长三角区域城市间一次污染跨界影响

长三角城市群作为我国三大经济圈之一,高强度的能源消耗致使区域大气污染问题十分突出.为了定量弄清城市之间一次污染传输情况,以长三角15个城市的污染排放清单、MM5气象场为基础,利用CALPUFF空气质量模型,模拟测算了长三角区域内城市间一次污染跨界输送影响.结果显示,环太湖地区的上海、苏州、无锡和常州等地由于自身排放强度...     

含信号控制人行横道的街道峡谷污染物扩散三维数值模拟

耦合微观交通仿真和机动车尾气排放模型,分别对含信号控制人行横道和不含信号控制人行横道的街道峡谷污染物排放进行计算,并以此为排放源,采用k-ε两方程模型与组分输运方程对风向与街道垂直时的污染扩散情况进行了三维数值模拟.结果表明,k-ε两方程模型与组分输运方程可以较好地模拟风向与街道垂直时三维街道峡谷内的污染物扩散情况.峡...     

搅拌-序批式活性污泥反应器(WSBR)中好氧颗粒污泥的特性研究

为研究搅拌-序批式活性污泥反应器(WSBR)中好氧颗粒污泥的特性,利用WSBR反应器与传统SBR反应器对好氧活性污泥颗粒化的过程进行了比较.结果表明,在添加同量的聚炳烯酰胺(PAM)条件下,具有合理二次流场的WSBR反应器在4d就可见好氧颗粒污泥,而SBR反应器则在第10d才出现好氧颗粒污泥,且WSBR反应器中好氧颗粒...     

粗粒子气溶胶远距离输送造成华南严重空气污染的分析

2009年4月末,发生了一次罕见的粗粒子气溶胶远距离输送造成华南地区出现严重的空气污染事件,其特征主要是气溶胶质量浓度超标,而能见度没有明显恶化,对这次空气污染事件进行分析的结果表明.在过程中,粗细粒子质量比(PM2.5/PM10)有明显的3次下降,最低达到0.3,即PM2.5仅占PM10的30%,这与珠江三角洲地区通常以细粒子为主的污染特征有很大不同,反映了外来粗粒子的侵入特征.长江流域浮尘天气的沙尘粒子变性后,长距离输送污染物叠加本地污染物,造成这次严重空气污染事件.     

后寨河流域岩溶含水层脆弱性及其对土地利用方式的响应

由于强烈的溶蚀作用,岩溶地区溶蚀裂隙、管道等高度发育,并相互贯通,形成岩溶区特有的地下、地表“双层空间”结构体系,地下空间成为地下水存储和运移的重要场所。岩溶地区由于土层浅薄或缺失,并且溶蚀裂隙、管道、落水洞、竖井等高度发育,使含水层更易受地表状况的影响,土地利用/覆被变化在很大程度上影响着地下水的水质、水量,岩溶水质的变化能集中反映人类活动胁迫下岩溶含水层脆弱性程度的增加。以典型岩溶单元--贵州普定后寨河流域为例,分析了流域水文地质背景下的岩溶含水层本质脆弱性,结合流域地下河水近20年的水化学资料,分析了含水层脆弱性对土地利用变化的响应。结果显示：土地利用/覆被变化、农业活动、城镇建设及居民活动都对地下水质变化有明显影响。因此,调整土地利用结构,恢复岩溶植被,改善生态环境是保护和改善岩溶水资源的重要途径。     

曝气调节-水解酸化-生物接触氧化工艺处理城镇生活污水

介绍了采用曝气调节-水解酸化-两级生物接触氧化为主的工艺处理城镇生活污水的工程实例。经过调试运行,污水处理系统运行稳定,工艺运行成本低,污染物处理效果好。其中COD、BOD5、SS与氨氮去除率均在85%以上,出水水质优于GB 8978-1996《污水综合排放标准》一级排放标准。     

Roles of manganese oxides in degradation of phenol under UV-Vis irradiation: Adsorption, oxidation, and photocatalysis

The effect of crystal structure on photocatalytic activities of manganese oxides and underlying reaction mechanism were investigated.     

Synthesis and scale inhibitor performance of polyaspartic acid

Polyaspartic acid (PASP) has been extensively studied in recent years as a green scale inhibitor. PASP was synthesized by thermal polycondensation of maleic anhydride and ammonium carbonate in this study. The optimal polycondensation reaction conditions were the raw material (maleic anhydride and ammonium carbonate) molar ratio of 1.0:1.2, the polymerization temperature of 180°C and reaction time of 2.0 hr. The results showed that PASP exhibits very good scale inhibiting performance. The inhibition rate was 95% for calcium carbonate and 90% for calcium sulfate by the application of 5 mg/L PASP.     

钢铁企业固体废弃物资源化利用浅析

固体废物做到资源化即通过综合利用,使有利用价值的固体废物变废为宝,实现资源的再循环利用,是固体废物污染控制一直努力方向。钢铁联合企业生产过程中产生的固体废弃物量大、面广,如对其进行资源化利用不仅可获得好的效益,同时也解决了环保难题。通过借鉴国内外钢铁企业固体废弃物资源化利用成功技术,使我们在开展环境影响评价工作中对钢铁企业固废的资源化利用提出一些切实可行的控制措施。     

Comparison of quartz sand, anthracite, shale and biological ceramsite for adsorptive removal of phosphorus from aqueous solution

The choice of substrates with high phosphorus adsorption capacity is vital for sustainable phosphorus removal from waste water in constructed wetlands. In this study, four substrates were used： quartz sand, anthracite, shale and biological ceramsite. These substrate samples were characterized by X- ray diffractometry and scanning electron microscopy studies for their mineral components （chemical components） and surface characteristics. The dynamic experimental results revealed the following ranking order for total phosphorus （TP） removal efficiency： anthracite 〉 biological ceramsite 〉 shale 〉 quartz sand. The adsorptive removal capacities for TP using anthracite, biological ceramsite, shale and quartz sand were 85.87, 81.44, 59.65, and 55.98 mg/kg, respectively. Phosphorus desorption was also studied to analyze the substrates＇ adsorption efficiency in wastewater treatment as well as the substrates＇ ability to be reused for treatment. It was noted that the removal performance for the different forms of phosphorus was dependent on the nature of the substrate and the adsorption mechanism. A comparative analysis showed that the removal of particulate phosphorus was much easier using shale. Whereas anthracite had the highest soluble reactive phosphorus （SRP） adsorptive capacity, biological ceramsite had the highest dissolved organic phosphorus （DOP） removal capacity. Phosphorus removal by shale and biological ceramsite was mainly through chemical adsorption, precipitation or biological adsorption. On the other hand, phosphorus removal through physical adsorption （electrostatic attraction or ion exchange） was dominant in anthracite and quartz sand.