Influences of chemical activators on incinerator bottom ash

This research has applied different chemical activators to mechanically and thermally treated fine fraction (<14 mm) of incinerator bottom ash (IBA), in order to investigate the influences of chemical activators on this new pozzolanic material. IBA has been milled and thermally treated at 800 degrees C (TIBA). The TIBA produced was blended with Ca(OH)(2) and evaluated for setting time, reactivity and compressive strength after the addition of 0.0565 mole of Na(2)SO(4), K(2)SO(4), Na(2)CO(3), K(2)CO(3), NaOH, KOH and CaCl(2) into 100g of binder (TIBA+Ca(OH)(2)). The microstructures of activated IBA and hydrated samples have been characterized by X-ray diffraction (XRD) and thermogravimetry (TG) analysis. Thermal treatment is found to produce gehlenite (Ca(2)Al(2)SiO(7)), wollastonite (CaSiO(3)) and mayenite (Ca(12)Al(14)O(33)) phases. The thermally treated IBA samples are significantly more reactive than the milled IBA. The addition of Na(2)CO(3) can increase the compressive strength and calcium hydroxide consumption at 28-day curing ages. However, the addition of Na(2)SO(4), K(2)SO(4), K(2)CO(3), NaOH and KOH reduces the strength and hydration reaction. Moreover, these chemicals produce more porous samples due to increased generation of hydrogen gas. The addition of CaCl(2) has a negative effect on the hydration of TIBA samples. Calcium aluminium oxide carbonate sulphide hydrate (Ca(4)Al(2)O(6)(CO(3))(0.67)(SO(3))(0.33)(H(2)O)(11)) is the main hydration product in the samples with activated IBA, except for the sample containing CaCl(2).     

Methane generation in tropical landfills: simplified methods and field results

This paper deals with the use of simplified methods to predict methane generation in tropical landfills. Methane recovery data obtained on site as part of a research program being carried out at the Metropolitan Landfill, Salvador, Brazil, is analyzed and used to obtain field methane generation over time. Laboratory data from MSW samples of different ages are presented and discussed; and simplified procedures to estimate the methane generation potential, Lo, and the constant related to the biodegradation rate, k are applied. The first order decay method is used to fit field and laboratory results. It is demonstrated that despite the assumptions and the simplicity of the adopted laboratory procedures, the values Lo and k obtained are very close to those measured in the field, thus making this kind of analysis very attractive for first approach purposes.     

Bench-scale composting of source-separated human faeces for sanitation

In urine-diverting toilets, urine and faeces are collected separately so that nutrient content can be recycled unmixed. Faeces should be sanitized before use in agriculture fields due to the presence of possible enteric pathogens. Composting of human faeces with food waste was evaluated as a possible method for this treatment. Temperatures were monitored in three 78-L wooden compost reactors fed with faeces-to-food waste substrates (F:FW) in wet weight ratios of 1:0, 3:1 and 1:1, which were observed for approximately 20 days. To achieve temperatures higher than 15 degrees C above ambient, insulation was required for the reactors. Use of 25-mm thick styrofoam insulation around the entire exterior of the compost reactors and turning of the compost twice a week resulted in sanitizing temperatures (>or=50 degrees C) to be maintained for 8 days in the F:FW=1:1 compost and for 4 days in the F:FW=3:1 compost. In these composts, a reduction of >3 log(10) for E. coli and >4 log(10) for Enterococcus spp. was achieved. The F:FW=1:0 compost, which did not maintain >or=50 degrees C for a sufficiently long period, was not sanitized, as the counts of E. coli and Enterococcus spp. increased between days 11 and 15. This research provides useful information on the design and operation of family-size compost units for the treatment of source-separated faeces and starchy food residues, most likely available amongst the less affluent rural/urban society in Uganda.     

Waste management from pulp and paper production in the European Union

Eleven million tonnes of waste are produced yearly by the European pulp and paper industry, of which 70% originates from the production of deinked recycled paper. Wastes are very diverse in composition and consist of rejects, different types of sludges and ashes in mills having on-site incineration treatment. The production of pulp and paper from virgin pulp generates less waste but the waste has similar properties to waste from the production of deinked pulp, although with less inorganics. Due to legislation and increased taxes, landfills are quickly being eliminated as a final destination for wastes in Europe, and incineration with energy recovery is becoming the main waste recovery method. Other options such as pyrolysis, gasification, land spreading, composting and reuse as building material are being applied, although research is still needed for optimization of the processes. Due to the large volumes of waste generated, the high moisture content of the waste and the changing waste composition as a result of process conditions, recovery methods are usually expensive and their environmental impact is still uncertain. For this reason, it is necessary to continue research on different applications of wastes, while taking into account the environmental and economic factors of these waste treatments.     

Natural Weathering Studies of Polypropylene

Polypropylene (PP) has achieved a dominating position and hence, their consumption increases thereby littering, which lead to environmental pollution. Photodegradation seems to be a better choice because of naturally available sunlight as energy source for degradation. The present work involves the study of the variation of degradation behavior of PP film during tropical summer and winter seasons. The photodegradation is followed by Fourier transform infrared (FTIR) spectroscopic technique. Various indices like hydroxyl, carbonyl, vinylidene, lactones, ester, carboxylic acid and crystallinity are calculated and these values increased after a brief induction period. The variation in the mechanical properties like tensile strength and elongation at break percentages are determined. The scanning electron microscopic (SEM) images of weathered PP showed surface cracks when carbonyl index value increases sharply and the mechanical properties show a sudden decrease. Attempted life time prediction using mathematical models showed that the carbonyl growth is more affected by ultraviolet (UV) and cumulative total solar radiation for PP weathered during summer. The loss in tensile strength of PP weathered during summer is more dependent on the average temperature and the UV portion of the total solar radiation whereas, intensity of UV radiation has profound effect on the tensile strength of PP weathered during winter.     

