颗粒物对紫外线灭活二级出水中粪大肠菌的影响

用低压紫外线照射具有相同颗粒物粒径分布的一系列水样,把实验结果带入二重动力学模型进行计算,评价自然状态下颗粒物对粪大肠菌的保护作用. 结果表明,二级出水中的大部分粪大肠菌都与颗粒物交连在一起;在颗粒物<10⁵ C·mL^-1时,颗粒物的增加会明显降低紫外线对二级出水中粪大肠菌的灭活率,但当颗粒物>10⁵ C·mL^-1时,这种影响不明显.从二重动力学模型的计算结果来看,对于不同颗粒物浓度的水样,难灭活的微生物所占的比重很小且比较稳定,大多数与颗粒物结合的粪大肠菌都较易被紫外线灭活.     

Water Transactions for Streamflow Restoration,Water Supply Reliability,and Rural Economic Vitality in the Western United States

Across the western United States, environmental water transaction programs (EWTPs) restore environmental flows by acquiring water rights and incentivizing changes in water management. These programs have evolved over several decades, expanding from relatively simple two‐party transactions to multiobjective deals that simultaneously benefit the environment and multiple water‐using sectors. Such programs now represent an important water management tool and provide an impetus for collaboration among stakeholders; yet, most evaluations of their effectiveness focus exclusively on environmental outcomes, without adequate attention to impacts on other water users or local economies. To understand how these programs affect stakeholders, a systematic, multiobjective evaluation framework is needed. To meet this need, we developed a suite of environmental and socioeconomic indicators that can guide the design and track the implementation of water transaction portfolios, and we applied them to existing EWTPs in Oregon and Nevada. Application of the indicators quantifies impacts and helps practitioners design water transaction portfolios that avoid unintended consequences and generate mutually beneficial outcomes among environmental, agricultural, and municipal interests.     

Metal microchannel lamination using surface mount adhesives for low-temperature heat exchangers

This paper reports the feasibility of using surface mount adhesives to produce low temperature microchannel arrays in a wide variety of metals. Sheet metal embossing and chemical etching processes have been used to produce sealing bosses that eliminate channel laminae, resulting in approximately 50% material savings over traditional methods. An assembly process using adhesive dispense and cure is outlined to produce leak-free devices. Optimal fill ratios were determined to be between 1.1 and 1.25. Bond strength investigation reveals robustness to surface conditions and a bond strength of 5.5–8.5 MPa using a 3X safety factor. Dimensional characterization reveals a two sigma (95%) post-bonded channel height tolerance under 10% after bonding. Patterning tolerance and surface roughness of the laminae faying surfaces were found to have a significant influence on the final post-bonded channel height. Leakage and burst pressure testing on several samples has established confidence that adhesive bonding can produce leak-free joints. Operating pressures up to 413 kPa have been satisfied, equating to tensile pressure on bond joints of 1.9 MPa. Higher operating pressures can be accommodated by increasing the bond area of devices.     

A CALIBRATION PROCEDURE USING TOPMODEL TO DETERMINE SUITABILITY FOR EVALUATING POTENTIAL CLIMATE CHANGE EFFECTS ON WATER YIELD1

ABSTRACT: An evaluation was conducted on three forested upland watersheds in the northeastern U.S. to test the suitability of TOPMODEL for predicting water yield over a wide range of climatic scenarios. The analysis provides insight of the usefulness of TOPMODEL as a predictive tool for future assessments of potential long-term changes in water yield as a result of changes in global climate. The evaluation was conducted by developing a calibration procedure to simulate a range of climatic extremes using historical temperature, precipitation, and streamfiow records for years having wet, average, and dry precipitation amounts from the Leading Ridge (Pennsylvania), Fernow (West Virginia), and Hubbard Brook (New Hampshire) Experimental Watersheds. This strategy was chosen to determine whether the model could be successfully calibrated over a broad range of soil moisture conditions with the assumption that this would be representative of the sensitivity necessary to predict changes in streamfiow under a variety of climate change scenarios. The model calibration was limited to a daily time step, yet performed reasonably well for each watershed. Model efficiency, a least squares measure of how well a model performs, averaged between 0.64 and 0.78. A simple test of the model whereby daily temperatures were increased by 1.7°C, resulted in annual water yield decreases of 4 to 15 percent on the three watersheds. Although these results makes the assumption that the model components adequately describe the system, this version of TOPMODEL is capable to predict water yield impacts given subtle changes in the temperature regime. This suggests that adequate representations of the effects of climate change on water yield for regional assessment purposes can be expected using the TOPMODEL concept.     

