A study on torrefaction characteristics of waste sawdust in an auger type pyrolyzer

Torrefaction is thermo-chemical process which can improve solid fuel quality as well as grindability. In previous studies, torrefaction has been studied mainly for removal of moisture and for improving grindability. In this experiment, the characteristics of torrefied waste sawdust were studied especially for its energy yield. Hence, torrefaction was performed on varying reaction temperatures (200, 220, 240, 260, 280, 300 °C) and solid residence time (10, 30, 60 min). The results indicated that the yield of torrefaction decreases with increasing temperature and residence time. It was found that above 280 °C, the yield got remarkably decreased. The lowest yield was obtained at the residence time of 60 min. It was also noticed that the HHV of torrefied samples increases with increasing temperature. The highest HHV was found to be 26.09 MJ/kg which was obtained at 60 min and 300 °C. However, the highest energy yield was obtained to be 104.17 % which was noticed at 30 min and 260 °C.     

Characterization of food waste from different sources in Hong Kong

Food waste from different sources or at different generation stages may have different compositional characteristics and is therefore suitable for recycling into different products. To have a better understanding of their chemical composition, five food waste types were collected, namely, household kitchen waste (HH), preconsumption and postconsumption food waste from a hotel (Hpr and Hpo), wet market food waste (WM) and kitchen waste from a Chinese restaurant (CR), and their compositions were assessed monthly for 1 year. They served as suitable feedstock for various conversion technologies according to their chemical profiles. HH and CR had higher crude protein content (26%) and considerable amounts of minerals, making them nutritionally suitable for feeding animals. Preconsumption food wastes Hpr and WM had more favorable C:N ratios (16.5–17.4) and crude fat contents (4.6–6.5%) as feedstock for composting. Postconsumption food wastes were potential feedstock for the production of biogas and biodiesel because of the higher dry matter (>26%) and fat content (>13%). The coefficients of variation (CV) in all nutrients analyzed except Ca for postconsumption food wastes ranged from 5% to 37%, which showed lower temporal variability than preconsumption food wastes (CVs 10–131%). This implies that the composition of postconsumption food waste was relatively less fluctuating and can be considered a more reliable feedstock for food waste conversion.

Implications: Characterization of food waste composition from different sources and determination of their temporal variation were performed to understand their characteristics and facilitate sound food waste management. Separating food wastes according to their sources and types helps reduce their composition variability, and thus increases the consistence in food-waste-derived products and recycling success. Study on temporal variation indicates that postconsumption food wastes varied less with time and could serve as reliable feedstocks for food waste conversion.     

Improvement of Synthesis and Dielectric Properties of Polyurethane/Mt-QASs<Superscript>+</Superscript> (Novel Synthesis)

Polyurethane-based nanocomposites were prepared and their dielectric properties were characterized. Polyurethane (PU) composites were prepared with different organoclay content (1, 3, 5, and 10 wt% for all cases). The composites included quaternary ammonium salts such as 1-methyl-di-octyl-1 phenyl ammonium iodide (QAS-1), 1-methyl-di-nonyl-1 phenyl ammonium iodide (QAS-2), and 1-methyl-di-dodecyl-1 phenyl ammonium iodide (QAS-3) which were newly synthesized for modification of Na⁺-montmorillonite. Addition of aluminum silicate enhanced the dielectric properties at a constant concentration. Dielectric constants of nanocomposites compounded with 3 %- and 5 %-organoclay were close in value. The characterization of PU/organoclay composites was carried out using Fourier transform infrared and X-ray diffraction.     

Standardized reporting of the costs of management interventions for biodiversity conservation

Effective conservation management interventions must combat threats and deliver benefits at costs that can be achieved within limited budgets. Considerable effort has focused on measuring the potential benefits of conservation interventions, but explicit quantification of the financial costs of implementation is rare. Even when costs have been quantified, haphazard and inconsistent reporting means published values are difficult to interpret. This reporting deficiency hinders progress toward a collective understanding of the financial costs of management interventions across projects and thus limits the ability to identify efficient solutions to conservation problems or attract adequate funding. We devised a standardized approach to describing financial costs reported for conservation interventions. The standards call for researchers and practitioners to describe the objective and outcome, context and methods, and scale of costed interventions, and to state which categories of costs are included and the currency and date for reported costs. These standards aim to provide enough contextual information that readers and future users can interpret the cost data appropriately. We suggest these standards be adopted by major conservation organizations, conservation science institutions, and journals so that cost reporting is comparable among studies. This would support shared learning and enhance the ability to identify and perform cost‐effective conservation.     

