Morphological and molecular comparisons of dominant amphioxus populations in the China Seas

The amphioxi Branchiostoma belcheri, Branchiostoma japonicum and Branchiostoma malayanum are recorded from the coast of China Seas. Six amphioxus populations comprising three Branchiostoma species collected from Hong Kong (southern China), Xiamen (south-eastern China) and Qingdao (northern China) were compared at the morphological and molecular levels. Phylogenetic separations among the species and geographic populations were evaluated by the analysis of 12S ribosomal RNA gene sequences and amplified fragment length polymorphism (AFLP) markers. From morphological characters, B. belcheri is more closely related to B. japonicum than to B. malayanum. However, phylogenetic affinities indicated by both 12S rRNA gene sequences and AFLP analysis showed a more recent phylogenetic splitting of B. belcheri and B. malayanum than that of B. belcheri and B. japonicum. In the AFLP similarity tree, geographic populations of B. japonicum were clustered into different clades. The AFLP data also showed that both B. belcheri and B. japonicum populations in Hong Kong have the highest levels of within-population genetic diversity as compared to that in Xiamen and Qingdao, suggesting that genetic diversity of Branchiostoma decreases from low to high latitudes. Results of hierarchical analysis of molecular variance (AMOVA) also revealed a high level of genetic diversity either for the three B. japonicum populations or the two B. belcheri populations in China Seas. However, genetic variation among the three B. japonicum populations was insignificant, indicating that these populations are genetically connected.     

Assessment of contamination by percolation of septic tank effluent through natural and amended soils

Fly ash has been found to be a potential material for the treatment of municipal and industrial wastewater, and may be useful in the treatment of septic tank effluent. Laboratory columns (30 cm) were used to determine the sorption capacity and hydraulic properties of lagoon fly ash, loamy sand, sand, and sand amended by lagoon fly ash (30 and 60%) and red mud gypsum (20%). The removal of chemical oxygen demand (COD) was high in all column effluents (71-93%). Extent of nitrification was high in Spearwood sand, Merribrook loamy sand and 20% red mud gypsum amended Spearwood sand. However, actual removal of nitrogen (N) was high in columns containing lagoon fly ash. Unamended Spearwood sand possessed only minimal capacity for P sorption. Merribrook loamy sand and red mud gypsum amended sand affected complete P removal throughout the study period of 12 weeks. Significant P leakage occurred from lagoon fly ash amended sand columns following 6-10 weeks of operation. Neither lagoon fly ash nor red mud gypsum caused any studied heavy metal contamination including manganese (Mn), lead (Pb), zinc (Zn), cadmium (Cd) and chromium (Cr) of effluent. It can be concluded that Merribrook loamy sand is better natural soil than Spearwood sand as a filter medium. The addition of lagoon fly ash enhanced the removal of P in Spearwood sand but the efficiency was lower than with red mud gypsum amendment.     

Sub-lethal effects of heavy metals on activated sludge microorganisms

The effects of heavy metals, at sub-lethal concentrations, on activated sludge microbial ecosystem were investigated. Adsorption capacity and rate of copper, chromium, lead and zinc on microbial flocs were much faster than that of organic matters. Metals affected not only the adsorption rate of organic matters but also the COD adsorption capacity of the activated sludge. Effects of heavy metals. on wastewater treatment performance of a sequencing batch reactor were also studied. Metal-laden wastewater at sub-lethal levels affected the performance to different extents, depending on the hydraulic retention time. Metal ions acted as a strong competitor against the organic compounds for active sites on the bioflocs instead of acting as a toxic microbial inhibitor, thus hampering organic adsorption and affecting the COD removal efficiency under shorter HRTs.     

A modal approach to vehicular emissions and fuel consumption model development

This study reports on the analysis of emissions and fuel consumption from motor vehicles using a modal approach. The four standard driving modes are idling, accelerating, cruising, and decelerating. On-road data were collected using instrumented test vehicles traveling many times through the urban areas of Hong Kong. A model was developed for estimating vehicular fuel consumption and emissions as a function of instantaneous speed and driving mode. Piecewise interpolation functions were proposed for each nonidling driving mode. Idling emission and fuel consumption rates were estimated as negative exponential functions of idling time. Preliminary modeling results showed good agreements for the test vehicles and indicated that the on-road measurements are feasible for the development of modal emission and fuel consumption models.     

