An estimate of the effectiveness of an in-vehicle automatic collision notification system in reducing road crash fatalities in South Australia

Objectives: The aim of this study was to estimate the potential effectiveness of an in-vehicle automatic collision notification (ACN) system in reducing all road crash fatalities in South Australia (SA).

Methods: For the years 2008 to 2009, traffic accident reporting system (TARS) data, emergency medical services (EMS) road crash dispatch data, and coroner's reports were matched and examined. This was done to initially determine the extent to which there were differences between the reported time of a fatal road crash in the mass crash data and the time EMS were notified and dispatched. In the subset of fatal crashes where there was a delay, injuries detailed by a forensic pathologist in individual coroner's reports were examined to determine the likelihood of survival had there not been a delay in emergency medical assistance.

Results: In 25% (N = 53) of fatalities in SA in the period 2008 to 2009, there was a delay in the notification of the crash event, and hence dispatch of EMS, that exceeded 10 min. In the 2-year crash period, 5 people were likely to have survived through more prompt crash notification enabling quicker emergency medical assistance. Additionally, 3 people potentially would have survived if surgical intervention (or emergency medical assistance to sustain life until surgery) occurred more promptly.

Conclusions: The minimum effectiveness rate of an ACN system in SA with full deployment is likely to be in the range of 2.4 to 3.8% of all road crash fatalities involving all vehicle types and all vulnerable road users (pedestrians, cyclists, and motorcyclists) from 2008 to 2009. Considering only passenger vehicle occupants, the benefit is likely to be 2.6 to 4.6%. These fatality reductions could only have been achieved through earlier notification of each crash and their location to enable a quicker medical response. This might be achievable through a fully deployed in-vehicle ACN system.     

Analysis of emission reduction in ethyne–biodiesel-aspirated diesel engine

The present experimental work investigates the use of ethyne gas in biodiesel-fueled diesel engine at different flow rate of 1, 2, and 3 L/min and is compared with diesel operation. This work is aimed to examine the outcome of ethyne gas by dual-fuel operation on emission characteristics of neat biodiesel-fueled stationary diesel engine. The oil derived from mustard seeds are employed as a source for biodiesel. The work was carried out at 2100 rpm (speed) and at an optimal compression ratio of 17. Based on the outcome of this investigation, the maximum reduction in hydrocarbon (25.1%), carbon monoxide (17.24%), and smoke emission (24.8%) was observed for biodiesel–ethyne at 3 L/min than the neat biodiesel. However, NO_x emissions were found to be 15.8% higher for ethyne–biodiesel fueling at 3 L/min owing to increase in combustion gas temperature than neat biodiesel.     

Building Trust in Natural Resource Management Within Local Communities: A Case Study of the Midewin National Tallgrass Prairie

Communities neighboring federally protected natural areas regularly weigh the costs and benefits of the administering agency’s programs and policies. While most agencies integrate public opinion into decision making, efforts to standardize and formalize public involvement have left many local communities feeling marginalized, spurring acrimony and opposition. A significant body of research has examined barriers to effective public participation as well as strategies for relationship building in planning processes; many of which point to trust as a key factor. Trust is especially tenuous in local communities. This paper explores perceptions of trust, expectations for management, as well as constraints to building trust. In-depth interviews were conducted with 21 community members and USDA Forest Service personnel at the Midewin National Tallgrass Prairie in northeastern Illinois. The interviews revealed that trust is perceived as important to effective management. Distinct expectations for management outcomes and processes emerged, including the values, knowledge, and capacity demonstrated in management decisions and actions and opportunities provided for communication, collaboration, and cooperation within the agency-community relationship. The case study identified several constraints to building trust, including competing values, knowledge gaps, limited community engagement, and staff turnover.     

