Spatial distribution of aerosol black carbon over India during pre-monsoon season

Aerosol black carbon (BC) mass concentrations ([BC]), measured continuously during a mutli-platform field experiment, Integrated Campaign for Aerosols gases and Radiation Budget (ICARB, March–May 2006), from a network of eight observatories spread over geographically distinct environments of India, (which included five mainland stations, one highland station, and two island stations (one each in Arabian Sea and Bay of Bengal)) are examined for their spatio-temporal characteristics. During the period of study, [BC] showed large variations across the country, with values ranging from 27 μg m^?3 over industrial/urban locations to as low as 0.065 μg m^?3 over the Arabian Sea. For all mainland stations, [BC] remained high compared to highland as well as island stations. Among the island stations, Port Blair (PBR) had higher concentration of BC, compared to Minicoy (MCY), implying more absorbing nature of Bay of Bengal aerosols than Arabian Sea. The highland station Nainital (NTL), in the central Himalayas, showed low values of [BC], comparable or even lower than that of the island station PBR, indicating the prevalence of cleaner environment over there. An examination of the changes in the mean temporal features, as the season advances from winter (December–February) to pre-monsoon (March–May), revealed that: (a) Diurnal variations were pronounced over all the mainland stations, with an afternoon low and a nighttime high; (b) At the islands, the diurnal variations, though resembled those over the mainlands, were less pronounced; and (c) In contrast to this, highland station showed an opposite pattern with an afternoon high and a late night or early morning low. The diurnal variations at all stations are mainly caused by the dynamics of local Atmospheric Boundary Layer (ABL). At the entire mainland as well as island stations (except HYD and DEL), [BC] showed a decreasing trend from January to May. This is attributed to the increased convective mixing and to the resulting enhanced vertical dispersal of species in the ABL. In addition, large short-period modulations were observed at DEL and HYD, which appeared to be episodic. An examination of this in the light of the MODIS-derived fire count data over India along with the back-trajectory analysis revealed that advection of BC from extensive forest fires and biomass-burning regions upwind were largely responsible for this episodic enhancement in BC at HYD and DEL.     

Assessing links between crop diversity and food self-sufficiency in three agroecological regions of Nepal

Increasing on-farm crop diversity is one agroecological approach to enhancing food self-sufficiency that helps small-scale farmers keep their food systems stable by reducing risks associated with stressors, such as a pest outbreaks or droughts. But understanding how crop diversity and food self-sufficiency are related is unknown. To explore this complex relation, this study presents household data (n = 1664) from Nepal to test the hypothesis that families with high crop diversity enjoy greater household food self-sufficiency. Data are presented for three districts that are representative of three distinct agroecological regions of the country: (1) Sarlahi, which is affluent, market-oriented, and on the plains; (2) Makwanpur District in the hills, which has well-developed integrated farm production; and (3) the mountainous District of Humla, which has the poorest quality environment and is the most remote. Results show that in the Humla District, families with greater crop diversity were more self-sufficient. In contrast, farmers in Makwanpur, who have already established a high degree of crop diversity based on vegetable production, do not benefit from additional crop diversity in terms of their ability to provide for themselves. Finally, data from Sarlahi show that families’ food self-sufficiency benefits from crop diversification. We conclude that boosting crop diversity is a viable strategy for maintaining stability in food systems, but this varies depending on the accessibility of a farm and, in particular, access to markets.     

Association between environmental exposure to p,p′-DDE and lindane and semen quality

Scientific concern exists about the toxic effect of dichlorodiphenyldichloroethylene (p, p′-DDE) and lindane on male infertility, and the mechanism underlying male reproductive toxicity of this pesticide remains unanswered. We investigated not only the possible association between the chlorinated pesticide levels and semen quality in nonoccupationally exposed men, but also the probable mode of action using mitochondrial membrane potential (MMP), reactive oxygen species (ROS), lipid peroxidation (LPO), and sperm chromatin structure assay (SCSA). A study in 278 men (21–40 years old) who visited Obstetrics and Gynecology Department, KGMU, Lucknow, for semen analysis was conducted. We performed semen analysis according to the WHO guidelines, while p, p′-DDE and lindane analysis was done by the GLC and LPO by the spectrophotometer, and the sperm mitochondrial status, ROS, and SCSA with the flow cytometer. The questionnaire data showed no significant difference in the demographic characteristics between the two groups, i.e., trying to conceive >1 year and proven fertility. However, a significant difference in the concentration of p, p′-DDE and lindane was observed between the groups. When the subjects were divided among four categories by quartile of exposure, the subjects in the highest quartile showed low sperm motility as compared to the subjects in the lowest quartile. Pearson’s correlation showed a significant negative correlation between semen p, p′-DDE, lindane level, and sperm quality and positive association with the number of cells with depolarized mitochondria, elevation in ROS production and LPO, and DNA fragmentation index (DFI). The findings are suggestive that these toxicants might cause a decline in semen quality, and these effects might be ROS, LPO, and mitochondrial dysfunction mediated.     

