Traffic noise, work noise and cardiovascular risk factors: The Caerphilly and Speedwell collaborative heart disease studies

As part of two large heart surveys, associations between traffic noise exposure and cardiovascular risk factors were studied. The Caerphilly sample (small town, total sample) consisted of 2512 men aged 45 to 59 years and the Speedwell sample (suburb of a major city, random sample) of 2030 men of same age group. Both studies have a prospective design; cross-sectional results are presented here. Acoustic measurements were carried out in both areas. Among the possible risk factors for ischaemic heart disease studied were blood pressure, blood coagulation, blood lipids and other biochemical factors. Statistically significant noise effects were detected for systolic blood pressure, total cholesterol, HDL cholesterol, total triglycerides, blood viscosity, platelet count and glucose level, although not all of these were consistent with noise being a risk factor for heart disease. In a subsample, the additional influence of work noise as determined by noise dosimetry was studied in 255 men, taking the use of ear protection into account. The associations between traffic noise and risk factors were more pronounced in men who also were exposed to high work noise levels.     

Economic and environmental value stream map (E2VSM) simulation for multi-product manufacturing systems

Value stream mapping (VSM) is a well-accepted tool within lean manufacturing concept which is often used for analysing and designing the flow of materials and information required to manufacture a product. However, the analysis is static and single product oriented, which fails to cope with either the variation of production plan or a multi-product environment. In addition, the environmental impact of a manufacturing system is highly associated with the dynamic consumption of energy and resources. Despite the recent integration of VSM with simulation or environmental studies (in the domain of energy efficiency), still neglected is the dynamic assessment of all the resources involved in a multi-product production environment. This paper presents a methodology for modelling multi-product manufacturing systems with dynamic material, energy and information flows with the aim to generate economic and environmental value stream maps (E²VSM). The proposed methodology is validated with an industrial case.     

Analysis of microcystins in cyanobacteria blooms and surface water samples from Meiliang Bay,Taihu Lake,China

Taihu Lake is the third largest freshwater lake in China. In recent years, the water pollution of cyanobacteria blooms has become a severe problem in this area. Microcystins (MCs) are an important group of toxic compounds mainly produced by some cyanobacteria species and have both acute and chronic hepatotoxic effects on animals and humans. This paper presents the first data on the identification and detection of MCs in both natural occurring cyanobacteria blooms and surface water samples (0-0.5 m), collected from Meiliang Bay, Taihu Lake, China. A conventional method for extraction and isolation of MCs from cyanobacteria blooms was applied. High-performance liquid chromatography (HPLC) analysis showed that the main toxic component in the cyanobacteria materials was MC-LR. The monoclonal antibody (mAb) against MC-LR produced by hybridoma technique was employed for direct competitive ELISA to detect the concentrations of MCs in bloom and water samples collected in 2001. The results not only revealed the presence of MCs but also temporal variations of MCs levels of three sampling stations in Meiliang Bay in 1 year. It is obvious that the MC contents were relatively higher during warm months and related with the status of eutrophication. Our study indicates the threat associated with MCs in water body of Taihu Lake. To prevent the MCs potential hazard on public health in this area, some necessary measures of monitoring and control of growth of cyanobacteria are urgently needed.     