The Effect of Masterbatch Addition on the Mechanical, Thermal, Optical and Surface Properties of Poly(lactic acid)

There has been considerable interest in the use of the biodegradable polymer poly(lactic acid) (PLA) as a replacement for petroleum derived polymers due to ease of processability and its high mechanical strength. Other material properties have however limited its wider application. These include its brittle properties, low impact strength and yellow tint. In an attempt to overcome these drawbacks, PLA was blended with four commercially available additives, commonly known as masterbatches. The effect of the addition of 1.5 wt% of the four masterbatches on the mechanical, thermal, optical and surface properties of the polymer was evaluated. All four masterbatches had a slight negative effect on the tensile strength of PLA (3–5% reduction). There was a four fold increase in impact resistance however with the addition of one of the masterbatches. Differential scanning calorimetry demonstrated that this increase corresponded to a decrease in the polymer crystallinity. However there was an associated increase in polymer haze with the addition of this masterbatch. The clarity of PLA was improved through the addition of an optical brightener masterbatch, but the impact resistance remained low. The glass transition and melting temperatures of PLA were not affected by the addition of the masterbatches, and no change was observed in surface energy. Some delay in PLA degradation, in a PBS degradation medium at 50 °C, was observed due to blending with these masterbatches.     

Seat Belt Use in States and Territories with Primary and Secondary Laws -- United States, 2006

Problem

Motor-vehicle crashes are a leading cause of death in the United States. In the event of a crash, seat belts are highly effective in preventing serious injury and death.

Methods

Data from the 2006 Behavioral Risk Factor Surveillance System were used to calculate prevalence of seat belt use by state and territory and by type of state seat belt law (primary vs. secondary enforcement).

Results

In 2006, seat belt use among adults ranged from 58.3% to 91.9% in the states and territories. Seat belt use was 86.0% in states and territories with primary enforcement laws and 75.9% in states with secondary enforcement laws.

Discussion

Seat belt use continues to increase in the United States. Primary enforcement laws remain a more effective strategy than secondary enforcement laws in getting motor-vehicle occupants to wear their seat belts.     

Injury and loss concentration by sinkings in fishing fleets

Sinkings of fishing vessels, when accompanied by human loss, are accidents which lead to a great social upheaval, especially in the local area where they occur. In order to avoid or reduce these accidents, national governments must include in their legislation for this sector the appropriate safety measures. These resources and their distribution must be assigned in accordance with the needs of the accidentality, this requiring a detailed knowledge of the concentration of accidentality of a country’s fishing sector. In this context, the aim of the present work is twofold: first, to formulate a methodology for the fishing sector of a country, allowing the inequalities in the concentration of sinking accidents to be analysed; and second, to apply this methodology to the Spanish fishing fleet. Thus, two indices are constructed per region and type of fishing, for two variables: fishermen and vessels. Results are obtained both for the concentration of accidents and the associated Lorenz curves. An increase in the inequality in the spatial and functional distribution of these accidents is verified.     

Collective work and resilience of complex systems

This article aims to describe the characteristics of collective working situations in complex systems – especially those in nuclear power plants – related to common forms of cooperation, in order to improve systems resilience. In addition, we will try to detail some aspects of collective working situations, emphasizing the differences between various forms of control. The similarities between work activities (multi-addressed messages, linkage to regulation, central and peripheral information) are nonetheless exposed. We conclude by proposing a contribution to support systems design, thus facilitating cooperation in teamwork activities.     

Climate dynamics and extreme precipitation and flood events in Central Europe

Past changes and possible future variations in the nature of extreme precipitation and flood events in Central Europe and the Alpine region are examined from a physical standpoint. An overview is given of the following key contributory physical processes: (1) the variability of the large-scale atmospheric flow and the associated changes of the North-Atlantic storm track; (2) the feedback process between climate warming and the water cycle, and in particular the potential for more frequent heavy precipitation events; and (3) the catchment-scale hydrological processes associated with variations in major river flooding events and that are related to land-use changes, river training measures, and shifts in the proportion of rain to snowfall. In this context an account is provided of the possible future forecasting and warning methodologies based upon high-resolution weather prediction and runoff models. Also consideration is given to the detectability of past (future) changes in observed (modeled) extreme events. It is shown that their rarity and natural fluctuation largely impedes a detection of systematic variations. These effects restrict trend analysis of such events to return periods of below a few months. An illustration using daily precipitation from the Swiss Alps does yield evidence for pronounced trends of intense precipitation events (return period 30 days), while trends of stronger event classes are not detectable (but nevertheless can not be excluded). The small detection probability for extreme events limits possible mitigation of future damage costs through an abatement of climate change alone, and points to the desirability of developing improved early forecasting/warning systems as an additional no-regret strategy. This revised version was published online in July 2006 with corrections to the Cover Date.