The weight method: a new screening method for estimating pesticide deposition from knapsack sprayers in developing countries

Investigations of occupational and environmental risk caused by the use of agrochemicals have received considerable interest over the last decades. And yet, in developing countries, the lack of staff and analytical equipment as well the costs of chemical analyses make it difficult, if not impossible, to monitor pesticide contamination and residues in humans, air, water, and soils. A new and simple method is presented here for estimation of pesticide deposition in humans and soil after application. The estimate is derived on the basis of water mass balance measured in a given number of high absorbent papers under low evaporative conditions and unsaturated atmosphere. The method is presented as a suitable, rapid, low cost screening tool, complementary to toxicological tests, to assess occupational and environmental exposure caused by knapsack sprayers, where there is a lack of analytical instruments. This new method, called the “weight method”, was tested to obtain drift deposition on the neighbouring field and the clothes of the applicator after spraying water with a knapsack sprayer in one of the largest areas of potato production in Colombia. The results were confirmed by experimental data using a tracer and the same set up used for the weight method. The weight method was able to explain 86% of the airborne drift and deposition variance.     

Culture,local capacity,and outside aid: a community perspective on disaster response after the 2009 tsunami in American Sāmoa

Research on diverse cultural contexts has indicated that aid organisations often fail to leverage local, culturally‐grounded resources and capacities in disaster‐affected communities. Case‐study methodology was employed to explore the relationship between local and external disaster response efforts in American Sāmoa following the earthquake and tsunami on 29 September 2009 in the southern Pacific Ocean, with a specific focus on the role of culture in defining that relationship. Interview and focus group data from 37 participants, along with observational data, suggested that the local response to the event was swift and grounded in Samoan cultural systems and norms. External aid was viewed as helpful in some respects, although, on the whole, it was seen as a disruption to village hierarchies, social networks, and local response efforts. The study discusses the implications for the role of outside aid in diverse cultural contexts, and makes suggestions for improving the ecological fit of post‐disaster interventions.     

20 Years on lessons learned from Piper Alpha. The evolution of concurrent and inherently safe design

It has now been well over 20 years since the North Sea Piper Alpha disaster in 1988. There have been many lessons learned; some documented others just etched in memory. The event chronicled many significant changes in the offshore industry. The emanating point for most sweeping changes has been the Cullen Report and the UK North Sea industry. This paper reviews some of the critical lessons and identifies many ‘secondary’ finer points that constitute important learnings. The paper looks at major changes instigated by step changes in safety criticality. It is argued that the ‘second tier’ modes of failure such as corrosion, materials degradation, environmental cracking, erosion, plant ergonomics, etc. need to be better examined. These mechanisms are dangerous threats to the integrity of deep subsea assets, and it is noted that such root causes of failure as witnessed or predicted have yet to be fully appraised. The authors’ use wide experiences and case histories to highlight such concerns, offering rational fit-for-purpose solutions. The industry disconnections between, urgency to build, knowledge transfer, and management of change, are refocused. Powerful advances in risk-based mechanical, process, materials, and corrosion engineering are emphasized and the use of key performance indicators (KPIs) are reasoned for best life-cycle integrity. To keep up with the pace of growth in the deepwater sector, methods of concurrent and inherently safe design have evolved in a world where the practicalities and costs of modification, repair and retrofit are extremely difficult. Hence getting it right at the outset is paramount. Thus the drive for purposeful investment, at design is more justifiable, than the traditional practice of postponing costs (and problems) to operations. In this way the ominous ‘gray’ zone between the two cost centers is better bridged for reasons of safety and commercial advantage.     

River habitat monitoring and assessment in Germany

Whereas assessing the biological and chemical quality of water is a standard environmental procedure in many countries, the use of habitat survey methods that assess the ecomorphological quality of rivers is relatively new. In Europe, the EC Water Framework Directive requires such assessment from all EU Member States. In Germany, the first river habitat assessments were introduced in the late 1990 s. Each federal state develops its own river habitat map using the 'On-site Survey' and/or the 'Overview Survey'. The assessment describes the difference of the actual condition from a previously defined reference condition. In practice, a defined 'potential for restoration', a more realistic condition, makes restoration activities much easier and more successful. In Germany, the first River Habitat Map 2001 was published in 2002. The survey covered 33,000 km of river length, which equates to 10% of all rivers. A wide range from 'Undisturbed' (class 1) to 'Totally Disturbed' (class 7) river units exists; 77% of them are 'Clearly Disturbed' (class 4) or in worse condition. These result reflects extensive anthropogenic impact on the environment in general, but also past intense technical river 'improvements' that focused on the protection of settlements and traffic routes from flooding, better shipping conditions, the use of water power, and drainage of floodplains for agriculture and urban development. For comparability of survey results between EU Member States, a harmonization of national survey methods is in progress. A crucial point here is the definition of the reference condition for each river (near-natural conditions), since it influences the survey results.     

