Evaluation of cetacean exposure to organotin compounds in Brazilian waters through hepatic total tin concentrations

In Brazil, there is no restriction to the use of organotins (OTs). Previous investigations have shown that hepatic ∑Sn in cetaceans is predominantly organic. Hepatic ∑Sn concentrations were determined by GFAAS in 67 cetaceans (13 species) that stranded on Rio de Janeiro (RJ) and Espirito Santo (ES) states. Concentrations (in ng/g wet wt.) of marine tucuxis (n = 20) from the highly contaminated Guanabara Bay (in RJ) varied from 1703 to 9638. Concentrations of three marine tucuxi foetuses and one newborn calf (all from Guanabara Bay) varied between 431 and 2107. Contrastingly, the maximum level among 19 oceanic dolphins was 346, and 15 out of these 19 specimens presented concentrations below detection limit. The levels of Sn in six marine tucuxis from a less contaminated area (ES) varied from below detection limit to 744. Comparing to the literature, coastal cetaceans from Brazil appear to be highly exposed to OTs.     

Variations in wood burning organic marker concentrations in the atmospheres of four European cities

The particulate emissions from biomass burning are a growing concern due to the recent evidence of their ubiquitous and important contribution to the ambient aerosol load. A possible strategy to apportion the biomass burning share of particulate matter is the use of organic molecular tracers. Anhydrosugars (levoglucosan, mannosan and galactosan), together with two organic acids (dehydroabietic and pimaric acids), were previously reported as organic markers for particulate wood burning emissions. These five compounds were studied in four European cities (Helsinki, Copenhagen, Birmingham and Oporto), at both a Roadside and an Urban Background station, during a summer and a winter campaign in the fine (PM(2.5)) and the coarse (PM(10-2.5)) size-fractions of the ambient aerosol. Levoglucosan concentrations were highest in the city of Oporto. In winter, levoglucosan was more present in the fine fraction but in summer, concentrations were similar in both size fractions. Levoglucosan concentrations in the fine size fraction were higher in winter, but no seasonal differences were observed for the coarse size fraction. The lack of difference between the Roadside and Urban Background levoglucosan concentrations points towards a regional nature of this type of pollution. Wood burning was estimated to contribute to about 3.1% of the winter PM(10) mass in Oporto, and to 3.7% in Copenhagen. Mannosan followed the trends exhibited by levoglucosan. The ratio between the levoglucosan and mannosan concentrations allowed determination of a preference for softwood over hardwood in all four cities. Galactosan, pimaric acid and dehydroabietic acid were found to be minor compounds.     

Physical and chemical characteristics of water from the hydrographic basin of the Poxim River, Sergipe State, Brazil

The Poxim River is one of Sergipe State’s major waterways. It supplies water to the State capital, Aracaju, but is threatened by urban and agricultural developments that compromise both the quantity and the quality of the water. This has direct impacts on the daily lives of the region’s population. In this work, a multivariate analytical approach was used to investigate the physical and chemical characteristics of the water in the river basin. Four sampling campaigns were undertaken, in November 2005, and in February, May, and September 2006, at 15 sites distributed along the Poxim. The parameters analyzed were conductivity, turbidity, color, total dissolved solids, dissolved oxygen, alkalinity, hardness, chlorophyll-a, and nutrients (total phosphorus, dissolved orthophosphate, nitrite, nitrate, ammoniacal nitrogen, and total nitrogen). Dissolved oxygen contents were very low in the Poxim-Açu River (1.0–2.8), the Poxim River (1.6–4.6), and the estuarine region (1.7–5.1), due to the dumping of wastes and discharges of domestic and industrial effluents containing organic matter into fluvial and estuarine regions of the Poxim. Factor analysis identified five components that were indicative of the quality of the water, and that explained 81.73 % of the total variance.     

Considering built environment and spatial correlation in modeling pedestrian injury severity

Objective: This study looks at mitigating and aggravating factors that are associated with the injury severity of pedestrians when they have crashes with another road user and overcomes existing limitations in the literature by focusing attention on the built environment and considering spatial correlation across crashes.

Method: Reports for 6,539 pedestrian crashes occurred in Denmark between 2006 and 2015 were merged with geographic information system resources containing detailed information about the built environment and exposure at the crash locations. A linearized spatial logit model estimated the probability of pedestrians sustaining a severe or fatal injury conditional on the occurrence of a crash with another road user.

Results: This study confirms previous findings about older pedestrians and intoxicated pedestrians being the most vulnerable road users and crashes with heavy vehicles and in roads with higher speed limits being related to the most severe outcomes. This study provides novel perspectives by showing positive spatial correlations of crashes with the same severity outcomes and emphasizing the role of the built environment in the proximity of the crash.

