Combustion and inorganic bromine emission of waste printed circuit boards in a high temperature furnace

High temperature combustion experiments of waste printed circuit boards (PCBs) were conducted using a lab-scale system featuring a continuously-fed drop tube furnace. Combustion efficiency and the occurrence of inorganic bromine (HBr and Br₂) were systematically studied by monitoring the main combustion products continuously. The influence of furnace temperature (T) was studied from 800 to 1400 °C, the excess air factor (EAF) was varied from 1.2 to 1.9 and the residence time in the high temperature zone (RT_HT) was set at 0.25, 0.5, or 0.75 s.Combustion efficiency depends on temperature, EAF and RT_HT; temperature has the most significant effect. Conversion of organic bromine from flame retardants into HBr and Br₂ depends on temperature and EAF. Temperature has crucial influence over the ratio of HBr to Br₂, whereas oxygen partial pressure plays a minor role. The two forms of inorganic bromine seem substantially to reach thermodynamic equilibrium within 0.25 s. High temperature is required to improve the combustion performance: at 1200 °C or higher, an EAF of 1.3 or more, and a RT_HT exceeding 0.75 s, combustion is quite complete, the CO concentration in flue gas and remained carbon in ash are sufficiently low, and organobrominated compounds are successfully decomposed (more than 99.9%).According to these results, incineration of waste PCBs without preliminary separation and without additives would perform very well under certain conditions; the potential precursors for brominated dioxins formation could be destroyed efficiently. Increasing temperature could decrease the volume percentage ratio of Br₂/HBr in flue gas greatly.     

催化臭氧氧化法处理维生素C生产废水

采用催化臭氧氧化工艺处理维生素C生产废水.考察了不同工艺条件对废水COD、色度、Ca2+去除率的影响.实验结果表明,催化剂为TiO2(20％,质量分数,下同)-SiO2(80％),反应温度75℃,水力停留时间30min的最佳工艺条件下,处理后出水的COD、色度和ρ(Ca2+)分别为63.9 mg/L、0倍和49.4 mg/L,COD、色度和Ca2+去除率分别为78％、100％和95％.出水水质指标满足GB8986-1996《污水综合排放标准》.     

间歇式活性污泥法处理制革废水

介绍了间歇式活性污泥法 (SBR法 )处理制革废水的工程概况及工程调试和试运转情况 ,认为SBR法的特殊运行工序是适合处理制革废水的。     

危险废物回转窑焚烧系统的工艺设计

介绍杭州市危险废物回转窑焚烧处理示范工程的一期规模、工艺流程及主要设备的设计方法。     

大型环保设施建设中的政府民间合作融资模式

对基础设施和公共工程建设中常用的10种政府民间合作融资模式进行分析,并探讨其在环保设施建设中的具体运用。     

Distribution and hydrodynamic model of the Keumdong oil spill in Kwangyang Bay, Korea

Oil concentrations in the seawater, seabed sediments, and shoreline sediments were measured from the samples collected 165 days after the Keumdong oil spill accident, which had occurred in Kwangyang Bay of the South Sea, Korea in September 1993. Distribution patterns of the concentrations in the seabed and shoreline sediments have allowed us to hindcast the transport and fate of the spilled oil. Overall, the patterns agree better with the southward (seaward) surface water circulation than with the northward (landward) bottom water circulation over the region. Rapid, initial dispersal of the spilled oil to the south and its subsequent grounding onto the intertidal seabed sediments, as well as onto the shorelines, appear to have made ineffective the subsurface oil transport by the bottom current.     

9种硝基苯对鱼肝微粒体EROD活性的影响

混合功能氧化酶系(mixed function oxidase,MFO)中的敏感指标,7-乙氧基-异吩唑酮-脱乙基酶(7-ethoxyresorufin-O-deethylase,EROD)已作为生物标志物,应用于生态毒理学研究领域.笔者以苯并(a)芘作为阳性对照,采用鲤鱼肝脏体外直接染毒测定EROD的方法,分析了9种硝基苯对EROD活性的诱导影响.      

用铬渣作水泥矿化剂

介绍了铬渣作水泥矿化剂的原理和生产控制条件,通过经济和环境效益分析证明,铬渣作水泥矿化剂确实是一种处理和利用铬渣的好方法。     

绿色分离技术-超临界流体萃取的应用

介绍了超临界流体的性质及萃取过程,主要介绍了超临界流体萃取技术在医药、食品、环保及分析领域方面的应用。     

中国西部本底大气中CO的连续测量

在中国西北部的瓦里关全球基准站(36°17'N,100°54'E,3810m asl)建立了气相色谱-汞置换法大气CO连续测量系统.组装调试和运行标定表明,色谱方法的基线稳定,分离度高,检测方法可靠,系统具有高自动化的操作性能和严格的质量控制,其设计完全符合世界气象组织(WMO)全球大气本底测量的要求.根据采样现场大气CO浓度的变化,采用经国际比对的CO标准气系列,用峰高外标法设定可调整的标准工作曲线计算环境CO浓度,系统对CO的检测限低至1×10^-9(V/V),检测精度小于0.1%,准确度在±0.05%以内,可提供我国本底地区近地层大气CO连续而精确的现场测量结果.