Effects of various reaction parameters on solvolytical depolymerization of lignin in sub- and supercritical ethanol

Organosolv lignin was treated with ethanol at sub/supercritical temperatures (200, 275, and 350 °C) for conversion to low molecular phenols under different reaction times (20, 40, and 60 min), solvent-to-lignin ratios (50, 100, and 150 mL g⁻¹), and initial hydrogen gas pressures (2 and 3 MPa). Essential lignin-degraded products, oil (liquid), char (solid), and gas were obtained, and their yields were directly influenced by reaction conditions. In particular, concurrent reactions involving depolymerization and recondensation as well as further (secondary) decomposition were significantly accelerated with increasing temperature, leading to both lignin-derived phenols in the oil fraction and undesirable products (char and gas).     

Monitoring of environmental contaminants in raw bovine milk and estimates of dietary intakes of children in South Korea

Persistent organic pollutants (POPs) are ubiquitous residual contaminants in the environment and in the food chain. Milk is an important matrix for monitoring POP contamination. This study determined the concentrations of POPs including polybrominated diphenyl ethers (PBDEs), hexachlorobenzene (HCB), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (DL-PCBs) in raw bovine milk, and the data was used to estimate dietary intakes in South Korea. The average concentrations of PBDEs, HCB, PCDD/Fs, and DL-PCBs in raw milk were 0.29 ng g⁻¹ fat, 0.50 ng g⁻¹ fat, 0.27 pg TEQ g⁻¹ fat, and 0.33 pg TEQ g⁻¹ fat, respectively. No significant relationship was found between the concentrations of analytes and the regions sampled. The dietary intakes of PBDEs from the consumption of milk was calculated to be 0.26, 0.10, and 0.05 ng kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. The dietary intakes of HCB was calculated to be 0.44, 0.16, and 0.09 ng kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. The dietary intakes of PCDD/Fs and DL-PCBs was calculated to be 0.78, 0.29, and 0.16 pg TEQ kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. These results indicated that the residual levels of PBDEs, HCB, PCDD/Fs, and DL-PCBs in raw bovine milk were within safe levels.     

Reduction of toxicity of antimicrobial compounds by degradation processes using activated sludge,gamma radiation,and UV

The occurrence and persistence of pharmacologically active compounds in the environment has been an increasingly important issue. The objectives of this study were to investigate the decomposition of aqueous antimicrobial compounds using activated sludge, γ-irradiation, and UV treatment, and to evaluate the toxicity towards green algae, Pseudokirchneriella subcapitata, before and after treatment. Tetracycline (TCN), lincomycin (LMC) and sulfamethazine (SMZ) were used as target compounds. Gamma (γ)-irradiation showed the highest removal efficiency for all target compounds, while UV and activated sludge treatment showed compound-dependent removal efficiencies. TCN and SMZ were well degraded by all three treatment methods. However, LMC showed extremely low removal efficiency for UV and activated sludge treatments. Overall, the algal toxicity after degradation processes was significantly decreased, and was closely correlated to removal efficiency. However, in the case of γ-irradiated TCN, UV and activated sludge treated LMC as well as sludge treated SMZ, the observed toxicity was higher than expected, which indicates the substantial generation of byproducts or transformed compounds of a greater toxicity in the treated sample. Consequently, γ-radiation treatment could be an effective method for removal of recalcitrant compounds such as antibiotics.     

Effect of pH on surface characteristics of switchgrass-derived biochars produced by fast pyrolysis

Surface properties of switchgrass-derived biochars produced at fast pyrolysis temperatures of 450, 600 and 800 °C were characterized at different solution pHs in order to determine the structural and chemical changes of artificially-weathered biochars when incorporated into soil. As biochars were acidified from pH 7 to 3, crystalline minerals dissolved slowly releasing nutrients; however, residual minerals were still detected in biochars produced at higher pyrolysis temperatures after pH treatment. Moreover, the amount of exchangeable bases and other inorganic compounds released from the biochars increased when pH decreased. As minerals dissolved from the biochars, total surface area and pore volume were found to increase. Surface functional groups and water vapor adsorption capacity at 0.8 P/P_o also increased, whereas the potential CEC of biochars decreased due to the replacement of exchangeable sites by hydrogen ion. Therefore, during the aging process, it is predicted that soil-incorporated biochars will slowly release nutrients with changes in surface functionality and porosity, which are expected to enhance water holding capacity of soil and provide a beneficial habitat for microbial colonization.     