Degradation of atrazine by an acclimatized soil fungal isolate

A fungal strain able to use atrazine (2-chloro-4-ethylamino-5-isopropylamino-1,3,5-triazine) as a source of nitrogen was isolated from a corn field soil that has been previously treated with the herbicide. This strain was purified and acclimatized to atrazine at a higher level in the laboratory. A supplemented N was required to trigger the reaction. Atrazine was degraded at a faster rate in inoculated mineral salt medium (MSM) than non-inoculated MSM. Within 20 days, nearly 34% of the atrazine was degraded in inoculated medium while only 2% of the herbicide was degraded in non-inoculated medium. Degradation of atrazine by the isolated fungal strain was also studied in sterile and non-sterile soil to determine the compatibility of the isolated strain with native microorganisms in soil. The degradation of atrazine was found to be more in inoculated sterile soil than in inoculated non-sterile soil. Cell free extract (CFE) of fungal mycelium degraded about 50% of the atrazine in buffer in 96 hours compared to the control. Four atrazine metabolites were isolated and characterized by LCMS. On the basis of morphological parameters the isolate was identified as Penicillium species. Results indicated that the microorganism may be useful for remediation of atrazine-contaminated soil.     

Application of gas diffusion biocathode in microbial electrosynthesis from carbon dioxide

Microbial catalysis of carbon dioxide (CO₂) reduction to multi-carbon compounds at the cathode is a highly attractive application of microbial electrosynthesis (MES). The microbes reduce CO₂ by either taking the electrons or reducing the equivalents produced at the cathode. While using gaseous CO₂ as the carbon source, the biological reduction process depends on the dissolution and mass transfer of CO₂ in the electrolyte. In order to deal with this issue, a gas diffusion electrode (GDE) was investigated by feeding CO₂ through the GDE into the MES reactor for its reduction at the biocathode. A combination of the catalyst layer (porous activated carbon and Teflon binder) and the hydrophobic gas diffusion layer (GDL) creates a three-phase interface at the electrode. So, CO₂ and reducing equivalents will be available to the biocatalyst on the cathode surface. An enriched inoculum consisting of acetogenic bacteria, prepared from an anaerobic sludge, was used as a biocatalyst. The cathode potential was maintained at ?1.1 V vs Ag/AgCl to facilitate direct and/or hydrogen-mediated CO₂ reduction. Bioelectrochemical CO₂ reduction mainly produced acetate but also extended the products to ethanol and butyrate. Average acetate production rates of 32 and 61 mg/L/day, respectively, with 20 and 80 % CO₂ gas mixture feed were achieved with 10 cm² of GDE. The maximum acetate production rate remained 238 mg/L/day for 20 % CO₂ gas mixture. In conclusion, a gas diffusion biocathode supported bioelectrochemical CO₂ reduction with enhanced mass transfer rate at continuous supply of gaseous CO₂.

Open image in new window

Graphical abstract ?

     

A semi-automated tool for identifying agricultural roadway crashes in crash narratives

Objective: Crash reports contain precoded structured data fields and a crash narrative that can be a source of rich information not included in the structured data. The narrative can be useful for identifying vulnerable roadway users, such as agricultural workers. However, using the narratives often requires manual reviews that are time consuming and costly. The objective of this research was to develop a simple and relatively inexpensive, semi-automated tool for screening crash narratives and expediting the process of identifying crashes with specific characteristics, such as agricultural crashes.

Methods: Crash records for Louisiana from 2010 to 2015 were obtained from the Louisiana Department of Transportation (LaDOTD). Records with narratives were extracted and stratified by vehicle type. The majority of analyses focused on a vehicle type of farm equipment (Type T). Two keyword lists, an inclusion list and an exclusion list, were created based on the published literature, subject-matter experts, and findings from a pilot project. Next, a semi-automated tool was developed in Microsoft Excel to identify agricultural crashes. Lastly, the tool’s performance was assessed using a gold standard set of agricultural narratives identified through manual review.

Results: The tool reduced the search space (e.g., number of narratives that need manual review) for narratives requiring manual review from 6.7 to 59.4% depending on the research question. Sensitivity was high, with 96.1% of agricultural crash narratives being correctly classified. Of the gold standard agricultural narratives, 58.3% included an equipment keyword and 72.8% included a farm equipment brand.

