Correction methods for organic carbon artifacts when using quartz-fiber filters in large particulate matter monitoring networks: the regression method and other options

Sampling and handling artifacts can bias filter-based measurements of particulate organic carbon (OC). Several measurement-based methods for OC artifact reduction and/or estimation are currently used in research-grade field studies. OC frequently is not artifact-corrected in large routine sampling networks (e.g., U.S. Environmental Protection Agency (EPA)'s Chemical Speciation Network). In some cases, the OC artifact has been corrected using a regression method (RM) for artifact estimation. In this method, the gamma-intercept of the regression of the OC concentration on the fine particle (PM2.5) mass concentration is taken to be an estimate of the average OC sampling artifact (net of positive and negative artifacts). This paper discusses options for artifact correction in large routine sampling networks. Specifically, the goals are to (1) articulate the assumptions and limitations inherent to the RM, (2) describe other artifact correction approaches, and (3) suggest a cost-effective method for artifact correction in large monitoring networks. The RM assumes a linear relationship between measured OC and PM mass: a constant slope (OC mass fraction) and a constant intercept (RM artifact estimate). These assumptions are not always valid. Additionally, outliers and other individual data points can have a large influence on the RM artifact estimates. The RM yields results within the range of measurement-based methods for some datasets and not for others. Given that the adsorption of organic gases increases with atmospheric concentrations of organics, subtraction of an average artifact from all samples (e.g., across multiple sites) will underestimate OC for lower-concentration samples (e.g., clean sites) and overestimate OC for higher-concentration samples (e.g., polluted sites). For relatively accurate, simple, and cost-effective artifact OC estimation in large networks, the authors suggest backup filter sampling on at least 10% of sampling days at all sites with artifact correction on a sample-by-sample basis as described herein.     

The toxicity of sulfamethazine to Daphnia magna and its additivity to other veterinary sulfonamides and trimethoprim

Sulfonamides (SAs), the oldest chemotherapeutic agents used for antimicrobial therapy, still play an important role in veterinary mass treatments. Consequently, traces of these compounds, alone or in combinations, have been repeatedly detected in the environment. Sulfamethazine (SMZ) deserves particular attention not only because it is the most used veterinary SA, but also due to its proven effects on fertility in mice and on thyroid hormone homeostasis in rats. In this study, after evaluating the acute toxicity to Daphnia magna of six veterinary SAs and trimethoprim (TMP), the additivity of SMZ to each other compound was tested using the isobologram method. Two reproduction tests on the same biological model were also performed in order to derive LOEC and NOEC of SMZ. The acute EC₅₀ was in the range 131–270 mg L⁻¹ for all the compounds tested with the exception of sulfaguanidine (EC₅₀ = 3.86 mg L⁻¹). In acute binary tests SMZ showed a complex interaction with sulfaquinoxaline (superadditivity, additivity or subadditivity) at the three different combination ratios tested, simple additivity to TMP and less than additive interaction when paired to the other SAs. LOEC and NOEC of SMZ obtained from reproduction tests were 3.125 and 1.563 mg L⁻¹, respectively. In conclusion, SMZ should not harm the crustacean population at environmentally realistic concentrations. Its toxicity is comparable to that of other systemic SAs, and their binary interactions are less than additive. The same can not be entirely said for enteric SAs, and considering that these compounds are administered at high doses and mostly excreted in unmetabolised form, further evaluation of their impact to the aquatic environment seems advisable.     

A Monte-Carlo Simulation of the Ozone Attainment Process

A Monte-Carlo simulation of the approach to attainment of the National Ambient Air Quality Standard for ozone has been performed for the California Bay Area Air Quality Management District. Four compliance tests together with different design values are used in the simulation. The results show that the present compliance test requiring a zero-percent chance of violation and the design value represented by the fourth highest value in three years makes both the standard and the control requirement much more stringent than generally assumed. In fact, to attain the standard on a long-term basis would require annual means and annual second-highest values that are close to those of the rural background ozone. The simulation also shows that by taking into account the fluctuation of ozone concentrations in the compliance test, such as a t test, and by using a design value consistent with the test, a standard defined in terms of the three-year mean of the annual second-highest values not only is more consistent with the currently- perceived stringency of the present standard, but may also be attainable with a more reasonable control requirement.     

Ecotoxicity and biodegradability of antielectrostatic dicephalic cationic surfactants

Four series of dicephalic cationic surfactants, considered as new antielectrostatic agents have been investigated in order to establish their toxicity and biodegradability. Among them N,N-bis[3,3′-(dimethylamine)propyl]alkylamides, N,N-bis[3,3′-(dimethylamine)propyl]alkylamide dihydrochlorides, N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dibromides and N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dimethylsulphates with different hydrophobic chain length (n-C₉H₁₉ to n-C₁₅H₃₁) and type of counterion (chloride, bromide and methylsulfate) have been studied. The inhibitory effect against microorganisms has been examined using model gram-positive and gram-negative bacteria, and yeasts. None of the tested surfactants have shown antimicrobial activity against gram-negative bacteria (Escherichia coli, Pseudomonas putida) and yeasts (Saccharomyces cerevisiae, Rhodotorula glutinis) at a concentration below 1000 μg mL⁻¹, however some of them were moderately active against gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis). The Microtox® test was successfully applied to measure EC₅₀ values of the studied dicephalic cationic surfactants. Their toxicity to Vibrio fischeri depended upon the alkanoyl chain length with the EC₅₀ values in a range of 2.6-980 mg L⁻¹. N,N-bis[3,3′-(dimethylamine)propyl]alkylamide dihydrochlorides 2a-b and N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dibromides 3a-b comprising n-decanoyl and n-dodecanoyl hydrophobic tails appeared to be the least toxic. Furthermore, the biodegradability under aerobic conditions of 2a-b, 3a-b was evaluated using OECD Method 301F. According to the obtained results 2a, 3a-3b can be considered as almost readily biodegradable and they are not expected to be persistent in the environment. Additionally, partial biodegradation was observed for 2b, indicating its possible biodegradation in wastewater treatment systems.     