Conclusions: This study emphasizes the need for thinking about traffic calming measures, illumination solutions, road maintenance programs, and speed limit reductions. Moreover, this study emphasizes the role of the built environment, because shopping areas, residential areas, and walking traffic density are positively related to a reduction in pedestrian injury severity. Often, these areas have in common a larger pedestrian mass that is more likely to make other road users more aware and attentive, whereas the same does not seem to apply to areas with lower pedestrian density.     

Mercury human exposure through fish consumption in a reservoir contaminated by a chlor-alkali plant: Babeni reservoir (Romania)

Purpose  

Chlor-alkali plants are one of the most important point sources of mercury to aquatic environment. The problem of Hg contamination has been studied in a region, Rm Valcea (Romania), impacted by the wastewater discharge of a chlor-alkali plant. The purpose of the present study is to evaluate the current status of mercury pollution in the Babeni reservoir (Olt River) and the exposure of local population via fish consumption to mercury originating from the chlor-alkali plant.     

On the effect of MSW moisture content on meeting target recycling rates

A mathematical model to calculate the recycle rates for packaging materials from the municipal solid wastes (MSW) built from the dry mass values that are obtained from the corresponding wet masses and their respective moisture contents is presented in this work. A possible universal methodology is also described to be used with the previous model so that reliable comparisons between indicators for different regions are feasible. Furthermore, this mathematical model demonstrates the effect of the moisture content of packaging materials on their recycling rates and constitutes a fundamental tool for operators and persons responsible for MSW management to define new policies and technical measures viewing the improvement of recycling rates. A theoretical study and the application of the model to the MEMSW of the Lisbon region shows that the moisture content of the mixed wastes plays a dominant role in the recycling rates of packaging materials such as paper, plastics and glass. Moreover, accounting for all relevant masses in the dry basis yields higher recycling rate values: increases of 32.8% for paper, 50% for plastics and 44.6% glass are observed.     

Evolution of biodegradation of deinking by-products used as alternative cover material

Deinking by-products (DBP) have been used as alternative cover material for landfills and mine tailings. Since DBP is biodegradable because of its high cellulose and hemicellulose content, a laboratory experimental program was performed to monitor the evolution of biodegradation and changes in the physico-chemical and geotechnical properties of DBP samples submitted to accelerated biodegradation for 1460 days at 38 degrees C. The evolution of gas and leachate production was monitored in terms of both quality and quantity, which allowed for the calculation of mass loss with time. Under the conditions of the tests (no load applied), 19.6% of the mass was lost as gas, whereas 6.1% was leached out. The results show that biodegradation did not significantly alter the compaction behavior of DBP. The void ratio and water content increased significantly, while the volume of the samples slightly decreased. This seem to indicate that the porous structure of the samples was no longer the same after 1460 d of accelerated biodegradation. A slight increase in the relative density indicates that the organic/inorganic matter ratio increased. The results of permeability tests performed with samples at various stages of biodegradation and at various confining stresses show that the saturated hydraulic conductivity of recompacted biodegraded DBP decreased from 7 x 10(-7)cm/s to approximately 2 x 10(-7)cm/s, as biodegradation advanced.     

Irradiation of sorbents by ions of polymorphic metals for modeling <Superscript>90</Superscript>strontium sedimentation

Background, Aims and Scope Advances in radioecology can support improvements in environmental remediation technologies, especially by illuminating interaction processes between polymorphic metal radionuclides and various materials and their ions in aqueous solutions. This study modeled interaction processes of ⁹⁰Sr with transitive metals to delineate the behavior of polymorphic metal radionuclides. Experimental and modeling results confirmed Sr sedimentation was sensitive to the physical impact of radionuclides on various sorbents and possible chemical reactions occurring between the radionuclides and sorbents. Methods Models were developed to simulate ⁹⁰Sr sedimentation process, and the potential physical and chemical reactions accompanying the process. Models were verified, inorganic salts were used as sorbents to absorb metal cations, activity levels were recorded before and after mixing the inorganic salts while the efficiency of sedimentation using the heavy metals composites was quantified. Results and Discussion This research demonstrates that the process of the sedimentation is complex and occurs in several stages. Micro-structural analysis shows that zones of interaction between the sorbent and source metal are formed during the irradiation of the target’s metal surface. Electrical-microscopic analysis indicates that the composition of the formed zones of interaction of Ti (Sr) with target metals has various structures. Roentgenophase analysis indicates that the interaction of the ions of a precipitable source and a target occurs according to constitution diagrams of equilibrium systems. The results indicate that application of inorganic salts composites based on modeling increases the efficiency of the deactivation of aqueous solutions when compared to standard aluminum sulfate composite. Conclusions Experimental and modeling results confirm ⁹⁰Sr sedimentation is sensitive to the physical impact of radionuclides on various sorbents and possible chemical reactions occurring between the radionuclides and sorbents. The models support estimation of the physical impact of polymorphic metal radionuclides on various components of sorbents and possible chemical reactions occurring between the radionuclides and sorbents during the interaction. Inorganic salt composites deactivate and clear ⁹⁰Sr and Sr⁺² from water. This paper is openly accessible!