Derivation of ecotoxicity thresholds for uranium

Assessment of the risk of impact from most radionuclides is based on the total radiological dose rate to the organism of concern. However, for uranium (U) there can be greater risk from chemical toxicity than radiological toxicity (depending on the isotopic composition). Chemical ecotoxicity of U is dependent on several environmental parameters. The most important are carbonate content, because of the formation of soluble carbonate complexes, and divalent cation content (Ca++ and Mg++), because of their competitive interaction with the uranyl ion (UO2++). This study summarizes the literature available to set PNECs (predicted no-effect concentrations) for chemical toxicity of U to non-human biota. The corresponding radiological doses were estimated, and as expected chemical toxicity proved to be the greater concern. There were limited data from some types of biota; however, PNECs for the types of biota of interest were as follows: terrestrial plants--250 mg U kg(-1) dry soil; other soil biota--100 mg U kg(-1) dry soil; freshwater plants--0.005 mg U L(-1) water; freshwater invertebrates--0.005 mg U L(-1) water; freshwater benthos--100 mg U kg(-1) dry sediment; freshwater fish at water hardnesses of: <10 mg CaCO3 L(-1) (very soft water)--0.4 mg U L(-1) water; 10-100 mg CaCO3 L(-1) (soft water)--2.8 mg U L(-1) water; and >100 mg CaCO3 L(-1) (hard water)--23 mg U L(-1) water; or as a function of hardness--0.26 (hardness as mg CaCO3 L(-1); mammals--0.1 mg U kg(-1) body weight d(-1).     

Nematode species at risk--a metric to assess pollution in soft sediments of freshwaters

Soft sediments are often highly polluted as many of the toxic chemicals introduced into surface waters bind to settling particles. The resulting accumulation of pollutants in the sediments poses a risk for benthic communities. However, pollution induced changes in benthic communities have been difficult to determine when using macro-invertebrates as bioindicators, as these organisms are often absent in soft sediment. The present study therefore examined the ability of meiofaunal organisms, specifically, nematodes, to assess the ecological status of soft sediments. Over a 9-year period, nematode communities present in sediments collected from large rivers and lake Constance in Germany were studied. These sediments showed a large range of physico-chemical properties and anthropogenic contamination. After the degree of metal and organic contamination was translated into ecotoxicologically more relevant toxic units (TUs), multivariate methods were used to classify nematode taxa in species at risk (NemaSPEAR) or not at risk (NemaSPE(not)AR). This approach clearly distinguished the influence of sediment texture from that of the toxic potential of the samples and thus allowed classification of the nematode species according to their sensitivity to or tolerance of toxic stress. Two indices, expressing the proportion of species at risk within a sample (NemaSPEAR[%](metal), NemaSPEAR[%](organic)), were calculated from independent data sets obtained in field and experimental studies and showed good correlations with the toxic potential (field data) or chemical concentrations (microcosm data). NemaSPEAR[%] indices for metal and organic pollution were therefore judged to be suitable for assessing the impact of chemical contamination of freshwater soft sediments.     

Anthropogenic 236U at Rocky Flats,Ashtabula river harbor,and Mersey estuary: three case studies by sector inductively coupled plasma mass spectrometry

236U (t(1/2)=2.3 x 10(7) y) is formed as a result of thermal neutron capture by (235)U. In naturally occurring U ores, where a high neutron flux is present from spontaneous fission of (238)U, (236)U/(238)U atom ratios are approximately 10(-4) ppm. In the natural Earth's crust, unaffected by nuclear fallout, these ratios are expected to be on the order of 10(-8) ppm. Reactor-irradiated U, however, exhibits high (236)U/(238)U atom ratios approaching 10(4) ppm. As a result, the presence of very small quantities of reactor-irradiated U will significantly enhance the "background" (236)U/(238)U atom ratio. When sufficiently elevated (236)U/(238)U ratios are present, the determination of (236)U/(238)U by rapid inductively coupled plasma mass spectrometric (ICPMS) methods is attractive. We have used sector ICPMS at medium resolving power (R=3440) to measure (236)U/(238)U atom ratios with a determination limit of 0.2 ppm. The limiting factors in the measurement are the (235)U(1)H(+) isobar and background signal at m/z 236 arising from the (238)U(+) peak tail. Based upon the analysis of replicates and considerations of possible systematic errors, uncertainties of +/-5% are found for (236)U/(238)U atom ratios of 1-100 ppm. This procedure has been demonstrated in studies of anthropogenic (236)U in the environment at three locations: (a) offsite soils from the vicinity of the Rocky Flats Environmental Technology site (Golden, Colorado, USA); (b) sediments from the Ashtabula River (Ohio, USA); and (c) sediments from the Mersey estuary (Liverpool, UK). In each of these three locations, definite plumes of elevated (236)U/(238)U are identified and characterized. Maximum (236)U/(238)U atom ratios observed in RFETS-vicinity soils, the Ashtabula River, and the Mersey Estuary are 2.8, 140, and 4.4 ppm, respectively.     

