Heat shock protein 47 stress responses in Chinese hamster ovary cells exposed to raw and reclaimed wastewater

As wastewater reclamation and reuse becomes more widespread, risks of exposure to treated wastewater increase. Moreover, an unlimited number of pollutants can be identified in wastewater. Therefore, comprehensive toxicity assessment of treated wastewater is imperative. The objective of this study was to perform a comprehensive toxicity assessment of wastewater treatment systems using stress response bioassays. This powerful tool can comprehensively assess the toxicity of contaminants. In this study, samples from conventional activated sludge treatment, membrane bioreactors (MBRs) with different pore sizes and sludge retention times (SRTs), rapid sand filtration, coagulation, nano-filtration (NF) and reverse osmosis (RO) were investigated. The results of stress response bioassays confirmed that the secondary effluent showed higher stress response than influent indicating that biological treatment generates toxic compounds. The results obtained from molecular weight fractionation of water samples demonstrated that organic matter with a higher molecular weight fraction (>0.1 μm) causes toxicity in secondary effluent. Furthermore, supernatant from MBR reactors showed toxicity regardless of SRT. On the other hand, stress response was not detected in MBR permeates except for an MBR equipped with a larger pore size membrane (0.4 μm) and with a short SRT (12 days). While rapid sand filtration could not remove the toxic compounds found in secondary effluent, coagulation tests, operated at an appropriate pH, were effective for reducing stress response in the secondary effluent. Experimental findings also showed that stress response was not detected in cases of NF and RO permeate subsequent to MBR treatment.     

中国固体废物的环境管理与环境监测技术现状

为加强中国固体废物的环境管理和环境监测技术,回顾了中国自１９８５年以来制定的固体放心物环境管理法规制度以及１９８４年至１９９８年颁布的２０多年家或行业的固体废物处置标准体系等固体废物的环境管理状况,着重论述了中国固体废物环境监测技术的发展历史与现状。指出经过２０多年的努力,在固体废物环境监测技术与方法上初步形成了该领域框架体系,有固体废物的采样与制样技术;危险废物的有害特性试验鉴别方法,固体废物具     

Shell disturbances and butyltins burden in commercial bivalves collected from the Bizerta lagoon (northern Tunisia)

Shell disturbances and soft tissues butyltin burden were investigated in commercial bivalves Lithophaga lithophaga, Mytilus galloprovincialis, Solen marginatus and Crassostrea gigas from the Bizerta lagoon. Shell disturbances were found in all bivalves, being scarce in S. marginatus. In the internal valve of L. lithophaga, burrowing annelids and sipunculids living inside galleries were observed, while in the external valve, brown-blackish or white stains were found. In M. galloprovincialis, a yellowish mass located at the shell anterior side was found fixed firmly to the pearly layer by a hard brownish structure covering some annelid elliptic eggs. In the internal shell layer of some specimens collected in April, embryos belonging to tubiculous annelids at various developmental stages were observed. In C. gigas, shell thickening was revealed in some specimens corresponding to white doughy deposits at the internal valve and between shell layers. In S. marginatus, only one specimen showing a cavity at the posterior site was found. Total butyltin concentrations in the studied bivalves varied between 30 and 245?ng/g dry weight with tributyltin (TBT) being the predominant compound. The highest concentration was recorded in L. lithophaga collected from the Bizerta Bay and the lowest concentration in S. marginatus from Maghraoua. This study provided baseline data that could serve for long-term monitoring of TBT pollution in Tunisia, since legislation to reduce the use of TBT-based antifouling paints has not been introduced yet.     

Interspecific and geographical variations of trace metal concentrations in cephalopods from Tunisian waters

The concentrations of six metals (Ag, Cd, Cu, Hg, Pb, and Zn) were investigated and compared in three tissues (arms, digestive gland, and mantle) of three cephalopod species from the Tunisian waters: the common octopus (Octopus vulgaris), the common cuttlefish (Sepia officinalis), and the European squid (Loligo vulgaris). Whatever the species or the sites, the digestive gland displayed the highest concentrations of Ag, Cd, Cu, Pb, and Zn, highlighting its major role in their bioaccumulation and detoxification. This is also true for Hg but only for the digestive gland of O. vulgaris. Muscle from the arms and the mantle contained thus relatively low trace metal concentrations except for Hg in L. vulgaris and S. officinalis. Geographic comparison of metal concentrations in Tunisian cephalopods from three locations indicates that higher concentrations of Ag, Pb, and Hg were observed in cephalopods from northern and eastern coasts, whereas the highest Cd levels were detected in the southeastern, reflecting different conditions of exposure. Comparing the trace element concentrations between species, Ag, Cd, Cu, Hg, and Zn concentrations were the highest in the digestive gland of octopuses. This may be related to the differences in ecological features and swimming behavior among different cephalopod species. Effects of length and sex on metal levels were also considered, indicating a limited influence of sex on metal concentration.     

A PROPOSED APPROACH TO COORDINATION OF WATER RESOURCE DEVELOPMENT AND ENVIRONMENTAL REGULATIONS1

ABSTRACT: The planning and developing of water resources to meet the country's needs for water supply, flood control, hydroelectric power, irrigation, and navigation now needs to take more account of environmental needs and regulations. Water resource development is often beneficial to the environment, but may also be harmful, as in cases involving salmon and various other endangered species. As a national objective, the environment must be preserved and in some cases restored; but how can this be done consistent with other national objectives, relating to life and welfare of human beings? This problem has aroused the concern of many engineers and water scientists. As a result, a national conference on this subject was held in Chicago in June 1998, as an integral part of ASCE's Annual Conference on Water Resources Planning and Management and the Annual Conference on Environmental Engineering. At the conclusion of that conference, a post-conference meeting was held by a group of prominent water resource practitioners. It was concluded at this meeting that action should be taken by our government to establish a new form of interagency approach, involving the states, as a means of coordination in cases of national importance.     