Integrating channel design and assessment methods based on sediment transport capacity in gravel bed streams

Natural channel design (NCD) and analytical channel design (ACD) are two competing approaches to stable channel design that share fundamental similarities in accounting for sediment transport processes with designs based on hybrid fluvial geomorphology and hydraulic engineering methods. In this paper, we highlight the linkage between ACD's capacity/supply ratio (CSR) and NCD's sediment capacity models (FLOWSED/POWERSED), illustrating how ACD and NCD have reached a point of convergent evolution within the stream restoration toolbox. We modified an existing CSR analytical spreadsheet tool which enabled us to predict relative channel stability using both conventional bed load transport equations and regional sediment regression curves. The stable channel design solutions based on measured data most closely matched the Parker (ACD) and/or Pagosa good/fair (NCD) relationships, which also showed the greatest CSR sensitivity in response to channel alterations. We found that CSR differences among the transport relationships became more extreme the further the design width deviated from the supply reach, suggesting that a stable upstream supply reach may serve as the best design analog. With this paper, we take a step toward resolving lingering controversy in the field of stream restoration, advancing the science and practice by reconciling key differences between ACD and NCD in the context of reach scale morphodynamics.     

Length polymorphism at the avpr1a locus is correlated with male reproductive behavior in a natural population of prairie voles (Microtus ochrogaster)

Laboratory studies have shown that vasopressin can influence sociosexual behavior through its action on the vasopressin 1a receptor (V1aR). There is substantial evidence that the length of a microsatellite in the gene (avpr1a) encoding for the V1aR can affect social attachment to females and paternal behavior in male prairie voles under laboratory conditions. However, previous field studies of prairie voles have failed to detect a strong effect of the length of a male’s avpr1a allele on their sociosexual behavior, but these studies are typically much shorter than the average prairie vole breeding lifespan. We examined the relationship between male avpr1a microsatellite allele length and sociosexual behavior in a natural population of prairie voles for 15 weeks, closer to the lifespan of prairie voles in nature. Contrary to predictions, we found that males with the longest avpr1a microsatellite alleles were significantly more likely to sire offspring with more than one female and to sire offspring that survived until trappable age than males with the shortest avpr1a microsatellite allele lengths. This relationship was the strongest for males with the longest tenure on the study site. As in previous field studies, we did not find evidence of a relationship between a male’s avpr1a genotype and any index of social behavior including male residency status or the number of females with which males associate. This is the first study to support the hypothesis that a male’s avpr1a genotype is a factor underlying variation in the genetic mating system of prairie voles under natural conditions.     

The evolution of large and small-scale structures in Kelvin–Helmholtz instabilities

To better understand the dynamics of Kelvin–Helmholtz instabilities in environmental flows, their evolution is investigated using direct numerical simulations (DNS). Two-dimensional DNS is used to examine the large-scale and small-scale structures of the instability at high Reynolds and Prandtl numbers that represent real environmental flows. The semi-analytical model of Corcos and Sherman (J Fluid Mech 73:241–264, 1976) is used to explain the physics of these simulations prior to saturation of the KH billow, and also provide a computationally efficient prediction of the vortex dynamics of the instability. The DNS results show that the large-scale structure of the billow does not depend on the Reynolds number for sufficiently high Reynolds numbers. The billow structure reveals a less straightforward dependence on the Prandtl number. Predictions of the model of Corcos and Sherman (J Fluid Mech 73:241–264, 1976) improve as Reynolds number and Prandtl number increase. The small-scale structure of the vorticity and density fields vary with both Reynolds and Prandtl numbers. Three-dimensional DNS of KH flows and their transition to turbulence are used to study small length scales. Based on the thickness of the braid, a simple method is introduced to estimate the Batchelor scale, which can be used as a guide for the resolution required for the direct numerical simulation of two and three-dimensional Kelvin–Helmholtz flow fields.     

Learned recognition of novel predator odour by convict cichlid embryos

Predation exerts tremendous selection pressure on all organisms. In this study, we exposed embryos of convict cichlids (Amatitlania siquia) twice daily to one of the following: (1) chemical alarm cues of damaged conspecifics + odour of a novel predator (Polypterus endlicheri), (2) chemical alarm cues of damaged conspecifics + water or (3) blank water. No chemical cues were presented after the eggs hatched. When the larvae were 9 days old (mean total length?=?5.7 mm), they were exposed to either predator odour or water. Those larvae that had been conditioned as embryos on alarm cues + predator odour showed a significant reduction in activity (i.e. anti-predator behavioural response) to predator odour relative to the other treatments. This is the first demonstration of acquired predator recognition by fish embryos.