Examination of the Enzyme Resistance of Polyurethane Powder Coatings

Polyurethanes powder lacquers were obtained in a reaction hydroxy terminated polyester resin RUCOTE 102 and blocked polyisocyanate crosslinkers. The polyisocyanates were synthesized using alicyclic diisocyanates (IPDI and H₁₂MDI) and monohydric aliphatic alcohols as well as dibutyltin dilaurate and triethylamine as a catalysts. The biodegradation experiments were realized in solution consisted of lipase (Novozym 735, Novozym 51,032, Lipolase 100L or Palatase 20,000) and phosphate buffer during 42 days at 37 °C. The biodegradation progress was controlled by using optical microscopy method, thermal analysis TG/DTA, DSC method, surface free energy parameters, total organic carbon measurements and sample weight loss. The three-dimensional surface topography of the powder lacquers by means of confocal microscope was investigated. The values of surface roughness parameters were calculated.     

Thirty-year trends in suspended sediment in seven Lake Erie tributaries

Sediment is an important pollutant for Lake Erie and its tributaries as a carrier of other substances and as a pollutant in its own right. Environmental managers have called for major reductions in sediment loadings in Lake Erie tributaries. In this study, 30-yr (1975-2005) datasets with daily resolution are analyzed to identify and interpret trends in sediment concentrations and loads in major US tributaries to Lake Erie. The Maumee and Sandusky Rivers in agricultural northwest Ohio show continual decreases throughout this period, but the River Raisin shows increases, especially in the last decade. The urban and forested Cuyahoga River shows little trend before 2000 but shows increases since then. The mostly forested Grand River shows strong decreases before 1995, little change thereafter until the early 2000s, and then increases. In most cases, the greatest decreases or smallest increases, depending on the river, are associated with summer and fall and with low flow conditions, whereas the smallest decreases or greatest increases are associated with the spring and with high flow conditions. Analysis of concentration-flow relationships indicates that these changes are not due to weather but reflect positive and negative anthropogenic influences. Sediment decreases in the northwestern Ohio tributaries seem to reflect the successful use of agricultural practices to reduce erosion and prevent sediment loss. Opportunities for further reductions in sediment loads and concentrations lie in better management of sediment losses during winter and spring.     

Social Networks and Community-Based Natural Resource Management

We conducted case studies of three successful examples of collaborative, community-based natural resource conservation and development. Our purpose was to: (1) identify the functions served by interactions within the social networks of involved stakeholders; (2) describe key structural properties of these social networks; and (3) determine how these structural properties varied when the networks were serving different functions. The case studies relied on semi-structured, in-depth interviews of 8 to 11 key stakeholders at each site who had played a significant role in the collaborative projects. Interview questions focused on the roles played by key stakeholders and the functions of interactions between them. Interactions allowed the exchange of ideas, provided access to funding, and enabled some stakeholders to influence others. The exchange of ideas involved the largest number of stakeholders, the highest percentage of local stakeholders, and the highest density of interactions. Our findings demonstrated the value of tailoring strategies for involving stakeholders to meet different needs during a collaborative, community-based natural resource management project. Widespread involvement of local stakeholders may be most appropriate when ideas for a project are being developed. During efforts to exert influence to secure project approvals or funding, however, involving specific individuals with political connections or influence on possible sources of funds may be critical. Our findings are consistent with past work that has postulated that social networks may require specific characteristics to meet different needs in community-based environmental management.     

Levels of PCDDs, PCDFs and dioxin-like PCBs in raw cow's milk collected in France in 2006

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) as well as polychlorinated biphenyls (PCBs) are widespread environmental contaminants. A French national survey was carried out in April 2006 to assess the concentrations of PCDD/Fs and dioxin-like PCBs (DL-PCBs) in raw cow's milk. A random sampling scheme stratified by region was applied to collect 239 raw milk samples from 93 plants belonging to 17 dairy companies. Compared to a previous survey led in 1998 analyzing half-skimmed drinking milk in France, the PCDD/Fs level was cut by half, with an average concentration of 0.33 pg toxic equivalent (TEQ)/g fat in 2006. The mean DL-PCBs concentration was 0.57 pg TEQ/g fat and subsequently the sum of PCDD/Fs and DL-PCBs was 0.90 pg/g fat, values below the thresholds defined by the European Union regulations.     

The contingent effect of constructive confrontation on the relationship between shared mental models and decision quality

Work teams are being utilized more frequently to give organizations access to the broader knowledge and skill base of employees, as well as to provide for adaptive, efficient decision‐making. In teams, we argue that constructive confrontation norms are an important contingency variable in the relationship between mental model similarity and decision quality. Mental model similarity helps team members understand one another's perspectives and reduces the likelihood of conflict. Accordingly, mental model similarity improves decision quality. When strong norms of constructive confrontation are in place, however, teams are in a better position to reap the benefits of conflict (greater diversity of inputs) without experiencing its negative consequences. Thus, when constructive confrontation norms are strong, less mental model similarity (i.e., more diversity of perspectives) is likely to improve decision quality. Copyright © 2007 John Wiley & Sons, Ltd.