Backset and cervical retraction capacity among occupants in a modern car

OBJECTIVES: The horizontal distance between the back of the head and the frontal of the head restraint (backset) and rearward head movement relative to the torso (cervical retraction) were studied in different occupant postures and positions in a modern car. METHODS: A stratified randomized population of 154 test subjects was studied in a Volvo V70 year model 2003 car, in driver, front passenger, and rear passenger position. In each position, the subjects adopted (i) a self-selected posture, (ii) a sagging posture, and (iii) an erect posture. Cervical retraction, backset, and vertical distance from the top of the head restraint to the occipital protuberance in the back of the head of the test subject were measured. These data were analyzed using repeated measures ANOVA and linear regression analysis with a significance level set to p < 0.05. RESULTS: In the self-selected posture, the average backset was 61 mm for drivers, 29 mm for front passengers, and 103 mm for rear passengers (p < 0.001). Women had lower mean backset (40 mm) than men (81 mm), particularly in the self-selected driving position. Backset was larger and cervical retraction capacity lower in the sagging posture than in the self-selected posture for occupants in all three occupant positions. Rear passengers had the largest backset values. Backset values decreased with increased age. The average cervical retraction capacity in self-selected posture was 35 mm for drivers, 30 mm for front passengers, and 33 mm for rear passengers (p < 0.001). CONCLUSIONS: Future design of rear-end impact protection may take these study results into account when trying to reduce backset before impact. Our results might be used for future development and use of BioRID manikins and rear-end tests in consumer rating test programs such as Euro-NCAP.     

On the road to ‘research municipalities’: analysing transdisciplinarity in municipal ecosystem services and adaptation planning

Transdisciplinary research and collaboration is widely acknowledged as a critical success factor for solution-oriented approaches that can tackle complex sustainability challenges, such as biodiversity loss, pollution, and climate-related hazards. In this context, city governments’ engagement in transdisciplinarity is generally seen as a key condition for societal transformation towards sustainability. However, empirical evidence is rare. This paper presents a self-assessment of a joint research project on ecosystem services and climate adaptation planning (ECOSIMP) undertaken by four universities and seven Swedish municipalities. We apply a set of design principles and guiding questions for transdisciplinary sustainability projects and, on this basis, identify key aspects for supporting university–municipality collaboration. We show that: (1) selecting the number and type of project stakeholders requires more explicit consideration of the purpose of societal actors’ participation; (2) concrete, interim benefits for participating practitioners and organisations need to be continuously discussed; (3) promoting the ‘inter’, i.e., interdisciplinary and inter-city learning, can support transdisciplinarity and, ultimately, urban sustainability and long-term change. In this context, we found that design principles for transdisciplinarity have the potential to (4) mitigate project shortcomings, even when transdisciplinarity is not an explicit aim, and (5) address differences and allow new voices to be heard. We propose additional guiding questions to address shortcomings and inspire reflexivity in transdisciplinary projects.     

Life cycle assessment and sustainable engineering in the context of near net shape grown components: striving towards a sustainable way of future production

Technical product harvesting (TEPHA) is a newly developing interdisciplinary approach in which bio-based production is investigated from a technical and ecological perspective. Society‘s demand for ecologically produced and sustainably operable goods is a key driver for the substitution of conventional materials like metals or plastics through bio-based alternatives. Technical product harvesting of near net shape grown components describes the use of suitable biomass for the production of technical products through influencing the natural shape of plants during their growth period. The use of natural materials may show positive effects on the amount of non-renewable resource consumption. This also increases the product recyclability at the end of its life cycle. Furthermore, through the near net shape growth of biomass, production steps can be reduced. As a consequence such approaches may save energy and the needed resources like crude oil, coal or gas. The derived near net shape grown components are not only considered beneficial from an environmental point of view. They can also have mechanical advantages through an intrinsic topology optimization in contrast to common natural materials, which are influenced in their shape after harvesting. In order to prove these benefits a comprehensive, interdisciplinary scientific strategy is needed. Here, both mechanical investigations and life cycle assessment as a method of environmental evaluation are used.     

Blood clinical-chemical parameters and feeding history in growing Japanese quail (Coturnix japonica) chicks exposed to Tris(1,3-dichloro-2-propyl) phosphate and Dechlorane Plus in ovo

Blood clinical-chemical parameters (BCCPs) are used to investigate physiological consequences attributed to exposure to anthropogenic stressors, such as exposure to Tris(1,3-dichloro-2-propyl) phosphate (TDCIPP) and Dechlorane Plus (DP), which are flame retardants (FRs), on avian health. Japanese quail (Coturnix japonica) were used as a model species to investigate individual and mixture effects of both FRs by injecting different concentrations (5, 50, or 500 ng/µL) of either of these compounds as well as a 1:1 mixture of both into fertilized eggs. To estimate post-hatching effects, 18 BCCPs were evaluated from 101 chicks at day 14. Albumin levels were found to be significantly elevated in the groups exposed to high doses of TDCIPP alone as well as a mixture of TDCIPP and DP. However, during the course of the study, the initial corn-based feed had to be substituted by a fishmeal-based feed. The 8 days consuming the new feed played a significant role on 12 of 18 BCCPs measured. Consequently, it is recommended that dietary habits need to be considered when investigating the physiological impact of contaminants using BCCPs as biomarkers in growing nestlings both in controlled in vivo and field experiments.     

