Potential toxicity of amphenicol antibiotic: binding of chloramphenicol to human serum albumin

Antibiotics are widely used in daily life but their abuse has posed a potential threat to human health. To evaluate the toxicity of chloramphenicol (CAP) at the protein level, the interaction between CAP and human serum albumin (HSA) was investigated by fluorescence, Ultraviolet–visible (UV–Vis) absorption, Fourier transform infrared (FT-IR) spectroscopy and molecular docking methods. Fluorescence data revealed that the fluorescence quenching of HSA by CAP was the result of the formation of CAP–HSA complex, and the binding constant was determined to be 3.196?×?10⁴ L mol^?1 at 310 K. The thermodynamic determination indicated that the interaction was driven by enthalpy change and entropy change together, where the multiple hydrogen bonds (CAP and the residues Arg 222 and His 242 of HSA) and van der Waals forces were the dominant binding force. The site marker competition revealed that CAP bound into sub-domain IIA of HSA. The binding of CAP induced the drastic reduction in α-helix conformation and the significant enhancement in β-sheet conformation of HSA. Molecular docking study further confirmed the binding mode obtained by experimental study. This work provides a new quantitative evaluation method for antibiotics to cause the protein damage.     

磷酸微波活化多孔生物质炭对亚甲基蓝的吸附特性

以甘蔗渣为原料,采用微波辅助H3PO4活化法制备富含含氧酸官能团的中孔生物质炭。通过扫描电子显微镜SEM、傅立叶变换红外光谱FT-IR等技术对生物质炭物理化学性质进行表征,并通过静态实验法,探讨炭样对亚甲基蓝的吸附行为及热力学性质。结果表明,H3PO4活化制备蔗渣生物质炭的适宜条件为浸渍比1：1,烘干时间10h,活化功率900W,活化时间22min,在此条件下制得的生物质炭得率为39．2％,碘值为817mg／g,亚甲基蓝值为229mg／g,为国家一级品标准的1．7倍。红外光谱分析表明,炭样表面以羟基、羰基、羧基等酸性官能团为主。静态吸附实验表明,Freundlich方程与Redlich—Peterson方程能较好地描述等温吸附行为,表现为优惠吸附。热力学研究表明,吸附吉布斯自由能（△G0）〈0,说明吸附反应是自发过程,而吸附标准焓变（△H0）〉70KJ／mol,表明亚甲基蓝在制备炭样上的吸附是吸热反应,升温有利于吸附,且化学反应在吸附过程中发挥了重要作用。     

Metal uptake capacity of modified Saccharomyces pastorianus biomass from different types of solution

In this paper, we investigate the effect of different biomass pretreatments on metal ion uptake by various biosorbents. Heat-treated as well as caustic-treated and ground biomass of Saccharomyces pastorianus was used to remove copper, lead and cadmium from various solutions. Untreated yeast was used as the control sample. The effect of yeast modification on sorption capacity depended on the different types of heavy metal ions and whether they were in single- or multi-component solutions. The highest uptake of copper and lead from a single-metal solution was obtained from heat-treated cells. Ground biomass was the most efficient at cadmium removal. However, the sorption capacity of the modified biomass did not improve when metal ions were removed from multi-component solutions. Indeed, the results in this paper show that optimizing metal removal from single-cation solutions can lead to decreased sorption capacity in multi-component solutions. Therefore, while adjusting the procedure of biomass modification, not only the nature of the metal ion being sorbed but also the chemical composition of the metal ion solution should be taken into account.     

Medical Waste Treatment and Disposal Methods Used by Hospitals in Oregon,Washington, and Idaho

ABSTRACT

This study investigated medical waste practices used by hospitals in Oregon, Washington, and Idaho, which includes the majority of hospitals in the U.S. Environmental Protection Agency's (EPA) Region 10. During the fall of 1993, 225 hospitals were surveyed with a response rate of 72.5%. The results reported here focus on infectious waste segregation practices, medical waste treatment and disposal practices, and the operating status of hospital incinerators in these three states. Hospitals were provided a definition of medical waste in the survey, but were queried about how they define infectious waste. The results implied that there was no consensus about which agency or organization's definition of infectious waste should be used in their waste management programs. Confusion around the definition of infectious waste may also have contributed to the finding that almost half of the hospitals are not segregating infectious waste from other medical waste. The most frequently used practice of treating and disposing of medical waste was the use of private haulers that transport medical waste to treatment facilities (61.5%). The next most frequently reported techniques were pouring into municipal sewage (46.6%), depositing in landfills (41.6%), and autoclaving (32.3%). Other methods adopted by hospitals included Electro-Thermal-Deac-tivation (ETD), hydropulping, microwaving, and grinding before pouring into the municipal sewer. Hospitals were asked to identify all methods they used in the treatment and disposal of medical waste. Percentages, therefore, add up to greater than 100% because the majority chose more than one method. Hospitals in Oregon and Washington used microwaving and ETD methods to treat medical waste, while those in Idaho did not. No hospitals in any of the states reported using irradiation as a treatment technique. Most hospitals in Oregon and Washington no longer operate their incinerators due to more stringent regulations regarding air pollution emissions. Hospitals in Idaho, however, were still operating incinerators in the absence of state regulations specific to these types of facilities.     