Effects of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) metabolites on cricket (Acheta domesticus) survival and reproductive success

The effect of two major hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) metabolites, hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX) and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX), on cricket (Acheta domesticus) survival and reproduction was studied. RDX metabolites did not have adverse effects on cricket survival, growth, and egg production. However, MNX and TNX did affect egg hatching. MNX and TNX were more toxic in spiked-sand than in topical tests. TNX was more toxic to egg than MNX. Developmental stage and exposure time affected hatching. After 30 days exposure to MNX or TNX, the EC20, EC50, and EC95 were 47, 128, and 247 microg/g for TNX, and 65, 140, and 253 microg/g for MNX in topical tests. The ECs for 20, 50, and 95 were 21, 52, and 99 microg/g for MNX, and 12, 48, and 97 microg/g for TNX in sand. No gross abnormalities in cricket nypmhs were observed in all experiments indicating that neither TNX or MNX is teratogenic in this assay.     

Perchlorate in fish from a contaminated site in east-central Texas

Perchlorate, a known thyroid endocrine disruptor, contaminates surface waters near military instillations where solid fuel rocket motors are manufactured or assembled. To assess potential perchlorate exposure to fish and the human population which may feed on them, fish were collected around the Naval Weapons Industrial Reserve Plant in McLennan County, TX, and analyzed for the presence of the perchlorate anion. The sampling sites included Lake Waco and Belton Lake, and several streams and rivers within their watersheds. The general tendency was that perchlorate was only found in a few species sampled, and perchlorate was not detected in every individual within these species. When detected in the fish, perchlorate tissue concentrations were greater than that in the water. This may be due to highly variable perchlorate concentrations in the water coupled with individual-level variation in elimination from the body, or to routes of exposure other than water.     

Using diatoms to assess the impacts of prehistoric, pre-industrial and modern land-use on Danish lakes

The impact of contemporary agriculture on Danish lakes is acknowledged to be extreme. In particular, high loading of nutrients from agricultural soils contributes to the eutrophic conditions found in many of Denmark’s lakes. Palaeolimnological studies have shown that human disturbance of the Danish landscape since the introduction of agriculture around 6,000 years ago has had a major impact on lake ecosystems. The European Union’s Water Framework Directive requires an evaluation of reference conditions for lakes, the conditions expected with only minimal human impact. Monitoring data and palaeolimnological studies of Danish lakes demonstrate that many of the most detrimental effects of eutrophication have been experienced in recent decades. A new study has suggested that the reference status for Danish lakes may be set to the status in ad 1850–1900, probably providing attainable, realistic restoration targets for many sites. The aims of this study were to explore the impacts of past and contemporary land-use on Danish lakes, and to consider how appropriate the use of 1850 as a date to define reference status is for these sites. Catchment land-cover data for ad 1800, taken from historical maps, and sedimentary diatom assemblages of the same age, from dated sediment cores, were used to assess the impact of pre-industrial land-use on 20 Danish lakes. Analysis of contemporary land-cover data and surface-sediment diatom assemblages for the 20 sites was also made. In-lake total phosphorus (TP) concentrations were estimated using the sedimentary diatom assemblages and an existing calibration dataset for Danish lakes. The percentage of the lake catchment that was agricultural land in ad 1800 explained 8.8% of the total variation in the diatom data. The land-cover variables ‘built-up areas’ and ‘plantations’, together explained 16.9% of the variation in the diatom data for the modern samples. Diatom-inferred TP concentrations were high for both ad 1800 (mean 112 μg TP L⁻¹) and the present (mean 122 μg TP L⁻¹), the latter estimates reflecting efforts in recent decades to reduce nutrient loading to Danish lakes following very high levels of nutrient enrichment post-1950. The data presented highlight the impact that human activities 200 years ago, particularly agriculture, had on Danish lake systems. The long cultural history and major anthropogenic disturbance of the Danish landscape mean that true reference conditions for lakes (or ‘baseline’ conditions, those found prior to human impacts) can be found only by considering century to millennial timescales.     

