Constructed wetlands may lower inorganic nutrient inputs but enhance DOC loadings into a drinking water reservoir in North Wales

Environmental Science and Pollution Research - The objective of this study was to monitor a newly constructed wetland (CW) in north Wales, UK, to assess whether it contributes to an improvement in...     

Economic and environmental value stream map (E2VSM) simulation for multi-product manufacturing systems

Value stream mapping (VSM) is a well-accepted tool within lean manufacturing concept which is often used for analysing and designing the flow of materials and information required to manufacture a product. However, the analysis is static and single product oriented, which fails to cope with either the variation of production plan or a multi-product environment. In addition, the environmental impact of a manufacturing system is highly associated with the dynamic consumption of energy and resources. Despite the recent integration of VSM with simulation or environmental studies (in the domain of energy efficiency), still neglected is the dynamic assessment of all the resources involved in a multi-product production environment. This paper presents a methodology for modelling multi-product manufacturing systems with dynamic material, energy and information flows with the aim to generate economic and environmental value stream maps (E²VSM). The proposed methodology is validated with an industrial case.     

Common buzzards (Buteo buteo) bio-indicators of heavy metals pollution in Sicily (Italy)

The aim of this study was to evaluate the accumulation of toxic (As, Cd and Pb) and essential (Cu, Mn and Zn) metals in samples (feathers, liver, kidney, lung, intestine and muscle) of common buzzards (Buteo buteo) from Sicily, used as bio-indicators for monitoring environmental metals pollution. All samples of buzzards were collected at the “Recovery Center of Wild Fauna” of Palermo, through the Zooprophilactic Institute. The quantitative determinations of metals were carried out using an atomic absorbtion spectrophotometer (AAS). The results obtained showed the presence of metals in all samples analyzed. For toxic metals the highest levels of Pb and As were found in liver and those of Cd in kidney; for essential metals Zn levels were higher than Cu and Mn in all tissues analyzed. Significant differences are observed in metal levels between female and male and juvenile and adult bird samples.Highest metal levels found in liver, kidney and muscle can be considered indicative of chronic exposure to metals while the presence of metals in feathers can be consequential to storing and elimination processes. The results obtained suggest that common buzzards (Buteo buteo) may be very useful as bio-indicators for monitoring environmental pollution.     

Radionuclide transfer to animal products: revised recommended transfer coefficient values

A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as ‘TRS 364’. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 ‘expected’ values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.     

Review of Russian language studies on radionuclide behaviour in agricultural animals: 3. Transfer to muscle

Over 150 publications reporting studies conducted in the former USSR were reviewed to provide transfer coefficients (F_f) to the muscle of domestic animals from experiments using chronic administration, often for long timescales in large scale experiments. Only a few of these studies were made available in the English language literature or taken into account in international reviews. The values derived have been compared with expected values reported by the IAEA's Handbook of parameter values for the prediction of radionuclide transfer in temperate environments (TRS 364) where possible. The information presented here has been used in the current updating of parameters recommended for environmental assessments by the IAEA. Many of the reported values are for Sr due to the Mayak accident and Cs due to the Chernobyl accident. Nevertheless, the reported data for a wide range of radionuclides, in particular for Ru, Sb, and Zn markedly improve the extent of available data.     

Geopolymerisation of silt generated from construction and demolition waste washing plants

Recycling plants that size, sort and wash construction and demolition waste can produce high quality aggregate. However, they also produce up to 80ton per hour of filter cake waste containing fine (<63mum) silt particles that is classified as inert waste and normally landfilled. This research investigated the potential to form geopolymers containing silt, which would allow this problematic waste to be beneficially reused as aggregate. This would significantly improve the economic viability of recycling plants that wash wastes. Silt filter cakes have been collected from a number of aggregate washing plants operating in the UK. These were found to contain similar aluminosilicate crystalline phases. Geopolymer samples were produced using silt and silt mixed with either metakaolin or pulverised fuel ash (PFA). Silt geopolymers cured at room temperature had average 7-day compressive strengths of 18.7MPa, while partial substitution of silt by metakaolin or PFA increased average compressive strengths to 30.5 and 21.9MPa, respectively. Curing specimens for 24h at 105 degrees C resulted in a compressive strength of 39.7MPa and microstructural analysis confirmed the formation of dense materials. These strengths are in excess of those required for materials to be used as aggregate, particularly in unbound applications. The implications of this research for the management of waste silt at construction and demolition waste washing plants are discussed.     

Bench-scale composting of source-separated human faeces for sanitation

In urine-diverting toilets, urine and faeces are collected separately so that nutrient content can be recycled unmixed. Faeces should be sanitized before use in agriculture fields due to the presence of possible enteric pathogens. Composting of human faeces with food waste was evaluated as a possible method for this treatment. Temperatures were monitored in three 78-L wooden compost reactors fed with faeces-to-food waste substrates (F:FW) in wet weight ratios of 1:0, 3:1 and 1:1, which were observed for approximately 20 days. To achieve temperatures higher than 15 degrees C above ambient, insulation was required for the reactors. Use of 25-mm thick styrofoam insulation around the entire exterior of the compost reactors and turning of the compost twice a week resulted in sanitizing temperatures (>or=50 degrees C) to be maintained for 8 days in the F:FW=1:1 compost and for 4 days in the F:FW=3:1 compost. In these composts, a reduction of >3 log(10) for E. coli and >4 log(10) for Enterococcus spp. was achieved. The F:FW=1:0 compost, which did not maintain >or=50 degrees C for a sufficiently long period, was not sanitized, as the counts of E. coli and Enterococcus spp. increased between days 11 and 15. This research provides useful information on the design and operation of family-size compost units for the treatment of source-separated faeces and starchy food residues, most likely available amongst the less affluent rural/urban society in Uganda.     

Assessing coastal waters of American Samoa: territory-wide water quality data provide a critical “big-picture” view for this tropical archipelago

The coastal waters of American Samoa’s five high islands (Tutuila, Aunu’u, Ofu, Olosega, and Ta’u) were surveyed in 2004 using a probabilistic design. Water quality data were collected from the near-shore coastal habitat, defined as all near-shore coastal waters including embayments, extending out to 1/4 mile off-shore. Hydrography and water column samples were collected, and water quality data were compared to the Territorial water quality standards for pH, dissolved oxygen (DO), Enterococcus, chlorophyll a, water clarity, total nitrogen, and total phosphorus. All station measurements for pH, DO, and Enterococcus satisfied the local water quality standards, although some fraction of the Territory could not be assessed for either DO or Enterococcus. With respect to chlorophyll a, 66 ± 18% of Territory coastal waters complied with the standard, while 34 ± 18% failed to comply with the standard. For water clarity, 54 ± 18% of the Territorial waters complied with the standard while 42 ± 7% failed to comply. Territorial waters satisfied the standards for total nitrogen and phosphorus 72 ± 17% and 92 ± 10%, respectively. These data provide the first “big-picture” view of water quality in the near shore region around the high islands of American Samoa. While the picture is encouraging, these data suggest emerging water quality concerns.