Adsorption of As(III) on chitosan-Fe-crosslinked complex (Ch-Fe)

It was reported the adsorption of As(III) on the surface of the chitosan-Fe-crosslinked complex. Theoretical correlation of the experimental equilibrium adsorption data for As(III)/Ch-Fe system is best explained by the non-linearized form Langmuir-Freundlich isotherm model. At optimum conditions, pH 9.0, the maximum adsorption capacity, calculated using the Langmuir-Freundlich isotherm model was 13.4 mg g⁻¹. The adsorption kinetics of As(III) onto Ch-Fe are described by the pseudo-first-order kinetic equation. The results of the Mössbauer spectroscopy showed that there is no redox process on the surface of the adsorbent.     

Chlorpyrifos residues levels in fruits and vegetables after field treatment

Chlorpyrifos (O,O-diethyl O-3,5,6-trichloro-2-pyridyl phosphorothioate) was applied with three different formulations on oranges, peaches, tomatoes, wine and table grapes, and its behaviour was evaluated after field treatment. The formulations applied were emulsifiable concentrates (EC), microencapsulates (ME), and wettable granules (WG). The residues were similar in all crops studied in the EC and WG experiments, except peaches with WG treatment, the residue amount was lower than EC values. Tomatoes which were grown in greenhouse showed similar residues in all treatments just after treatment. Wine and table grapes showed different decline curves in the EC experiments ascribable to the different growing technology. Instrumental limit of determination (LOD) and limit of quantification (LOQ) for all matrices were 0.01, and 0.03 mg kg?1, respectively. Repeated treatments showed that Chlorpyrifos can accumulate leading to residue levels at the preharvest interval (PHI) over the maximum residue level (MRL), especially on oranges and peaches. Among the formulates used ME showed the higher risk of residues over the MRL at harvest.     

Assessment of heavy metal pollution from a Fe-smelting plant in urban river sediments using environmental magnetic and geochemical methods

Environmental magnetic proxies provide a rapid means of assessing the degree of industrial heavy metal pollution in soils and sediments. To test the efficiency of magnetic methods for detecting contaminates from a Fe-smelting plant in Loudi City, Hunan Province (China) we investigated river sediments from Lianshui River. Both magnetic and non-magnetic (microscopic, chemical and statistical) methods were used to characterize these sediments. Anthropogenic heavy metals coexist with coarse-grained magnetic spherules. It can be demonstrated that the Pollution Load Index of industrial heavy metals (Fe, V, Cr, Mo, Zn, Pb, Cd, Cu) and the logarithm of saturation isothermal remanent magnetization, a proxy for magnetic concentration, are significantly correlated. The distribution heavy metal pollution in the Lianshui River is controlled by surface water transport and deposition. Our findings demonstrate that magnetic methods have a useful and practical application for detecting and mapping pollution in and around modern industrial cities.     

Temporal variations of atmospheric aerosol in four European urban areas

Purpose

The concentrations of PM₁₀ mass, PM_2.5 mass and particle number were continuously measured for 18 months in urban background locations across Europe to determine the spatial and temporal variability of particulate matter.

Methods

Daily PM₁₀ and PM_2.5 samples were continuously collected from October 2002 to April 2004 in background areas in Helsinki, Athens, Amsterdam and Birmingham. Particle mass was determined using analytical microbalances with precision of 1 ??g. Pre- and post-reflectance measurements were taken using smoke-stain reflectometers. One-minute measurements of particle number were obtained using condensation particle counters.

Results

The 18-month mean PM₁₀ and PM_2.5 mass concentrations ranged from 15.4 ??g/m³ in Helsinki to 56.7 ??g/m³ in Athens and from 9.0 ??g/m³ in Helsinki to 25.0 ??g/m³ in Athens, respectively. Particle number concentrations ranged from 10,091 part/cm³ in Helsinki to 24,180 part/cm³ in Athens with highest levels being measured in winter. Fine particles accounted for more than 60% of PM₁₀ with the exception of Athens where PM_2.5 comprised 43% of PM₁₀. Higher PM mass and number concentrations were measured in winter as compared to summer in all urban areas at a significance level p?Conclusions Significant quantitative and qualitative differences for particle mass across the four urban areas in Europe were observed. These were due to strong local and regional characteristics of particulate pollution sources which contribute to the heterogeneity of health responses. In addition, these findings also bear on the ability of different countries to comply with existing directives and the effectiveness of mitigation policies.     

Interactions between accumulation of trace elements and macronutrients in Salix caprea after inoculation with rhizosphere microorganisms

Although the beneficial effects on growth and trace element accumulation in Salix spp. inoculated with microbes are well known, little information is available on the interactions among trace elements and macronutrients. The main purpose of this study was to assess the effect of phytoaugmentation with the rhizobacteria Agromyces sp., Streptomyces sp., and the combination of each of them with the fungus Cadophora finlandica on biomass production and the accumulation of selected trace elements (Zn, Cd, Fe) and macronutrients (Ca, K, P and Mg) in Salix caprea grown on a moderately polluted soil. Dry matter production was significantly enhanced only upon inoculation with Agromyces sp. Regarding the phytoextraction of Cd and Zn, shoot concentrations were mostly increased after inoculation with Streptomyces sp. and Agromyces sp. + C. finlandica. These two treatments also showed higher translocation factors from roots to the leaves for both Cd and Zn. The accumulation of Cd and Zn in shoots was related to increased concentrations of K. This suggests that microorganisms that contribute to enhanced phytoextraction of Cd and Zn affect also the solubility and thus phytoavailability of K. This study suggests that the phytoextraction of Zn and Cd can be improved by inoculation with selected microbial strains.