion of Pb(II) into crystalline reticulum of soil particles as well as the formation of new fresh surfaces (through particle breakage) onto which Pb(II) may be irreversibly adsorbed.     

Environmental and economic evaluation of natural capital appropriation through building construction: practical case study in the Italian context

This paper focuses on appropriation of natural capital through construction of buildings. The ecological footprint and the Costanza natural capital concepts are applied. The environmental consequences of human settlement are currently of great concern, and a need is felt to reduce the impact of building on the environment. The embodied energy of building materials and the "land area" required to sustain their production are considered to evaluate the demand on nature of this activity. The ecological footprints of 2 typical Italian buildings are compared. The paper also focuses on how to reduce the natural capital appropriation of building construction by means of environmentally inexpensive materials, renewable energy resources, and optimization of the use of bioproductive land by construction of multistoried buildings. Finally, to allocate an environmental load of buildings, an economic evaluation of natural capital appropriation through building construction is proposed.     

Need for a global map of forest naturalness for a sustainable future

There is a growing need to assess and monitor forest cover and its conservation status over global scales to determine human impact on ecosystems and to develop sustainability plans. Recent approaches to measure regional and global forest status and dynamics are based on remotely sensed estimates of tree cover. We argue that tree cover should not be used to assess the area of forest ecosystems because tree cover is an undefined subset of forest cover. For example, tree cover can indicate a positive trend even in the presence of deforestation, as in the case of plantations. We believe a global map of forest naturalness that accounts for the bio-ecological integrity of forest ecosystems, for example, intact forests, old-growth forest patches, rewilding forests (exploited forest landscapes undergoing long-term natural succession), and managed forests is needed for global forest assessment.