Biogeochemical Control of the Coupled CO2–O2 System of the Baltic Sea: A Review of the Results of Baltic-C

Past, present, and possible future changes in the Baltic Sea acid–base and oxygen balances were studied using different numerical experiments and a catchment–sea model system in several scenarios including business as usual, medium scenario, and the Baltic Sea Action Plan. New CO₂ partial pressure data provided guidance for improving the marine biogeochemical model. Continuous CO₂ and nutrient measurements with high temporal resolution helped disentangle the biogeochemical processes. These data and modeling indicate that traditional understandings of the nutrient availability–organic matter production relationship do not necessarily apply to the Baltic Sea. Modeling indicates that increased nutrient loads will not inhibit future Baltic Sea acidification; instead, increased mineralization and biological production will amplify the seasonal surface pH cycle. The direction and magnitude of future pH changes are mainly controlled by atmospheric CO₂ concentration. Apart from decreasing pH, we project a decreasing calcium carbonate saturation state and increasing hypoxic area.     

Water quality guidelines for chemicals: learning lessons to deliver meaningful environmental metrics

Many jurisdictions around the globe have well-developed regulatory frameworks for the derivation and implementation of water quality guidelines (WQGs) or their equivalent (e.g. environmental quality standards, criteria, objectives or limits). However, a great many more still do not have such frameworks and are looking to introduce practical methods to manage chemical exposures in aquatic ecosystems. There is a potential opportunity for learning and sharing of data and information between experts from different jurisdictions in order to deliver efficient and effective methods to manage potential aquatic risks, including the considerable reduction in the need for aquatic toxicity testing and the rapid identification of common challenges. This paper reports the outputs of an international workshop with representatives from 14 countries held in Hong Kong in December 2011. The aim of the workshop and this paper was to identify ‘good practice’ in the development of WQGs to deliver to a range of environmental management goals. However, it is important to broaden this consideration to cover often overlooked facets of implementable WQGs, such as demonstrable field validation (i.e. does the WQG protect what it is supposed to?), fit for purpose of monitoring frameworks (often an on-going cost) and finally how are these monitoring data used to support management decisions in a manner that is transparent and understandable to stakeholders. It is clear that regulators and the regulated community have numerous pressures and constraints on their resources. Therefore, the final section of this paper addresses potential areas of collaboration and harmonisation. Such approaches could deliver a consistent foundation from which to assess potential chemical aquatic risks, including, for example, the adoption of bioavailability-based approaches for metals, whilst reducing administrative and technical burdens in jurisdictions.     

Neutralisation of an acidic pit lake by alkaline waste products

A former open pit where black shale (alum shale) was excavated during 1942–1965 has been water filled since 1966. The water chemistry was dominated by calcium and sulphate and had a pH of 3.2–3.4 until 1997–1998, when pH was gradually increasing. This was due to the intrusion of leachates from alkaline cement waste deposited close to the lake. A stable pH of around 7.5 was obtained after 6–7 years. The chemistry of the pit lake has changed due to the neutralisation. Concentrations of some dissolved metals, notably zinc and nickel, have gone down, as a result of adsorption/co-precipitation on solid phases (most likely iron and aluminium hydroxides), while other metals, notably uranium and molybdenum, are present at elevated levels. Uranium concentration is reaching a minimum of around pH 6.5 and is increasing at higher pH, which may indicate a formation of neutral and anionic uranyl carbonate species at high pH (and total carbonate levels around 1 mM). Weathering of the water-exposed shale is still in progress.     

Use of a column leaching test to study the mobility of chlorinated HOCs from a contaminated soil and the distribution of compounds between soluble and colloid phases

An equilibrium and recirculation column test for hydrophobic organic chemicals (ER-H test) was used to study the leaching behaviour of chlorophenols (CPs), polychlorinated diphenyl ethers (PCDEs), polychlorinated dibenzofurans (PCDFs) and polychlorinated dibenzo-p-dioxins (PCDDs) from contaminated soil. A 50% increase in the pore water velocity was shown to have little or no effect on the mobility of CPs, PCDEs, PCDFs and PCDDs. The standard deviations of truly dissolved compounds, CPs, were between 19% and 65% between the tests. However, the repeatability of the ER-H test decreased with increases in the hydrophobicity of the studied compounds; the standard deviations for PCDEs, PCDFs and PCDDs ranged from 53% to 110%, 57% to 77% and 110% to 130%, respectively. The influence of colloids on the release of these compounds was also examined. Up to 30% of the CPs in the soil were leached, of which 1-3% were associated with colloids. The PCDEs, PCDFs and PCDDs were found to be preferably associated with the particulate fraction of the leachate, and less than 0.2% of these compounds were mobilised.     