Aquatic toxicity of cartap and cypermethrin to different life stages of Daphnia magna and Oryzias latipes

Cartap and cypermethrin, which are among the most widely used pesticides in many countries, are considered safe because of their low mammalian toxicity and their low persistence in the environment. However, recent findings of endocrine-disrupting effects and developmental neurotoxicity have raised concerns about the potential ecological impacts of these pesticides. We evaluated the aquatic toxicity of cartap [S,S′-(2-dimethylaminotrimethylene) bis(thiocarbamate), unspecified hydrochloride] and cypermethrin [(RS)-alpha-cyano-3-phenoxybenzyl-(1RS,3RS,1RS,3SR)-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropane carboxylate], both individually and combined, on different life stages of the freshwater cladoceran Daphnia magna and a freshwater teleost, Japanese medaka (Oryzias latipes). The 96-hr Daphnia median effective concentrations (EC50s) for cartap and cypermethrin were 91.0 μ g/L and 0.00061 μ g/L, respectively. Rapid recovery of Daphnia was observed after short-term pulsed exposure to cartap and cypermethrin; there were no adverse effects on reproduction or survival 20 d after a 24 hr exposure to cartap up to 1240 μ g/L and cypermethrin up to 1.9 μ g/L. Chronic continuous exposure (for 21 d) of 7-d-old Daphnia to cypermethrin significantly reduced the intrinsic population growth rate in a concentration-dependent manner. However, because the intrinsic population growth rates were all above zero, populations did not decrease even at the highest experimental concentration of 200 ng/L. Exposure of Daphnia neonates (< 24 hr old) to cypermethrin for 21 d caused significant, sub-lethal reproduction-related problems, such as increased time to first brood, reduced brood size, and reduced total brood number, at 0.0002, 0.002, and 0.2 ng/L cypermethrin, but the intrinsic population growth rate was not significantly affected. Oryzias latipes was relatively more resistant to both pesticides. In particular, embryos appeared to be more resistant than juveniles or adults, which may be partly due to the protective role of the chorion. The incidence of larval fish deformity was significantly higher after a 96 hr exposure to as low as 250 μ g/L of cartap or 40 μ g/L of cypermethrin. The mixture of both compounds showed no synergistic toxicity. The extremely high acute-to-chronic ratio suggests that the standard acute lethal toxicity assessment might not reflect the true environmental hazards of these frequently used pesticides. Ecological hazard assessments of long-term low dose or pulsed exposures to cartap and cypermethrin may reveal more realistic consequences of these compounds in surface water.     

Oxidation of artificial sweetener sucralose by advanced oxidation processes: a review

Sucralose, a chlorinated carbohydrate, has shown its increased use as an artificial sweetener and persistently exists in wastewater treatment plant effluents and aquatic environment. This paper aims to review possible degradation of sucralose and related carbohydrates by biological, electrochemical, chemical, and advanced oxidation processes. Biodegradation of sucralose in waterworks did not occur significantly. Electrochemical oxidation of carbohydrates may be applied to seek degradation of sucralose. The kinetics of the oxidation of sucralose and the related carbohydrates by different oxidative species is compared. Free chlorine, ozone, and ferrate did not show any potential to degrade sucralose in water. Advanced oxidation processes, generating highly strong oxidizing agent hydroxyl radicals (^?OH), have demonstrated effectiveness in transforming sucralose in water. The mechanism of oxidation of sucralose by ^?OH is briefly discussed.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.     

Optimization of esterification of fatty acid rubber seed oil for methyl ester synthesis in a plug flow reactor

To date, non-food vegetable oil has been considered as the primary source for biodiesel production. Rubber seed oil has high acid value (34 mgKOH/g) and can be used for biodiesel synthesis. The purpose of this study was to investigate esterification of fatty acid, which derived from rubber seed oil, in a plug flow reactor system at high temperature and low methanol consumption. Response surface methodology was applied for design experiment and optimization of esterification reaction. Temperature, methanol consumption, and sulfuric acid were chosen as variables to examine their influence in a conversion to methyl ester. At 140°C, at 5:1 methanol to fatty acid ratio (by mole), H₂SO₄ 1.5 (%v/w), and space time 20 min, the conversion to methyl ester attained 98.2%. Fourier transform infrared spectroscopy (FTIR) and gas chromatography-Mass spectrometry (GC-MS) were used for analysis and to confirm the formation of methyl ester. Methyl ester was characterized for biodiesel fuel properties in accordance to ASTM standard.     

Integrating affective values to sustainable behaviour focused on Kansei engineering

Due to the changes and complications of emerging society, designers are required not only to know about their design values, but also understand the link between their design and the impacts on the users. This paper aims to show a Kansei focused proposition for sustainable behaviour. By investigating the relationship between Subjective Preference (Like-Dislike) and product evaluation, it shows how affective values, which are used in Kansei engineering researches, influence user’s preferences. In this study, it was considering (1) various factors of product (e.g. the view variation and blackness of products), and (2) Reality Sets (Uninominal–Binominal). Car-front-face, car-side, car-multi-aspect (as Uninominal Reality Sets) and combinations of car front and side (as Binominal Reality Sets) were used as stimuli. The experiment consists of item screening and product evaluation. Subjects were participated in both. The aim of item screening was at selecting subjectively preferred/non-preferred images. Images, which were screened through item screening, were reconciliated per subject. The aim of product evaluation was at investigating if Subjective Preference has related to product evaluation. Semantic Differential method was used as product evaluation method. Evaluation values were preference, aesthetic and pleasure. The findings shows: (1) Subjective Preference is related to product evaluation independently in Uninominal Reality Sets, whereas Subjective Preference is related to product evaluation dependently in Binominal Reality Sets (2) partial preferred images influence product evaluation in Uninominal Reality Sets, whereas Binominal Reality Sets do not influence it.