Carbon monoxide concentrations in outdoor wood-fired kitchens in Ouagadougou,Burkina Faso—implications for women’s and children’s health

A majority of households in developing countries rely on biomass fuel for cooking, typically burned in open fires or simple stoves. The incomplete combustion of these fuels causes adverse health effects such as respiratory diseases, especially among women and children. However, quantitative data on pollution levels and on associated diseases are limited. We examined cooking habits and self-reported health in 31 households with outdoor open wood fires in Ouagadougou, Burkina Faso, using structured interviews. In eight households, carbon monoxide (CO) was measured using passive sampling. In addition, meteorology and ambient CO concentrations were assessed. The average CO concentration during cooking was 4.3 ppm, with a maximum of 65.3 ppm and minimum of 0.3 ppm (1-min values). A clear daily pattern was observed, with relatively low concentrations during the day and high during the evening, occasionally exceeding the World Health Organization 1- and 8-h guidelines when the air stabilised. On average, CO concentrations were 43 % higher in kitchens located in closed yards than in those located in open yards, showing that fireplace location affected the levels. Eye irritation and coughing among women and children were reported by 30 % of the households. Based on previously reported relations between CO concentrations and fine particles (<2.5 μm), the exposure to biomass smoke appears to be high enough to pose a considerable health risk among women and children in households with outdoor open wood fires. The results suggest that burning should be limited between sunset and dawn and in areas with limited ventilation to reduce pollutions levels.     

Echolocation behavior and signal plasticity in the Neotropical bat Myotis nigricans (Schinz, 1821) (Vespertilionidae): a convergent case with European species of Pipistrellus?

We used both field and flight cage observations to investigate the echolocation and foraging behavior of the seldom studied, small, aerial insectivorous bat Myotis nigricans (Vespertilionidae) in Panama. In contrast to its temperate congeners, M. nigricans foraged extensively in open space and showed an echolocation behavior well adapted to this foraging habitat. It broadcast narrowband echolocation signals of 7 ms duration that enhance the chance of prey detection in open space. Because of rhythmical alternations of signal amplitude from signal to signal in our sound recordings of search signals in open space, we conclude that the bats scanned their environment with head movements, thereby enlarging their search volume. In edge-and-gap situations, and in the flight cage, M. nigricans introduced an initial broadband component to its search calls. In the field and in the flight cage, M. nigricans hawked for prey in aerial catches; gleaning was never observed. M. nigricans demonstrates call structures, such as narrow bandwidth and rather long signals adapted to foraging predominantly in open space. Moreover, call structure is highly plastic, allowing M. nigricans to forage in edge-and-gap situations also. These adaptations in call structure and plasticity have evolved convergently at least twice within the genus Myotis. Finally, M. nigricans echolocation and foraging behavior parallels that of the small, aerial, insectivorous pipistrelle bats (Vespertilionidae), which are not closely related to M. nigricans but forage in similar habitats.     

A registry of nationally appropriate mitigation actions: goals, outcomes, and institutional requisites

This article examines key issues in operationalizing a registry of nationally appropriate mitigation actions (NAMAs) undertaken by developing countries party to the United Nations framework convention on climate change. It analyzes goals, outcomes, and institutional prerequisites underlying various proposals to determine how a NAMA mechanism could work in international climate cooperation. The different proposals for how NAMA shall be designed relate to three basic effort-sharing arrangements in a future climate regime: binding commitments for all Parties, purely voluntary commitments for all, and legally binding commitments for Annex I countries but voluntary ones for others. We conclude that a NAMA registry could be designed so as initially to suit all three types of effort-sharing regimes. The article identifies three areas of potential common ground in a registry irrespective of effort-sharing type: the principle of common but differentiated responsibilities, the sustainable development objectives of the Convention, and the need for a systemic transition toward low-carbon energy technologies.     

Tri-decabrominated diphenyl ethers and hexabromocyclododecane in indoor air and dust from Stockholm microenvironments 2: indoor sources and human exposure

Data on polybrominated diphenyl ether (PBDE) and hexabromocyclododecane (HBCD) concentrations from Stockholm, Sweden, indoor microenvironments were combined with information from detailed questionnaires regarding the sampling location characteristics, including furnishing and equipment present. These were used to elucidate relationships between possible flame-retarded sources and the contaminant concentrations found in air and dust. Median concentration ranges of ΣPenta-, ΣOcta-, ΣDecaBDE and HBCD from all microenvironments were 19-570, 1.7-280, 29-3200 and < 1.6-2 pg/m³ in air and 22-240, 6.1-80, 330-1400 and 45-340 ng/g in dust, respectively. Significant correlations were found between concentrations of some PBDEs and HBCD in air and/or dust and the presence of electronic/electrical devices, foam furniture, PUF mattresses and synthetic bed pillows in, as well as floor area and construction year of the microenvironment. Car interiors were a source to indoor air in dealership halls. Using median and maximum concentrations of ΣPenta-, ΣOcta-, ΣDecaBDE and HBCD in air and dust, adult and toddler (12-24 months) intakes from inhalation and dust ingestion were estimated. Toddlers had higher estimated intakes of ΣPenta-, ΣDecaBDE and HBCD (7.8, 43, 7.6 ng/d, respectively) from dust ingestion than adults (5.8, 38, 6.0 ng/d, respectively). Air inhalation in offices was also an important exposure pathway for ΣPenta-, ΣOcta- and ΣDecaBDE in adults. For ΣPentaBDE and HBCD, air inhalation and dust ingestion play minor roles when compared to previously published Swedish dietary intakes (median exposures). However, in worst case scenarios using maximum concentrations, dust ingestion may represent 77 and 95% of toddler intake for ΣPentaBDE and HBCD, respectively.