Size and XAD fractionations of trihalomethane precursors from soils

Soil organic matter is an important source of allochthonous dissolved organic matter inputs to the Sacramento-San Joaquin Delta waterways, which is a drinking water source for 22 million people in California, USA. Knowledge of trihalomethane (THM) formation potential of soil-derived organic carbon is important for developing effective strategies for organic carbon removal in drinking water treatment. In this study, soil organic carbon was extracted with electrolytes (deionized H2O and Na- or Ca-based electrolytes) of electrical conductivity bracketing those found in Delta leaching and runoff conditions. The extracts were physically and chemically separated into different fractions: colloidal organic carbon (0.45-0.1 microm), fine colloidal organic carbon (0.1-0.025 microm), and dissolved organic carbon (DOC) (<0.025 microm); hydrophobic acid (HPOA), transphilic acid, and hydrophilic acid. Two representative Delta soils, Rindge Muck (a peat soil) and Scribner Clay Loam (a mineral soil) were examined. Results showed that less than 2% of soil organic carbon was electrolyte-extractable and heterogeneous organic fractions with distinct THM reactivity existed. Regardless of soil and electrolytes, DOC and HPOA fractions were dominant in terms of total concentration and THMFP. The amounts of extractable organic carbon and THMFP were dependent on the cation and to a lesser extent on electrical conductivity of electrolytes. Along with our previous study on temperature and moisture effects on DOC production, we propose a conceptual model to describe the impacts of agricultural practices on DOC production in the Delta. DOC is mainly produced in the surface peat soils during the summer and is immobilized by accumulated salt in the soils. DOC is leached from soils to drainage ditches and finally to the Delta channels during winter salt leaching practices.     

Practitioner insights as a means of setting a context for conservation

A key obstacle to conservation success is the tendency of conservation professionals to tackle each challenge individually rather than collectively and in context. We sought to prioritize barriers to conservation previously described in the conservation literature. We undertook an online survey of 154 practitioners from over 70 countries to ascertain the most important barriers to conservation they faced. We used statistical analyses to identify the key impediments to conservation success and to examine whether these were affected by organizational attributes. Twenty-one barriers were identified. The importance ascribed to those was influenced by continent of operation and organization size, but not by organization age or autonomy (from larger parent organizations). We found the most important barriers to consider when undertaking conservation action were wider issues (e.g., population growth, consumerism, favoring development, and industrial-scale activity), operating environment (e.g., lack of political will, ineffective law enforcement, weak governments, corruption, safety and security), community attributes (e.g., dynamics, conflicts, and education levels), and the way conservation is undertaken (overconfidence, lack of funding, and externally set agendas). However, we advise against applying a one-size-fits-all approach. We propose that conservationists account for the complex socioecological systems they operate in if they are to achieve success.     

Diel periodicity of pheromone release by females of Planococcus citri and Planococcus ficus and the temporal flight activity of their conspecific males

The diel periodicity of sex pheromone release was monitored in two mealybug species, Planococcus citri and Planococcus ficus (Hemiptera; Pseudococcidae), using sequential SPME/GCMS analysis. A maximal release of 2 ng/h pheromone by 9–12-day-old P. citri females occurred 1–2 h before the beginning of photophase. The highest release of pheromone by P. ficus females was 1–2 ng/2 h of 10–20-day-old females, approximately 2 h after the beginning of photophase. Mating resulted in termination of the pheromone release in both mealybug species. The temporal flight activity of the males was monitored in rearing chambers using pheromone baited delta traps. Males of both P. citri and P. ficus displayed the same flight pattern and began flying at 06:00 hours when the light was turned on, reaching a peak during the first and second hour of the photophase. Our results suggest that other biparental mealybug species display also diel periodicities of maximal pheromone release and response. Direct evaluation of the diel periodicity of the pheromone release by the automatic sequential analysis is convenient and will be very helpful in optimizing the airborne collection and identification of other unknown mealybug pheromones and to study the calling behavior of females. Considering this behavior pattern may help to develop more effective pheromone-based management strategies against mealybugs.     

垂直流人工湿地系统中水流规律的研究

对一种新型的垂直流人工湿地系统的水流特性进行了研究。考察了系统的运行状况及介质中滞留区的分布范围，并且运用化学工程中反应器理论，采用示踪剂试验的方法得到了垂直流人工湿地系统的停留时间分布与污水的实际停留时间。根据水流停留时间分布函数对系统实际液流流态进行了数学模拟，提出二级串联的理想完全混合反应器（CSTR）模型能够较好地模拟垂直流人工湿地系统中水流的流动形态。     

垂直流人工湿地水力学特点对污水净化效果的影响

通过在污水中加入示踪剂,研究了人工湿地的水力学特点及其对污水净化效果的影响规律.结果表明,影响水力学各特点的主要原因是湿地植物根系所造成的物理学和生物学上的效应.水力学各特点与污水净化效果之间存在着密切关系:出水快、出水量大的系统具有较好的净化效果;除无植物系统外,停留时间较长的系统有较好的净化效果;容水体积大的系统净化效果也较好;水力负荷则主要通过影响其他各水力学特点而影响净化效果.结果表明,对水力学特点的优化将极大地促进污水净化效果的提高.     

Effectiveness of a fixed-depth sensor deployed from a buoy to estimate water-column cyanobacterial biomass depends on wind speed

Water quality sondes have the advantage of containing multiple sensors,extended deployment times,high temporal resolution,and telecommunication with stakeholder accessible data portals.However,sondes that are part of buoy deployments often suffer from typically being fixed at one depth.Because water treatment plants are interested in water quality at a depth of the water intake and other stakeholders (ex.boaters and swimmers) are interested in the surface,we examined whether a fixed depth of app...     

The effect of ventilation on spontaneous heating of coal

Ventilation plays an important role in the spontaneous heating of coal in an underground coal mine. If the ventilation rate is too high, heat is carried away by convection. If the ventilation rate is too low, the reaction rate becomes oxygen-limited. The effect of ventilation on the spontaneous heating of coal was investigated in an isothermal oven in this study. Experiments were conducted on three U.S. coal samples with ventilation rates ranging from 100 to 500 cm³/min. Experiments under ventilation were conducted to determine the critical ambient temperature, which is the minimum oven temperature required for a coal sample to achieve thermal runaway. Spontaneous heating tests were then conducted at various ventilation rates at the critical ambient temperature and the results were compared with spontaneous heating tests without ventilation. It was found that there is an optimum ventilation flow to produce the maximum rate of temperature rise at the critical ambient temperature. When the coal sample particle size was increased, a higher critical ambient temperature was required. The results in this study have application in the prevention of spontaneous combustion in underground coal mines.     

Accounting for Cadmium: Tracking Emissions of Cadmium From the Global Economy

This paper examines the flow of cadmium through the global economy, with the aim of quantifying emissions of cadmium into the environment as a result of anthropogenic activities. First, a materials balance methodology is presented as the most appropriate means of assessing cadmium emissions from a wide range of anthropogenic sources. This is then applied to the best available data, from a variety of sources, to arrive at estimated flows of cadmium. Results are presented for 10 geo-political world regions and for a range of economic activities including non-ferrous metals production, iron and steel production, combustion of fossil fuels, fertilizer manufacture and use, cement production and the manufacture, use and disposal of cadmium containing products. Initially, this analysis partitions the total flow of cadmium into three major categories: atmospheric emissions, water-borne effluents and solid or bulked waste arisings. the paper then suggests a probable further partition of the initial emissions into different environmental media.