Comparison of the chromotropic acid and modified pararosaniline methods for the determination of formaldehyde in air

Follow-up tests were performed in 25 complaint homes previously investigated by the Wisconsin Division of Health to determine ambient formaldehyde concentrations. Four collection methods were compared in each home: (1) midget impingers containing double-distilled water and immersed in ice baths, (2) midget impingers containing 1% sodium bisulfite solution and immersed in ice baths, (3) midget impingers containing cold 1% sodium bisulfite solution (temperature not maintained with an ice bath), and (4) a refrigerated, complete sampling unit developed at Lawrence Berkley Laboratory which utilized double-distilled water as a collection medium. Air was drawn through the midget impingers using personal sampling pumps. All four types of sampling trains were operated simultaneously in a bedroom, collecting specimens within an area of about 4 ft², while in the kitchen or living room, all sampling trains except for the impingers containing 1% sodium bisulfite solution and immersed in ice baths were operated together. Analysis of variance indicated that the three samples collected using midget impingers and personal sampling pumps gave similar results. All specimens collected in water were analyzed using both the chromotropic acid and pararosaniline analytical methods. Quality control specimens prepared in the laboratory showed excellent agreement between the two methods; however, field specimens through which air had been drawn were assigned lower values using the pararosaniline method. Special precautions were taken to ensure that specimens collected in water were not contaminated with sodium bisulfite, a serious interference for the pararosaniline test. To rule out the possibility that specimens deteriorated between analysis, test results from each method were confirmed by repeating each method for selected sets of specimens for a period of several days. It was hypothesized that some source of interference was present in the field specimens which affected the pararosaniline analysis. Statistical tests were applied to determine whether the observed discrepancy between the analytical methods was consistent and a regression model was employed to determine whether any of the other environmental parameters measured during sample collection was associated with the discrepancy.     

Release,distribution, and impacts of polychlorinated biphenyls (PCB) induced by dredged material disposal activities at a deep-water estuarine site

The aquatic disposal field investigation initiated in Elliott Bay, Puget Sound, WA, in February 1976, was designed to evaluate the ecological effects of open-water disposal of dredged material. The experimental disposal site was located at a depth of 60 m in marine estuary with generally weak circulation. Approximately 114,000 m³ of dredged material contaminated with polychlorinated biphenyls (PCBs) were dumped at the site from split-hull barges. The material presented in this paper is limited to a discussion of PCB impacts. It imcludes (a) a summary of results from the studies conducted between 1976 and 1977 to assess short-term impacts during and after the disposal of PCB contaminated sediments at the Elliott Bay disposal site; (b) a presentation of preliminary results from the continuation studies initiated in February 1979 to determine long-term impacts of the disposal operations. The preliminary data indicate that both dredged-material deposit and the associated PCBs appear to be stable. No major long-term impact on benthic organisms is apparent from this analysis.     

Synthesis of3H- polyethylene and its use for fate studies on degradable plastics

Determining the fate of xenobiotic materials in the environment can be aided by the use of radioactive isotope technology. Previous research on the degradation of polymers such as polyethylene (PE) was aided by the utilization of radiotracers. In order to study the environmental fate of degradable (PE/starch) plastics, we synthesized³H-labeled PE. Results of soil incubation studies indicate that only minimal degradation of the PE component, as indicated by the production of water-soluble metabolites, occurred during 2 years of incubation in soil. Despite the minimal degradation, the³H label did not allow for detection of the degradation products. In addition, the³H-PE was particularly useful for tracing the fate of degradable plastics after consumption by terrestrial isopods. The detection of aqueous-soluble radioactivity in isopod frass was used to indicate degradation of the plastic film.     

Regulatory Oversight of Genetically Engineered Microorganisms: Has Regulation Inhibited Innovation?

/ Using detailed interviews with company representatives and researchers in the field, this paper examines the factors that might account for the slow pace of development of genetically engineered microorganisms (GEMs) intended for environmental release. We specifically analyzed the role of the regulatory system in shaping innovation. We identified at least two cases where industry decided to discontinue the development of a genetically engineered microbial product because of concerns over regulatory oversight. However, most often industry decisions to continue or halt development of GEMs were based on an evaluation of the particular product's efficacy and potential for profitability. Thus the inability of GEMs to perform up to expectations in the field, rather than the regulatory constraints, appears to be the factor responsible for the slow pace of development. KEY WORDS: Genetically engineered microorganisms; Biotechnology; Regulation of biotechnology; Innovation; Environmental release