Getting the ‘pulse’ of your employees: the use of cardiovascular research in better understanding behavior in organizations

Cardiovascular disease has severe consequences for both individual betterment and organizational health. Yet, organization‐based cardiovascular research remains quite limited. This commentary addresses this void by integrating research dating from the famous Hawthorne experiments with current medical science. It then suggests future organizational research on cardiovascular health and recommends use of specific composite cardiovascular measures to advance our understanding of the organizational implications of cardiovascular disease. Copyright © 2006 John Wiley & Sons, Ltd.     

The impact of impression‐management tactics on supervisor ratings of organizational citizenship behavior

Previous research indicates that the use of impression management is related to supervisor ratings of employee likeability and job performance. It has been argued, though, that employees might also use impression management so that their superiors will see them as ‘good soldiers’ who engage in high levels of organizational citizenship behaviors (OCBs). This study investigates the ways in which three types of impression management—namely, job‐focused, self‐focused, and supervisor‐focused tactics of impression management—influence supervisor ratings of OCB. Using a sample of 122 supervisor‐subordinate dyads, the findings indicate that supervisor‐focused tactics of impression management are positively related to OCB ratings, while job‐focused tactics are negatively related to such evaluations. Additionally, citizenship behaviors are positively related to supervisor liking of the employee and overall ratings of job performance. Finally, the results suggest that OCB ratings mediate the relationship between supervisor‐focused tactics of impression management and supervisor evaluations of employee likeability. Some implications of this study and directions for future research are also addressed. Copyright © 2006 John Wiley & Sons, Ltd.     

Locus of control at work: a meta‐analysis

This study meta‐analyzed the relationships between locus of control (LOC) and a wide range of work outcomes. We categorized these outcomes according to three theoretical perspectives: LOC and well‐being, LOC and motivation, and LOC and behavioral orientation. Hypotheses reflecting these three perspectives were proposed and tested. It was found that internal locus was positively associated with favorable work outcomes, such as positive task and social experiences, and greater job motivation. Our findings are discussed in relation to research on core self‐evaluation and the Big Five personality traits. Copyright © 2006 John Wiley & Sons, Ltd.     

On the response of 500 gal propane tanks to a 25% engulfing fire

This paper presents detailed data on the thermal response of two 500 gal ASME code propane tanks that were 25% engulfed in a hydrocarbon fire. These tests were done as part of an overall test programme to study thermal protection systems for propane-filled railway tank-cars.

The fire was generated using an array of 25 liquid propane-fuelled burners. This provided a luminous fire that engulfed 25% of the tank surface on one side. The intent of these tests was to model a severe partially engulfing fire situation.

The paper presents data on the tank wall and lading temperatures and tank internal pressure. In the first test the wind reduced the fire heating and resulted in a late failure of the tank at 46 min. This tank failed catastrophically with a powerful boiling liquid expanding vapour explosion (BLEVE). In the other test, the fire heating was very severe and steady and this tank failed very quickly in 8 min as a finite rupture with massive two-phase jet release. The reasons for these different outcomes are discussed. The different failures provide a range of realistic outcomes for the subject tank and fire condition.     

On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.     

Considerations for Manufacturing Bio-Based Plastic Products

One engine that drives the United States’ economic growth is an ever-increasing demand for manufactured products, both at home and abroad. This increase has created a major concern for the environment in terms of disposing used goods and ensuring that these products are safe. As environmental concerns grow, however, renewable resources are gaining increasing attention, especially as industrial ecology and product biodegradability gain importance. Added to this, biological materials are increasingly being utilized to replace traditional materials in manufacturing. To aid both educators as well as researchers, this paper examines several considerations that are essential for manufacturing plastic products that contain biomaterials. These include the selection of materials, the selection of manufacturing processes, manufacturing costs, and the quality of final products. Additionally, several standard methods that are commonly used for the determination of mechanical and physical properties are compiled; thus this paper should be a useful resource for both educators and researchers. The trends discussed here and their implications are critical for those involved in manufacturing, because contrary to conventional wisdom, simultaneously meeting the material production needs of our society, as well as that of the environment are not mutually-exclusive.     

Application of tracer ratio and inverse dispersion methods with boat-based plume measurements to estimate ammonia emissions from seabird colonies

Ammonia emissions from two contrasting seabird colonies in Scotland were measured, based on the determination of atmospheric concentrations downwind of the colonies. Atmospheric concentrations of ammonia (NH₃) across the downwind plume were compared with the inverse application of a Gaussian dispersion model (ID) to calculate the modelled NH₃ emission that would generate the measured cross-wind-integrated plume concentration. In parallel, a tracer gas (sulphur hexafluoride, SF₆) was released from the colonies with air samples taken to allow determination of SF₆ concentrations. On the basis of the known emission rate of SF₆, the magnitude of ammonia emissions was estimated by the cross-wind-integrated tracer ratio (TR) of NH₃/SF₆ concentrations. Coupled with data on annual bird attendance, the measurements indicate annual emissions from the Isle of May and the Bass Rock of 18 and 132 tonnes NH₃-N year^–1, respectively. The measured NH₃ emissions were compared with estimates of seabird nitrogen excretion to estimate the proportion of excreted N that is volatilised as NH₃ (F_Nr). The emission estimates of the two methods compared favourably, giving 4 and 6 kg NH₃-N h^–1 (F_Nr = 15%) for the Isle of May for the ID and TR methods, respectively, and 21 and 25 kg NH₃-N h^–1 (F_Nr = 50%) for the Bass Rock for the ID and TR methods, respectively. The results provide the first measurement-based estimates to allow regional up scaling of ammonia emissions from seabirds.     

The GaNE programme in a global perspective

This paper provides the background to this special issue, outlining the extent to which the global atmospheric nitrogen cycle has been modified by human activity and outlining the range of effects. The global total emissions of reduced and oxidized nitrogen, amount to 124 Tg N, and exceed those from natural sources (34 Tg N) by almost a factor of four showing the extent to which anthropogenic activity has taken over the global N cycle. Of the 124 Tg N, 70 Tg N is emitted in the oxidized form, largely as NO and 70% of which results directly from anthropogenic activity. The remaining 54 Tg N is emitted as NH₃, (66% anthropogenic). The enhanced nitrogen emissions are associated with a range of local, regional and global issues including, acidification, eutrophication, climate change, human health and tropospheric O₃. The paper also places the Global Nitrogen Enrichment (GaNE) research programme in the UK in a wider perspective.