Conclusion: This article provides information on how crash narratives can supplement structured crash data. It also provides an easy-to-implement method to facilitate incorporating narratives into safety research along with keyword lists for identifying agricultural crashes.     

Seasonal phytoplanktonic diversity of Kitham lake, Agra

Two years (Jan. 2000 - Dec. 2001) data on the seasonal studies of phytoplanktonic diversity of Kitham lake (Sur Sarovar) Agra revealed the presence of 73 algal species. A limited number of these were recorded throughout the year, while others were distributed in different seasons mainly in winter and summer seasons. During winters, Chlorophyceae was the most dominant group followed by Bacillariophyceae. On the other hand, Cyanophyceae and Euglenophyceae were the most dominant during summers. Certain species e.g. Pandorina morum, Pediastrum tetras, Gonium sp., Chlorella vulgaris, Scendesmus quadricauda, Oedogonium cardiocum, Synedra ulna, Oscillatoria agardhii and Euglena gracillis were recorded throughout the year. Chlorella, Stigeoclonium, Pandorina, Micratinium, Oscillatoria, Anacystis, Nitzschia and Cymbella were found to be good indicators of water pollution.     

Runoff and soil loss from steep slopes treated with low cost bioengineering measures

Soil loss and surface runoff patterns were studied in erosion plots developed on manmade steep slopes (60 percent) over three years (1997–2000) in which rainfall ranged from 1338.4 to 1429.2 mm/year. Surface runoff and soil loss was examined under three different rainfall intensity classes. Runoff was mainly controlled by the rainfall distribution pattern on the seasonal scale. The soil loss was influenced by runoff during the first year. Both soil loss and runoff were reduced due to bioengineering measures in the first year irrespective of species planted. In the third year, combined effects of growth of grasses on protected plots, soil compaction and sediment exhaustion was noticed on runoff and soil loss. This was reflected by reduction in the runoff and soil loss from untreated and treated plots. In the high intensity class, reduction in runoff in treated plots was about 50 percent in three years and reduction in soil loss ranged between 94–95 percent in all plots. Physical treatment with brushwood structures was more efficient in erosion control in the low intensity class.     

Microbe-mediated sustainable bio-recovery of gold from low-grade precious solid waste: A microbiological overview

In an era of electronics, recovering the precious metal such as gold from ever increasing piles of electronic-wastes and metal-ion infested soil has become one of the prime concerns for researchers worldwide. Biological mining is an attractive, economical and non-hazardous to recover gold from the low-grade auriferous ore containing waste or soil. This review represents the recent major biological gold retrieval methods used to bio-mine gold. The biomining methods discussed in this review include, bioleaching, bio-oxidation, bio-precipitation, bio-flotation, bio-flocculation, bio-sorption, bio-reduction, bio-electrometallurgical technologies and bioaccumulation. The mechanism of gold biorecovery by microbes is explained in detail to explore its intracellular mechanistic, which help it withstand high concentrations of gold without causing any fatal consequences. Major challenges and future opportunities associated with each method and how they will dictate the fate of gold bio-metallurgy from metal wastes or metal infested soil bioremediation in the coming future are also discussed. With the help of concurrent advancements in high-throughput technologies, the gold bio-exploratory methods will speed up our ways to ensure maximum gold retrieval out of such low-grade ores containing sources, while keeping the gold mining clean and more sustainable.     

Disinfection of wastewater: comparative evaluation of chlorination and DHS-biotower

The present study reports the onsite evaluation of two pilot scale disinfection units. One of the pilot plants is based on chlorination, and other is based on fixed film aerobic process (biotower). Evaluation study consisted of onsite monitoring of COD, BOD5 and TSS and fecal coliform over a period of three months. Samples were collected from the inlet and outlet of the pilot plants. These pilot plants were evaluated so as to have an appropriate disinfection technology for the treatment of the effluents from upflow anaerobic sludge blanket reactor (UASBR) based sewage treatment plants which could meet the biological quality standards. All the influents samples collected from both the pilot plants contained fecal coliform ranging from 105 to 10(6) MPN/100 ml. The results show that the fecal coliform removal is up to 98.2% and 100% forbiotower and chlorination, respectively. Both, the chlorination and down hanging sponge-biotower (DHS-biotower) improved the quality of effluent from the UASBRin terms of COD, BOD5 and TSS. Though chlorination performed better compared to the DHS-biotower, however, it has additional risk associated with the formation of trihalomethanes (THMs).