Natural attenuation of diesel aliphatic hydrocarbons in contaminated agricultural soil

A diesel fuel spill at a concentration of 1 L m(-2) soil was simulated on a 12 m(2) plot of agricultural land, and natural attenuation of aliphatic hydrocarbons was monitored over a period of 400 days following the spill after which the aliphatic hydrocarbon concentrations were found to be below the legal contamination threshold for soil. The main fraction of these compounds (95%) remained at the surface layer (0-10 cm). Shortly after the spill (viz. between days 0 and 18), evaporation was the main origin of the dramatic decrease in pollutant concentrations in the soil. Thereafter, soil microorganisms used aliphatic hydrocarbons as sources of carbon and energy, as confirmed by the degradation ratios found. Soil quality indicators, soil microbial biomass and dehydrogenase activity, regained their original levels about 200 days after the spill.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

The trace element content of top-soil and wild edible mushroom samples collected in Tuscany, Italy

The amount of the trace elements As, Ba, Cd, Cr, Cu, Hg, Li, Mn, Ni, Pb, Rb, Se, Sr, and Zn was measured in top soils and edible mushrooms, Boletus edulis, Macrolepiota procera, collected at five distinct green microhabitats inside the Lucca province, North-Central Italy (years 2008–2009). Results showed a top soil element content within the Italian statutory limits. Concerning the amount of mushroom elements, we observed significant species-differences obtaining higher levels of Ni, Rb, and Se in B. edulis or As, Pb, Cu in M. procera. Bioaccumulation factors (BCFs: element in mushroom/element in soil) resulted species-dependent and element-selective: in particular, B. edulis preferentially accumulated Se (BCFs varying from 14 to 153), while M. procera mainly concentrated Cu (BCFs varying from 5 to 15). As well, both species displayed between-site BCF differences. By a multivariate principal component approach, cluster analysis (CA), we could resolve two main clusters of soil element composition, corresponding to the most ecologically divergent sites. Besides, CA showed no cluster relating to element contents of B. edulis at the different collection sites, while a separation in groups was found for M. procera composition with respect to harvesting locations, suggesting uptake systems, in this saprotrophic species, sensitive to microhabitat. Regarding consumer safety, Cd, Hg, Pb levels resulted sometime relevant in present samples, never reaching values from current literature on mushrooms collected in urban-polluted areas. Our findings encourage a deeper assessment of the molecular mechanisms of metal intake by edible mushrooms, encompassing genetic biochemical and geo-ecological variables, with particular awareness to element bioavailability in soils and fungi.     

Sources of potentially toxic elements and organic pollutants in an urban area subjected to an industrial impact

Urban and industrial development has caused a major impact on environmental soil quality. This work assesses the extent and severity of contamination in a small urban area subjected to an industrial impact and identifies the major anthropogenic inputs. Twenty-six soil samples were collected from agricultural and urban sites, and concentrations of potentially toxic elements (As, Cd, Cu, Cr, Fe, Mn, Ni, Pb and Zn), PAHs and PCBs, were determined. In spite of the low median concentrations observed, some sites represent a potential hazard for human health and ecosystems. Concentrations of contaminants were higher than those found in a nearby city, indicating that the study area is affected by the surrounding industry. The use of multivariate statistical analyses allowed for the identification of the main factors controlling the variability of potentially toxic elements and organic pollutants in the soils. The presence of Cr, Fe, Mn and Ni was associated with geogenic inputs, and Cu, Pb, Zn, As, PAHs and PCBs were associated with anthropogenic inputs. Industry and traffic were the most important anthropogenic sources. Soil characteristics were identified as important factors controlling the spatial variability of elements, both from recognised natural and anthropogenic origin. Differences between land uses were observed, which may be attributed to both management practices and proximity to sources.     

Particle emission from heavy-duty engine fuelled with blended diesel and biodiesel

In this study, particulate matter (PM) were characterized from a place impacted by heavy-duty vehicles (Bus Station) fuelled with diesel/biodiesel fuel blend (B3) in the city of Londrina, Brazil. Sixteen priority polycyclic aromatic hydrocarbons (PAH) concentrations were analyzed in the samples by their association with atmospheric PM, mass size distributions and major ions (fluorite, chloride, bromide, nitrate, phosphate, sulfate, nitrite, oxalate; fumarate, formate, succinate and acetate; lithium, sodium, potassium, magnesium, calcium and ammonium). Results indicate that major ions represented 21.2% particulate matter mass. Nitrate, sulfate, and ammonium, respectively, presented the highest concentration levels, indicating that biodiesel may also be a significant source for these ions, especially nitrate. Dibenzo[a,h]anthracene and indeno[1,2,3,-cd]pyrene were the main PAH found, and a higher fraction of PAH particles was found in diameters lower than 0.25 μm in Londrina bus station. The fine and ultrafine particles were dominant among the PM evaluated, suggesting that biodiesel decreases the total PAH emission. However, it does also increase the fraction of fine and ultrafine particles when compared to diesel.     