Mutagenic and carcinogenic potency of extracts from diesel related environmental emissions: Simultaneous morphological transformation and mutagenesis in BALB/c 3t3 cells

Particulate extracts from six different environmental emission sources were assayed for genotoxic activity in mouse BALB/c 3T3 clone A31-1 cells. All compounds were tested simultaneously for both transforming and mutagenic (induction of ouabain-resistance) potential with and without exogenous metabolic activation in the form of a 9000 × g postmitochondrial hepatic supernatant fraction from Aroclor-1254 induced Fischer 344 rats. Dichloromethane particulate extracts from the exhaust of two light duty diesel engines (Oldsmobile and Nissan), one heavy duty diesel engine (Caterpillar) and one late model gasoline engine (Mustang II) were assayed in an identical manner to particulate extracts from the emissions of a roofing tar pot and a coke oven. No clear dose-dependent responses were observed, but several of the samples showed significant transforming and mutagenic activity. A qualitative ranking system showed the activity of these particulate extracts for either mutagenesis or transformation was: coke oven = Mustang II gasoline engine > Nissan diesel engine > roofing tar. Particulate extracts from the Oldsmobile diesel engine and the Caterpillar diesel engine showed essentially no activity.     

Effects of atrazine and nicosulfuron on freshwater microalgae

Growth modifications caused by various concentrations of atrazine and nicosulfuron were monitored in closed and continuous culture of Chlorella vulgaris (chlorophyta), Navicula accommoda (diatomophyta), and Oscillatoria limnetica (cyanophyta). The concentration at which algal growth rate was reduced twofold (EC50) was determined in the three species for both herbicides. Comparatively, the two toxicants were applied at 10 microg/l level in microcosms inoculated with natural phytoplankton from Lake Geneva. The relative abundances of major phytoplanktonic species were measured by algal cell count at the beginning and at the end of each experiment. Atrazine and nicosulfuron have different targets in plant metabolism, respectively, photosystem II (PSII) and acetolactate synthase (ALS), and the expected effects were different. Generally, the cultured phytoplankton exhibited various sensitivities, depending on species or herbicide. In the microcosms, the major taxa of natural phytoplanktonic samples exhibited various patterns, from acute toxicity to growth enhancement. For example, the diatoms inside the community were not affected by atrazine and nicosulfuron, except for Stephanodiscus minutulus that was sensitive to both, and Asterionella/formosa that was sensitive only to nicosulfuron. The specific physiology and the relationships among the phytoplanktonic communities have to be carefully considered when one would try to predict the extent of herbicide action on natural phytoplankton using in vitro tests. There is a need to test the toxic effect on various cultured strains, representative of most of the taxonomic composition of natural communities, to take into account the wide range of sensitivities and reaction to herbicide contamination. But this is not enough to give a solid frame when transposing the results to the field, and the use of more ecologically relevant systems is recommended.     

Environmental radiological impact associated with non-uranium mining industries: a proposal for screening criteria

Niobium, phosphate, coal and gold mining facilities have been selected as case studies with the aim of identifying possible sources of radiological impact during and after cessation of industrial operations. The results have shown that acid drainage, as well as chemical processing of mineral ores, constitute relevant impact indicators for present-day and future scenarios. The possible use of solid wastes abandoned at the end of the operations represents a long-term radiological concern. Therefore, it is necessary that Brazilian legislation for environmental licensing be revised taking into account the potential environmental and radiological impacts caused by these industries and establishing remedial procedures for waste storage areas in the existing sites. The indicators developed and procedures carried out can be used in screening for decisions on the adoption of regulatory requirements for practices at such types of installations.