CLIMATE CHANGE AND WATERSHED PLANNING IN WASHINGTON STATE1

ABSTRACT: This paper draws on interviews with Washington State Watershed Planning Leads (Planning Leads) and interactions with local watershed planning units to identify factors that may influence the inclusion of climate change in watershed planning efforts in Washington State. These factors include the interest of individual planning unit members in climate change; Planning Lead familiarity with climate impacts; the influence of trust, leadership, and “genetic knowledge” on planning units; and perceptions of strategic gain. The research also identifies aspects of the planning process that may create opportunities for addressing climate impacts in future planning. These aspects include continuation of watershed planning units after plans are developed; commitment to updating watershed plans; recognition of climate impacts in planning documentation; dedicated incentive funding; and the availability of hydrologic modeling tools for assessing hydrologic impacts. Additional types of technical assistance that could support integration of climate impacts are also identified. It is hoped that the insight provided by this analysis will help individuals involved in stakeholder‐based watershed planning recognize the various dynamics potentially affecting the inclusion of climate change in watershed planning and in doing so, contribute to the development of planning approaches and tools that will support local efforts to adapt to climate impacts.     

Untersuchungen zur Nachhaltigkeit der Sanierung von Tributylzinnkontaminiertem Hafensediment durch Landablagerung

To allow ships to pass, most harbours have to be liberated from sedimented material. These sediments often contain high concentrations of tributyltin (TBT), which is used as a biocide in antifouling paints. Thus, the problem of a disposal which is acceptable with respect to a minimum risk for humans and the environment arises. The aim of our project was to assess land deposition as an alternative in dealing with TBT-contaminated harbour sediments. Therefore, we followed the biological degradation of TBT under aerobic and anaerobic conditions at different temperatures using defined laboratory experiments, and got important information about the land deposition, performing field measurements including biomonitoring. The biological degradation of TBT is faster under aerobic conditions and with increasing temperature. The half-lives found show the dependency of the degradation rates on the temperature between 5–55°C. The degradation rate determined for water under the same conditions (just biological degradation, without photolysis) is almost 4 times higher than in sediment. The field studies showed degradation rates of a maximum of 10–15% per year in untreated sediment and 30% per year in restacked sediments. We did not observe any interference of released TBT with ground water or surrounding areas. The TBT uptake in plants was low. Based on our results a multidimensional risk evaluation was performed, concerning the TBT and its degradation products dibutyltin (DBT) and monobutylin (MBT) released from the deposition areas. The land deposition appears to be a sustainable solution for dealing with TBT-contaminated harbour sediments.     

Landfill Bioreactor Cells as Ecofilters for Extraction of Bio-energy and Nutrients from Solid Wastes

This paper describes a modified, ecologically based waste treatment technique, where municipal solid waste is anaerobically treated in landfill reactorcells in a way that both bio-energy and nutrients can be recovered. The controlled landfill reactorcell ('bioreactor-cell') serves as an anaerobic filter, where energy is extracted as biogas while nutrients are recovered through the leachates. The leachates can be used as fertilizer in e.g. energy forests within the controlled landfill area, and thus nutrients can be brought back into an ecocycle. At the same time anaerobic conditions result in an effective immobilization of heavy metals and other pollutants, e.g. through complexation to organic matter or as insoluble metal sulphides, which are immobilized in the fermentation residue. The long-lived organic fraction, remaining after the fermentation process has declined, containing a high content of lignine, serves as a water-holding matrix. Thus it helps to enforce a sustainable high moisture level, resulting in sustainable anaerobic conditions with heavy metals retained on a long-term basis. Also non-degradable products, like plastics, help to shield off oxygen and maintain reliable anaerobic conditions. Landfilling of organic matter under anaerobic conditions is a measure to counteract increasing concentrations of CO₂ in the atmosphere, resulting from human activities. A small fraction of the organic matter is long-term accumulated in the landfill, and the processes can be compared to those of natural wetlands.