Polycyclic aromatic hydrocarbons in ash: determination of total and leachable concentrations

Before wood ash can be used as a soil fertilizer, concentrations of environmentally hazardous compounds must be investigated. In this study, total and leachable concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in four ash samples and one green liquor sludge. The ash sample with the highest carbon content also contained high levels of PAHs; three of the ash samples had total concentrations exceeding the limit permitted by the Swedish Forest Agency for recycling to forest soils. The leachable concentrations were higher for the non-stabilized samples; this was probably due to colloid-facilitated transport of the contaminants in these samples. However, the leachable concentrations were overall relatively low in all the samples studied. The amounts of PAHs introduced to forest soils by additions of stabilized, recyclable ash products will be determined primarily by the rate of weathering of the ash particles and the total concentration of contaminants.     

Environmental risks of farmed and barren alkaline coal ash landfills in Tuzla, Bosnia and Herzegovina

The disposal of coal combustion residues (CCR) has led to a significant consumption of land in the West Balkan region. In Tuzla (Bosnia and Herzegovina) we studied previously soil-covered (farmed) and barren CCR landfills including management practises, field ageing of CCR and the transfer of trace elements into crops, wild plants and wastewaters. Soil tillage resulted in mixing of cover soil with CCR. Medicago sativa showed very low Cu:Mo ratios (1.25) which may cause hypocuprosis in ruminants. Total loads of inorganic pollutants in the CCR transport water, but not pH ( approximately 12), were below regulatory limits of most EU countries. Arsenic concentrations in CCR transport water were <2microgl(-1) whereas reductive conditions in an abandoned landfill significantly enhanced concentrations in leachates (44microgl(-1)). The opposite pattern was found for Cr likely due to large initial leaching of CrVI. Public use of landfills, including farming, should be based on a prior risk assessment due to the heterogeneity of CCR.     

Contamination Levels and Preliminary Assessment of the Technical Feasibility of Employing Natural Attenuation in 5 Priority Areas of Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil

Five priority areas of potential impact by contaminants (API) were investigated at the Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil with the following aims: (i) to identify both organic and inorganic contaminants present in soil and groundwater; (ii) to define the environmental conditions relevant for microbial activity at the site and (iii) to evaluate the feasibility of employing natural attenuation for treatment of the hydrocarbon contamination. One area (API 1) was an uncontrolled landfill, where waste materials from the refinery were deposited between 1954 and 1986, and four areas (API 4, 5, 7 and 11) were located in the operational section of the refinery. Soil contamination by regulated BTEX compounds (benzene, toluene, total xylenes) was restricted to two samples from API 1. Nonregulated ethylbenzene was detected in one soil sample from API 4, one from API 5 and two from API 1. No soil contained regulated PAH above threshold levels. Several nonregulated PAHs were found in 6 soil samples from API 1, 3 soil samples from API 4 and 1 soil sample from API 5. Site soils contained very high aluminium concentrations, but metal contamination was restricted to one soil sample from API 1, which contained nickel above threshold limits. BTEX contamination of groundwater was due mostly to benzene. Of the 17 PAH molecules tested, only naphthalene and 2-methylnaphthalene occurred in groundwater. The sum of total BTEX and total PAH exceeded 200 μg/L in only a few monitoring wells in API 4, 5 and 11 and was always below 2.640 μg/L. Be, Cd, Cr, Cu, Hg, Ni, Se, Ag, Tl and Zn were not detected in groundwater, which was contaminated in a few locations by aluminium (mostly below 1 mg/L), lead (<0.066 mg/L) and arsenic (<0.056 mg/L). S, K, Ca, Mg and Fe were present in groundwater in excess of physiological requirements for microbial growth, but low concentrations of N and P could become growth limiting. However, BTEX were efficiently degraded in saturated and unsaturated zone microcosms and nutrient amendments did not stimulate biodegradation rates measurably. The inorganic carbon pool in groundwater was up to one order of magnitude larger than the organic carbon pool. Total inorganic carbon (TIC) in API groundwater exceeded TIC of clean groundwater by factors of 2 (API 4), 6 (API 5, 7 and 11) or 10 (API 1). Most of the inorganic carbon incorporated into groundwater beneath the refinery originated from biodegradation in the unsaturated soil, which contained a microbiota (10⁶ cells/g on average) capable of growth with most of the pure (benzene, toluene, ethylbenzene and xylene) and mixed hydrocarbons tested (diesel oil, gasoline, naphtha, condensate, aromatic residue and fuel oil). A viscous hydrocarbon paste uncovered in API 1 was insoluble in water but dissolved in dichloromethane. Many organic components of this paste were biodegradable as evidenced by weight reduction of the hydrocarbon paste and by the growth of suspended and attached biomass in saturated zone microcosms, where the paste was the only carbon source. This study indicates that monitored natural attenuation may be a technically feasible and efficient means for plume control in API 1, 4 and 5, provided the plumes in API 4 and 5 are not expanding. This technique is not suitable for contaminant reduction in API 11.     