New Fe-immobilized natural bentonite plate used as photo-Fenton catalyst for organic pollutant degradation

Novel photo-Fenton catalysts were prepared by immobilizing iron species on commercial bentonite plates via two methods: (1) ion exchange reaction (Fe³⁺ vs. Na⁺) by aqueous suspension powder-clay/FeCl₃ followed by plate preparation, and (2) forced hydrolysis of Fe(NO₃)₃ onto a prefabricated clay plate. The last method led to a more photo-active Fe-oxide/bentonite plate. This material allowed, at a non-adjusted initial pH of 5.5 and in the presence of H₂O₂, the total degradation of resorcinol and 55% mineralization in 80 and 100 min of irradiation, respectively. The reached degradation percentages were correlated to the presence of dissolved iron, demonstrating that in these processes, the homogeneous photo-Fenton reactions were mainly responsible for the resorcinol elimination.Likewise, in slurry system, where clay has normally an increased surface area, there was no increase in activity because of a reduced leached iron probably due to the diminished light penetration in the suspension. Despite the lower surface area, in comparison to that of the slurry, the clay plates have the advantage, as heterogeneous photo-catalysts, that separation of the reaction media after treatment is not needed, and thus, a potential use for batch and continuous reaction systems is proposed.     

Dose estimation and radon action level problems due to nanosize radon progeny aerosols in underground manganese ore mine

One of the essential parameters influencing of the dose conversion factor is the ratio of unattached short-lived radon progeny. This may differ from the value identified for indoor conditions when considering special workplaces such as mines. Inevitably, application of the dose conversion factors used in surface workplaces considerably reduces the reliability of dose estimation in the case of mines.This paper surveyed the concentration of radon and its short-lived radon progeny and identified the unattached fraction of short-lived radon progeny. As well equilibrium factor during the month of August was calculated simultaneously at two extraction faces in a manganese ore mine.During working hours the average radon concentrations were 220 Bq m⁻³ and 530 Bq m⁻³ at Faces 1 and 2; the average short-lived progeny concentration was 90 Bq m⁻³ and 190 Bq m⁻³, the average equilibrium factors were 0.46 and 0.36, and the average unattached fractions were 0.21 and 0.17, respectively. The calculated dose conversion factor was between 9 and 27 mSv WLM⁻¹, but higher values could also be possible.     

The use of commercial and industrial waste in energy recovery systems - A UK preliminary study

With 2020 energy targets set out by the EU fast approaching, the UK is trying to source a higher proportion of its energy from renewable resources. Coupled with this, a growing population and increasing trends in consumer demand have resulted in national waste loads increasing. A possible solution to both issues is energy-from-waste (EfW) technologies. Many studies have focused on municipal solid waste (MSW) as a potential feedstock, but appear to overlook the potential benefits of commercial and industrial waste (C&IW). In this study, samples of C&IW were collected from three North West waste management companies and Lancaster University campus. The samples were tested for their gross and net calorific value, moisture content, ash content, volatile matter, and also elemental composition to determine their suitability in EfW systems. Intra-sample analysis showed there to be little variation between samples with the exception two samples, from waste management site 3, which showed extensive variation with regards to net calorific value, ash content, and elemental analysis. Comparisons with known fuel types revealed similarities between the sampled C&IW, MSW, and refuse derived fuel (RDF) thereby justifying its potential for use in EfW systems. Mean net calorific value (NCV) was calculated as 9.47 MJ/kg and concentrations of sulphur, nitrogen, and chlorine were found to be below 2%. Potential electrical output was calculated using the NCV of the sampled C&IW coupled with four differing energy generation technologies. Using a conventional incinerator with steam cycle, total electrical output was calculated as 24.9 GWh, based on a plant operating at 100,000 tpa. This value rose to 27.0 GWh when using an integrated gasification combined cycle. A final aspect of this study was to deduce the potential total national electrical output if all suitable C&IW were to be used in EfW systems. Using incineration coupled with a steam turbine, this was determined to be 6 TWh, 1.9% of the national demand thereby contributing 6.5% towards the UK’s 2020 renewable electricity target.     

Improvement of fruit and vegetable waste anaerobic digestion performance and stability with co-substrates addition

The effect of fish waste (FW), abattoir wastewater (AW) and waste activated sludge (WAS) addition as co-substrates on the fruit and vegetable waste (FVW) anaerobic digestion performance was investigated under mesophilic conditions using four anaerobic sequencing batch reactors (ASBR) with the aim of finding the better co-substrate for the enhanced performance of co-digestion. The reactors were operated at an organic loading rate of 2.46–2.51 g volatile solids (VS) l⁻¹ d⁻¹, of which approximately 90% were from FVW, and a hydraulic retention time of 10 days. It was observed that AW and WAS additions with a ratio of 10% VS enhanced biogas yield by 51.5% and 43.8% and total volatile solids removal by 10% and 11.7%, respectively. However FW addition led to improvement of the process stability, as indicated by the low VFAs/Alkalinity ratio of 0.28, and permitted anaerobic digestion of FVW without chemical alkali addition. Despite a considerable decrease in the C/N ratio from 34.2 to 27.6, the addition of FW slightly improved the gas production yield (8.1%) compared to anaerobic digestion of FVW alone. A C/N ratio between 22 and 25 seemed to be better for anaerobic co-digestion of FVW with its co-substrates. The most significant factor for enhanced FVW digestion performance was the improved organic nitrogen content provided by the additional wastes. Consequently, the occurrence of an imbalance between the different groups of anaerobic bacteria which may take place in unstable anaerobic digestion of FVW could be prevented.