沉积物毒性鉴别评估技术在一个有着多重污染物输入地点的应用

沉积物毒性鉴别评估用于确定造成沉积物整体毒性测试中观察到有害效果的原因。然而在多污染物的情况下,将总体毒性划分为为不同个体污染物单独造成的毒性的方法存在很多问题。利用一个有着多重输入与相关污染物的站点数据,我们为毒性鉴别评估提出一种通过追踪毒性单位（TUs）来确定是否囊括全部毒性的方法。首先确定出沉积物整体的毒性水平,然后将毒性来源划分至几种污染物大类,例如氨类,金属,非极性有机物等。本文中毒性很大程度上来源于非极性有机物,所以在萃取沉积物之后,将萃取物重新加回稀释水中以检测毒性的复原。每一部分污染物的毒性占比由溶剂梯度测量,并进行毒性检测。目标占比由气相色谱-质谱分析得到,从而鉴定出与特定成分相关的毒性。之后对这些成分相关的毒性单位进行测定以确定可能的原因组合和是否已囊括全部毒性。数据表明毒性既与已有化合物相关,又与新兴污染物相关,而两种污染物对于总体毒性的具体贡献则随实验地点改变。
精选自Howard C. Bailey, Catherine A. Curran, Peter Arth, Bonnie P. Lo, Rich Gossett. Application of Sediment Toxicity Identification Evaluation Techniques to a Site with Multiple-Contaminants. Environmental Toxicology and Chemistry: Volume 35, Issue 10, pages 2456–2465, October 2016. DOI: 10.1002/etc.3488
详情请见http://onlinelibrary.wiley.com/doi/10.1002/etc.3488/full
     

Effects of controller-pilot communication medium,flight phase and the role in the cockpit on pilots’ workload and situation awareness

This study explores the effects of communication medium, flight phase, and the role in the cockpit on pilots’ workload and situation awareness. Eight pilots with the experience of Controller-Pilot Data Link Communications (CPDLCs) participated in this simulated experiment. Two types of communication medium (voice and datalink), three types of flight phase (departure, cruise, and arrival), and two types of role (pilot flying and pilot non-flying) were investigated in the experiment. The results indicated that flight phase is a significant factor and cruise is the most suitable phase for datalink use on pilots’ acceptance, workload, and situation awareness performance. Both medium and role were not the significant factors. Since there is no significant difference on medium when no extra tasks and interferences involved in a normal flight, that the use of CPDLC can be justified during all phases of a no-event flight. In addition, the results of usability indicated that the simulated CPDLC with command selection functions proposed in this study provides good utility for the participants. In order to use the CPDLC for all phases of flight in the future, adding more command selection functions in place of typing messages by pilots and accommodating appropriate interfaces for different phases are recommended to enhance the usability of the CPDLC unit.     

Evaluation on exposures to particulate matter at a junior secondary school: a comprehensive study on health risks and effective inflammatory responses in Northwestern China