Integrated assessment modeling of global climate change: Transparent rational tool for policy making or opaque screen hiding value‐laden assumptions?

One of the principal tools used in the integrated assessment (IA) of environmental science, technology and policy problems is integrated assessment models (IAMs). These models are often comprised of many sub‐models adopted from a wide range of disciplines. A multi‐disciplinary tool kit is presented, from which three decades of IA of global climatic change issues have tapped. A distinction between multi‐ and inter‐disciplinarity is suggested, hinging on the synergistic value added for the latter. Then, a hierarchy of five generations of IAMs are proposed, roughly paralleling the development of IAMs as they incorporated more components of the coupled physical, biological and social scientific disciplines needed to address a “real world” problem like climatic change impacts and policy responses. The need for validation protocols and exploration of predictability limits is also emphasized. The critical importance of making value‐laden assumptions highly transparent in both natural and social scientific components of IAMs is stressed, and it is suggested that incorporating decision‐makers and other citizens into the early design of IAMs can help with this process. The latter could also help IA modelers to offer a large range of value‐containing options via menu driven designs. Examples of specific topics which are often not well understood by potential users of IAMs are briefly surveyed, and it is argued that if the assumptions and values embedded in such topics are not made explicit to users, then IAMs, rather than helping to provide us with refined insights, could well hide value‐laden assumptions or conditions. In particular, issues of induced technological change, timing of carbon abatement, transients, surprises, adaptation, subjective probability assessment and the use of contemporary spatial variations as a substitute for time evolving changes (what I label “ergodic economics”) are given as examples of problematic issues that IA modelers need to explicitly address and make transparent if IAMs are to enlighten more than they conceal. A checklist of six practices which might help to increase transparency of IAMs is offered in the conclusions. Incorporation of decision‐makers into all stages of development and use of IAMs is re‐emphasized as one safeguard against misunderstanding or misrepresentation of IAM results by lay audiences.     

Glutathione status and glutathione reductase activity in spruce needles of healthy and damaged trees at two mountain sites

Levels of glutathione, in both reduced and oxidized form, and glutathione reductase activity were monitored in needles of healthy and damaged spruce trees (Picea abies (L.) Karst.) during the course of four vegetation periods at two natural sites. The glutathione content and glutathione reductase activity showed a pronounced annual rhythm in undamaged trees, whereas damaged spruce trees deviated significantly from this course. In comparison with undamaged trees, damaged trees showed markedly increased levels of glutathione during the test period of 1989-1991. However, glutathione reductase activity differed in damaged and undamaged trees, only in 1989-1990. The ratio of reduced to oxidized glutathione (GSH/GSSG ratio) was slightly higher in damaged trees, and the highest levels were found during the winter months. In the case of damaged trees, a correlation between GSH/GSSG ratio and current ozone levels at the sites could be clearly established. The present results indicate that damaged trees suffer from increased oxidative stress, especially in the period from June to October.