Depuration of metals from soft tissues of oysters (Crassostrea gigas) transplanted from a contaminated site to clean sites

The present study aimed at studying the transplantation of oysters from a polluted site Lau Fau Shan (existing oyster culture zone) in Deep Bay to two clean sites mariculture zones at Yung Shue O and Kat O. The hydrological data, growth of oyster shell length, mortality and metal contents in whole soft tissue were monitored from February 1993 to February 1994. The high growth phase (increase in shell length) and gametogenesis (decrease in dry weight of whole soft tissue) were noted in winter (with low temperature and high salinity), and slow growth phase and spawning in summer (with high temperature and low salinity). Significant reductions (p<0.05) of Cd, Cr and Pb concentrations (dry wt basis) in soft tissue of transplanted oysters were observed at Kat O by 29, 55 and 29%, respectively, and at Yung Shue O by 34, 44 and 34%, respectively, with respect to the baseline values for the first batch of oysters and the concentrations in samples collected from Lau Fau Shan in the same months. Maximum reductions of total metal burden in whole soft tissue (microg per individual oyster) of the first oyster batch were found for Cd, Cr, Pb and Sb to be 62, 49, 60 and 25%, respectively, at Kat O, and to be 56, 47, 32 and 49%, respectively, at Yung Shue O. For the second batch of oysters transplanted to Yung Shue O in July 1993, significant reductions (p<0.05) of Cd concentration and total burden of Cd by 60 and 21%, respectively, were observed in February 1994. The high accumulated mortality and the significant (p<0.05) lower growth rate of the transplanted oysters illustrated that the best time for transplantation of oysters should be between the end of gametogenesis and the start of spawning (i.e. January and February), and the oysters should not be kept for longer than 3 months at the transplantation sites.     

Analyses of airborne Be concentrations in Hong Kong using back-trajectories

A total of 71 air samples were collected in Hong Kong area from November 2001 to February 2003 using a high-volume air sampler and a high-volume cascade impactor with five atmospheric pressure stages. The ⁷Be radioactivity on each stage was measured using a high-efficiency germanium gamma-ray spectrometer. From the radioactivity of stages, the total airborne ⁷Be radioactivity was determined. The activity median aerodynamic diameter (AMAD) of ⁷Be-associated atmospheric aerosols was found to be 0.22–1.11 μm and the geometric standard deviation (GSD) was found to be 1.2–10.5. With the assumed mean growth rate (MGR) of atmospheric aerosols of 0.004–0.005 μm h⁻¹ and the size of Aitken nuclei of 0.015 μm, the residence times of ⁷Be-associated atmospheric aerosols were also found from the AMAD.Three-dimensional 4-day back-trajectories were obtained using the HYSPLIT model from NOAA Air Resources Laboratory. These trajectories were used with the measured ⁷Be radioactivity to construct regional ⁷Be intensity fields for four different altitude levels (less than 1000, 1000–2000, 2000–3000 and above 3000 m) with a Geographic Information System (GIS). Low ⁷Be intensities were found to have advected from low altitudes (less than 1000 m) and oceanic areas. The ⁷Be intensities increased for the higher intensity field layers.By comparing the time taken for air masses to come from the ⁷Be source to Hong Kong and the residence time determined from the AMAD of ⁷Be-associated atmospheric aerosols, good agreement was found if the mean growth rate of 0.005 μm h⁻¹ for atmospheric aerosols was used, and the use of back-trajectories was shown to be satisfactory even up to about 6.5 d. By using the residence time with a MGR of 0.005 μm h⁻¹, the ⁷Be source was found to be relatively well confined in the areas of Mongolia and southeastern Siberia, which further supported that the association of ⁷Be source with the Siberian anticyclone.     

怠速时汽车污染物在排气尾流中扩散特性的数值分析

利用k-ε湍流模型对怠速条件下汽车排气污染物在排气尾流中的扩散特性进行了研究.汽车尾流中CO₂浓度变化规律的模拟计算结果与实测数据具有很好的一致性.数值分析了排气浓度、速度、方向以及侧风强度等对怠速条件下汽车污染物在排气尾流中扩散的影响.研究结果表明,排气出口污染物浓度的变化将改变排气尾流中污染物浓度的大小,但尾流扩散区域的结构基本保持不变;排气速度会直接影响到污染物在尾流下游的穿透距离及显著向上扩散的位置;相对排气浓度和排气速度而言,排气方向对尾流结构及污染物在尾流中的扩散与分布具有更大的影响;侧风对排气尾流的结构同样具有重要的影响,它可以有效地改变汽车排气尾流的扩散方向和污染物的浓度分布.     