A review on human attitudes towards reptiles in Brazil

For many millennia humans and reptiles have interacted, but the attitude of humans towards these animals has depended on culture, environment, and personal experience. At least 719 reptile species are known to occur in Brazil and about 11% of this fauna has been exploited for many different purposes, including bushmeat, leather, ornamental and magic/religious uses, and as folk medicines. Brazil can therefore serve as an interesting case study for better understanding reptile use by human societies, and the present paper catalogues some of the reptile species being used in Brazil and discusses implications for their conservation. A literature review indicated that 81 reptile species are culturally important in this country, with 47 (58%) species having multiple uses, 54 being used for medicinal purposes, 38 as food, 28 for ornamental or decorative purposes, 20 used in magic/religious practices, 18 as pets, and 40 are commonly killed when they come into contact with humans. Regarding their conservation status, 30 (37.5%) are included on State's Red List, Brazilian Red List or the IUCN Red List. There are many forms of interaction between reptiles and humans in Brazil-although most of them are quite negative in terms of wildlife conservation-which reinforces the importance of understanding such uses and interactions in the context of protecting reptiles in Brazil. A better understanding of the cultural, social, and traditional roles of these reptiles is fundamental to establishing management plans for their sustainable use.     

Hg transfer from contaminated soils to plants and animals

Understanding the transfer of mercury (Hg) from soil to crops is crucial due to Hg toxicity and Hg occurrence in terrestrial systems. Previous research has shown that available Hg in soils contributes to plant Hg levels. Plant Hg concentrations are related to soil conditions and plant characteristics. Mechanistic models describing such soil–plant interactions are however difficult to quantify. Here we performed a field study in agricultural, mining and industrial areas in Portugal to evaluate potential food chain risks. The uptake of Hg by Italian ryegrass, ryegrass, orchard grass, collard greens and rye was measured to calculate daily intakes (DI) of Hg for cows and sheep grazing. A total of 136 soil samples and 129 plant samples were analysed. Results show that total Hg concentrations ranged from 0.01 to 98 mg kg⁻¹ in soils; 0.01–5.4 mg kg⁻¹ in shoots and 0.01–42 mg kg⁻¹ in roots. Calculated DI ranged from 0.18 to 132 mg d⁻¹ for cows, and from 0.028 to 23 mg d⁻¹ for sheep. In 27 grassland sites, daily intakes exceeded the acceptable daily intake of both cows and sheep in view of food safety considering Hg in animal kidneys evidencing potential risks to human health. The transfer of Hg from soil to crops was described using empirical Freundlich-type functions. For ryegrass, orchard grass and collard greens, the soil-to-root or soil-to-shoot transfer of Hg appeared to be controlled by the total soil Hg concentration and levels of Al_ox and Fe_ox. Empirical functions allowed us to obtain realistic estimates of Hg levels in crops and can be used as an alternative to mechanistic models when evaluating food chain risks of Hg contamination in agricultural soils.     

Increasing heterogeneity of sensitive assemblages as a consequence of human impact in submarine caves

Submarine caves are considered as a top priority for conservation, but the effects of common pressures are poorly known for these habitats. Here, we examined the effect of recreational human visitation on a selection of submarine caves in a Mediterranean Marine Protected Area (40°35′40″N; 8°11′39″E) where diving activities are regulated. Sampling was conducted in visited and not visited caves to assess whether diving activities have a significant effect on cave habitats, what are the components of biodiversity most affected by this disturbance, and its potential effects on spatial heterogeneity of benthic assemblages. Results clearly showed that human visitation could significantly affect spatial patterns of benthic assemblages. Organisms with erect growth forms were significantly more abundant and homogeneously distributed where diving activities are forbidden. An increase in the small-scale heterogeneity of assemblages and a decrease in their three-dimensional structure could be the ultimate consequences of human visitation. The interaction between specific stressors and the patterns of distribution of species and assemblages can drive their spatial heterogeneity also in unique habitats like marine caves, representing an early warning for the development of appropriate management measures.     

Preparation of CuO/SiO<Subscript>2</Subscript> and photocatalytic activity by degradation of methylene blue

A photocatalyst based on CuO/SiO₂ was prepared, and evaluated for the degradation of methylene blue in aqueous medium. The photocatalyst was obtained by calcination method of copper salt, in the presence of silica. The characterization by XRD, FTIR, and TPR techniques confirmed the formation of CuO as active phase. SEM studies showed CuO deposited on the surface of SiO₂. By ESI-MS, it was demonstrated that the degradation of methylene blue occurs through successive hydroxylations. Photodegradation assays showed that CuO/SiO₂ was efficient for degradation, and that the material worked better in the presence of UV light.     

The influence of anthropogenic and natural geochemical factors on urban soil quality variability: a comparison between Glasgow, UK and Aveiro, Portugal

As part of a harmonised assessment of urban soils (), we investigated the variability of metal content in soils from Aveiro (Portugal) and Glasgow (UK). Samples were collected from parks and other public open spaces in each city. Metal content (Al, Ca, Cr, Cu, Fe, Mn, Ni, Pb and Zn) and basic soil parameters (texture, CEC, pH, organic matter) were determined and data investigated using principal component analysis (PCA). The two cities differ in absolute levels of metal content reflecting industrial and historical development. Factors identified by PCA included anthropogenic (Cu, Pb, Zn), soil properties and geology, which explain variability when data were assessed based on metal content, soil properties and land use. This study highlights the contribution from geological background even in strongly urbanised environments.