Air pollutant measurement and respiratory inflammatory tests were conducted at a junior secondary school in Xi’an, Northwestern China. Hazardous substances including particulate matters (PMs), black carbon (BC) and particle-bounded polycyclic aromatic hydrocarbons (PAHs) were quantified both indoors and outdoors of the school. Source characterization with organic tracers and particle-size distribution demonstrated that the school’s air was mostly polluted by combustion emissions from the surrounding environment. The evaluation of health assessment related to air quality was conducted by two methods, including potential risk estimation of air pollutants and direct respiratory inflammatory test. The incremental lifetime cancer risks associated with PAHs were estimated and were 1.62 × 10⁻⁶ and 2.34 × 10⁻⁶, respectively, for indoor and outdoor fine PMs. Both the values exceeded the threshold value of 1 × 10⁻⁶, demonstrating that the carcinogenic PAHs are a health threat to the students. Respiratory inflammatory responses of 50 students who studied in the sample classroom were examined with a fractional exhaled nitric oxide (FeNO) test, with the aid of health questionnaires. The average FeNO concentration was 17.4 ± 8.5 ppb, which was slightly lower than the recommended level of 20 ppb established by the American Thoracic Society for children. However, a wide distribution and 6% of the values were > 35 ppb, suggesting that the potentials were still high for eosinophilic inflammation and responsiveness to corticosteroids. A preliminary interpretation of the relationship between air toxins and respiratory inflammatory response demonstrated the high exposure cancer risks and inflammatory responses of the students to PMs in the city.

     

Effect of complex shape of pier foundation exposure on time development of scour

Environmental Fluid Mechanics - Local pier scour has been recognized as one of the most significant causes of bridge failures. Despite numerous studies on the subject of local pier scour have been...     

Fertilizer drawn forward osmosis as an alternative to 2nd pass seawater reverse osmosis: Estimation of boron removal and energy consumption

• The boron concentration in diluted DS can satisfy the irrigation water standard. • The boron concentration in diluted DS equaled that in two-pass RO permeate. • FDFO process SEC was slightly lower than the 2nd pass RO SEC. • FDFO has potential as an alternative to 2nd pass RO for irrigation water production. Agriculture is the largest consumer of freshwater. Desalinated seawater is an important alternative water source for sustainable irrigation. However, some issues of the current desalination technology hinder its use for agriculture irrigation, including low boron removal and high energy consumption. This study systematically explored the feasibility of employing fertilizer drawn forward osmosis (FDFO) as an alternative to 2nd pass reverse osmosis (RO) by considering the boron removal performance and specific energy consumption (SEC). Different operating conditions were investigated, such as the boron and NaCl concentrations in feed solution (FS), draw solution (DS) concentration, pH, the volume ratio of FS to DS, membrane orientation, flow rate, and operating temperature. The results indicated that a low boron concentration in FS and high pH DS (pH= 11.0) decreased the boron solute flux, and led to low final boron concentration in the DS. The other operating conditions had negligible influence on the final DS boron concentration. Also, a lower flow rate and higher specific water flux with certain permeate water volumes were conducive to reducing the SEC of the FDFO process. Overall, our study paves a new way of using FDFO in irrigation, which avoids the phytotoxicity and human health risk of boron. The results show the potential of FDFO as an alternative to 2nd pass RO for irrigation water production.     

Clinical confirmation of trichothecene mycotoxicosis in patient urine

The investigations of four Cases involving mold-contaminated buildings and human reaction to exposure, documents tests of extracted urine containing trichothecene mycotoxins confirming exposure and the diagnosis of mycotoxicosis in humans. In each of four Cases, the urine demonstrated antibiotic activity, sulfuric acid charring, and protein release. Urine was extracted using ethyl acetate 40V/60V[EA]. Extracted mycotoxin spotted on (TLC) displayed color and a range of (rf) between 0.2-0.6 using various solvents. Extract was re-suspended using 50% ethanol V/V to inject mycotoxins into weanling female Sprague-Dawley rats. Degeneration and necrosis of the rat's tissue followed. Koch's Postulates conditions were fulfilled by isolation of the causative agent, the trichothecene mycotoxins and the reproduction of disease. Examination of human tissue within the urine extraction group confirms Koch's Postulates and comparative pathology confirms inhalation Mycotoxicosis, with severe necrosis of the central nervous system and severe scarring within the lungs. Extraction of mycotoxins from human patient urine is a very useful confirmatory test to demonstrate exposure and identify mycotoxicosis. Low concentrations (6%) of sodium hypochlorite were ineffective against the activity of trichothecene mycotoxin. The severity or stages of disease directly correlates the level of exposure or poisoning (Patent Pending).