PCDD/PCDF reduction by the co-combustion process

A novel process, termed the co-combustion process, has been developed and designed to utilise the thermal treatment of municipal solid waste (MSW) in cement clinker production and reduce PCDD/PCDF emissions. To test the conceptual design; detailed engineering design of the process and equipment was performed and a pilot plant was constructed to treat up to 40 tonnes MSW per day. The novel process features included several units external to the main traditional cement rotary kiln: an external calcinations unit in which the hot gas calcined the limestone thus making significant energy savings for this chemical reaction; the lime generated was used in a second chamber to act as a giant acid gas scrubber to remove SOx and particularly HCl (a source of chloride); an external rotary kiln and secondary combustion unit capable of producing a hot gas at 1200 degrees C; a gas cooler to simulate a boiler turbogenerator set for electricity generation; the incorporation of some of the bottom ash, calcined lime and dust collector solids into the cement clinker. A PCDD/PCDF inventory has been completed for the entire process and measured PCDD/PCDF emissions were 0.001 ng I-TEQ/Nm(3) on average which is 1% of the best practical means [Hong Kong Environmental Protection Department, 2001. A guidance note on the best practicable means for incinerators (municipal waste incineration), BPM12/1] MSW incineration emission limit values.     

Factors controlling pathogen destruction during anaerobic digestion of biowastes

Anaerobic digestion is the principal method of stabilising biosolids from urban wastewater treatment in the UK, and it also has application for the treatment of other types of biowaste. Increasing awareness of the potential risks to human and animal health from environmental sources of pathogens has focused attention on the efficacy of waste treatment processes at destroying pathogenic microorganisms in biowastes recycled to agricultural land. The degree of disinfection achieved by a particular anaerobic digester is influenced by a variety of interacting operational variables and conditions, which can often deviate from the ideal. Experimental investigations demonstrate that Escherichia coli and Salmonella spp. are not damaged by mesophilic temperatures, whereas rapid inactivation occurs by thermophilic digestion. A hydraulic, biokinetic and thermodynamic model of pathogen inactivation during anaerobic digestion showed that a 2 log10 reduction in E. coli (the minimum removal required for agricultural use of conventionally treated biosolids) is likely to challenge most conventional mesophilic digesters, unless strict maintenance and management practices are adopted to minimise dead zones and by-pass flow. Efficient mixing and organic matter stabilisation are the main factors controlling the rate of inactivation under mesophilic conditions and not a direct effect of temperature per se on pathogenic organisms.     

Distribution of polycyclic aromatic hydrocarbons in soils at Guiyu area of China, affected by recycling of electronic waste using primitive technologies

The concentration, distribution, profile and possible source of polycyclic aromatic hydrocarbons (PAHs) in soil were studied in Guiyu, an electronic waste (E-waste) recycling center, using primitive technologies in Southeast China. Sixteen USEPA priority PAHs were analyzed in 49 soil samples (0-10 cm layer) in terms of individual and total concentrations, together with soil organic matter (SOM) concentrations. The concentrations of a sum of 16 PAHs ranged from 44.8 to 3206 microgkg(-1) (dry weight basis), in the descending order of E-waste open burning sites (2065 microgkg(-1))>areas near burning sites (851microgkg(-1))>rice fields (354 microgkg(-1))>reservoir areas (125microgkg(-1)). The dominant PAHs were naphthalene, phenanthrene and fluoranthene, which were mainly derived from incomplete combustion of E-waste (e.g. wire insulations and PVC materials), and partly from coal combustion and motorcycle exhausts. All individual and total PAH concentrations were significantly correlated with SOM except for naphthalene and acenaphthylene. Principal component analysis was performed, which indicated that PAHs were mainly distributed into three groups in accordance with their ring numbers and biological and anthropogenic source. In conclusion, PAH concentrations in the Guiyu soil were affected by the primitive E-waste recycling activities.