Hydrogen and transportation: alternative scenarios

If hydrogen (H₂) is to significantly reduce greenhouse gas emissions and oil use, it needs to displace conventional transport fuels and be produced in ways that do not generate significant greenhouse gas emissions. This paper analyses alternative ways H₂ can be produced, transported and used to achieve these goals. Several H₂ scenarios are developed and compared to each other. In addition, other technology options to achieve these goals are analyzed. A full fuel cycle analysis is used to compare the energy use and carbon (C) emissions of different fuel and vehicle strategies. Fuel and vehicle costs are presented as well as cost-effectiveness estimates. Lowest hydrogen fuel costs are achieved using fossil fuels with carbon capture and storage. The fuel supply cost for a H₂ fuel cell car would be close to those for an advanced gasoline car, once a large-scale supply system has been established. Biomass, wind, nuclear and solar sources are estimated to be considerably more expensive. However fuel cells cost much more than combustion engines. When vehicle costs are considered, climate policy incentives are probably insufficient to achieve a switch to H₂. The carbon dioxide (CO₂) mitigation cost would amount to several hundred US$ per ton of CO₂. Energy security goals and the eventual need to stabilize greenhouse gas concentrations could be sufficient. Nonetheless, substantial development of related technologies, such as C capture and storage will be needed. Significant H₂ use will also require substantial market intervention during a transition period when there are too few vehicles to motivate widely available H₂ refueling.

Biosorption for the recovery and analysis of rare earth elements and platinum group metals from real samples. A review

Environmental Chemistry Letters - The increasing demand of rare earth elements and platinum group metals requires alternative approaches for their recycling from waste. Decades of fundamental...     

Statistical Evaluation of Variables Affecting Occurrence of Hydrocarbons in Aquifers Used for Public Supply,California

The variables affecting the occurrence of hydrocarbons in aquifers used for public supply in California were assessed based on statistical evaluation of three large statewide datasets; gasoline oxygenates also were analyzed for comparison with hydrocarbons. Benzene is the most frequently detected (1.7%) compound among 17 hydrocarbons analyzed at generally low concentrations (median detected concentration 0.024 μg/l) in groundwater used for public supply in California; methyl tert‐butyl ether (MTBE) is the most frequently detected (5.8%) compound among seven oxygenates analyzed (median detected concentration 0.1 μg/l). At aquifer depths used for public supply, hydrocarbons and MTBE rarely co‐occur and are generally related to different variables; in shallower groundwater, co‐occurrence is more frequent and there are similar relations to the density or proximity of potential sources. Benzene concentrations are most strongly correlated with reducing conditions, regardless of groundwater age and depth. Multiple lines of evidence indicate that benzene and other hydrocarbons detected in old, deep, and/or brackish groundwater result from geogenic sources of oil and gas. However, in recently recharged (since ~1950), generally shallower groundwater, higher concentrations and detection frequencies of benzene and hydrocarbons were associated with a greater proportion of commercial land use surrounding the well, likely reflecting effects of anthropogenic sources, particularly in combination with reducing conditions.     

Preliminary survey of pharmaceutical residues in some important Romanian rivers

A number of important rivers of Romania were investigated for pharmaceutical and antifungal residues. In a post target approach analysis, a single-stage, high-resolution mass spectrometry was successfully applied for the screening of 43 pharmaceuticals and fungicides in water, using U-HPLC-Exactive Orbitrap MS at 50,000 full width at half maximum resolution. Detection was based on accurate masses and retention times. The study confirmed the presence of pharmaceuticals and antifungals such as diclofenac, sulfamethoxazole, carbamazepine, trimethoprim, thiabendazole, and clotrimazole, in water. Diclofenac and carbamazepine were the most frequently detected (eight samples); concentrations ranged from 5 to 50 ng L^?1. Low concentrations of griseofulvin were detected in the Prut River. Further monitoring studies should be carried out in order to fill the gaps of knowledge concerning the presence of pharmaceutical residues in Romanian water environment and to improve public understanding regarding the environmental risk of pharmaceutical contamination.     

Status of facilities for fire safety in hotels

This paper presents the results of a research work which analysed the status of fire precaution systems in hotels in Spain.Our field research involved visits to a total of 146 hotels during 2004. In order to examine the fire safety of these facilities we made use of the official checklist of the Spanish administrative body competent on the matter. The checklist monitors documentary and technical requirements as stated by the current fire protection regulations for buildings. As far as fire precaution systems are concerned, most of the defects detected had to do with either documentary issues (for example, absence of a technical installation project or certificates of compulsory maintenance contracts for the equipment) or technical issues, such as the absence of smoke detection and alarm devices, defective signage or difficult access to firefighting equipment (fire extinguishers and hydrants). Beach hotels present a higher safety level than city hotels. The lowest safety standards are found in isolated hotels, i.e., neither beach nor city hotels, usually in small towns or away from centres of population. Of all the hotels visited, the safety level was also higher in those subject to the regulations inspiring the checklist.     

Communal roosting sites are potential ecological traps: experimental evidence in a Neotropical harvestman

Situations in which animals preferentially settle in low-quality habitat are referred to as ecological traps, and species that aggregate in response to conspecific cues, such as scent marks, that persist after the animals leave the area may be especially vulnerable. We tested this hypothesis on harvestmen (Prionostemma sp.) that roost communally in the rainforest understory. Based on evidence that these animals preferentially settle in sites marked with conspecific scent, we predicted that established aggregation sites would continue to attract new recruits even if the animals roosting there perished. To test this prediction, we simulated intense predation by repeatedly removing all individuals from 10 established roosts, and indeed, these sites continued to attract new harvestmen. A more likely reason for an established roost to become unsuitable is a loss of overstory canopy cover caused by treefalls. To investigate this scenario, without felling trees, we established 16 new communal roosts by translocating harvestmen into previously unused sites. Half the release sites were located in intact forest, and half were located in treefall gaps, but canopy cover had no significant effect on the recruitment rate. These results support the inference that communal roost sites are potential ecological traps for species that aggregate in response to conspecific scent.     

Fractionation of phosphorus biowastes: characterisation and environmental risk

Phosphorus (P) fertilizer is essential for food production and is a limiting factor in crop yields. However, the role of P in the eutrophication of surface water has long been recognised. During recent years, the input of P from agriculture to surface waters has increased and has been the focus for strategies aimed at mitigating diffuse P losses. As not all forms of P have the same availability, it is important to know the main forms of phosphorus in biowastes, and hence to develop fractionation schemes. The standards, measurements, and testing (SMT) procedure for phosphorus fractionation in freshwater sediments, developed within the framework of the Standards, Measurements, and Testing Program of the European Commission, was applied to 15 biowastes used frequently in agriculture, to obtain total P, inorganic and organic P, apatite P, and non-apatite inorganic P. The Hedley method was applied to determine the water-soluble phosphorus (WSP) in all the biowastes. In addition, the aluminium, calcium, and iron concentrations were quantified and related to the WSP. The results confirm the applicability of the SMT protocol to all kinds of waste usually applied in agriculture. The SMT protocol revealed the existence of large amounts of inorganic P and non-apatite inorganic P, the most-available forms of P for all the biowastes. The comparison of the data for total P (SMT protocol) and WSP (Huang protocol) does not show a good linear relationship between these parameters. Instead, the relationship between [aluminium+calcium+iron] and WSP is a better indication of the availability of P.