混合表面活性剂-浊点萃取法测定沉积物中多环芳烃的含量

以混合型表面活性剂（十二烷基硫酸钠（SDS）和对叔辛基苯基聚己二醇醚（Triton X-114））为萃取剂,采用浊点萃取法萃取沉积物中的15种多环芳烃（PAHs）,并利用HPLC技术测定15种PAHs的含量。实验结果表明,当混合型表面活性剂的加入量 3％（w）、混合型表面活性剂中SDS含量 50%（φ）、Na2SO4含量 8％（w）、萃取温度 60 ℃、超声萃取时间 10 min 时,15种PAHs的线性关系良好,r=0.998 9~0.999 7,检出限0.4~8.2 μg/L,加标回收率71.22%~97.36%,相对标准偏差0.92%~4.36%（n=6）。     

稀土元素Pr辅助的类Fenton试剂氧化法处理染料废水

以靛蓝为目标污染物,采用稀土元素Pr辅助的类Fenton试剂氧化法处理模拟染料废水。制备了双金属氧化物催化剂Fe_2-xPr_xO₃,考察了催化剂中n（Pr）∶n（Fe）、催化剂加入量、初始靛蓝质量浓度、H₂O₂加入量、废水pH对废水脱色效果的影响。实验结果表明：Pr在很大程度上提高了类Fenton反应的效率,废水脱色率得到显著提高;在n（Pr）∶n（Fe）=1∶5、初始靛蓝质量浓度为30 mg/L、催化剂加入量为500 mg/L、H₂O₂加入量为40 mL/L、废水pH为3的最佳工艺条件下,反应50 min时废水脱色率达到92.78%。     

Distribution,origin, and transformation of metal and metalloid pollution in vegetable fields,irrigation water,and aerosols near a Pb-Zn mine

Pollution of arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) in vegetable fields was investigated near a Pb-Zn mine that has been exploited for over 50 years without a tailing reservoir. A total of 205 water, soil, and aerosol samples were taken and quantified by combined chemical, spectrometric, and mineral analytical methods. The pollution origins were identified by Pb isotopes and the pathways of transformation and transport of the elements and minerals was studied. The data showed that the vegetable fields were seriously polluted by As, Cd, and Pb. Some concentrations in the samples were beyond the regulatory levels and not suitable for agricultural activities. This study revealed that: (1) particulate matter is a major pollution source and an important carrier of mineral particles and pollutants; (2) the elements from the polluted water and soils were strongly correlated with each other; (3) Pb isotope ratios from the samples show that Pb minerals were the major pollution sources in the nearby vegetable fields, and the aerosols were the main carrier of mining pollution; (4) the alkaline, rich-carbonate, and wet conditions in this area promoted the weathering and transformation of galena into the secondary minerals, anglesite and cerussite, which are significant evidence of such processes; (5) the soil and the aerosols are a recycled secondary pollution source for each other when being re-suspended with wind. Highlights ? Mining activities generated heavy metal pollution in fields around a Pb-Zn mine ? The elements from water and soils are strongly correlated ? Anglesite and cerussite are evidence of galena transformation into secondary minerals ? Particulate matter is an important transport carrier of pollution     

The evaluation of heavy metal accumulation and application of a comprehensive bio-concentration index for woody species on contaminated sites in Hunan,China

Fast-growing metal-accumulating woody plants are considered potential candidates for phytoextraction of metals. Shuikoushan mining, one of the biggest Pb and Zn production bases in China, presents an important source of the pollution of environment during the last 100 years. Over 150 km² of fertile soil have been contaminated by the dust, slag, and tailings from this mining. The goal of the present work has been to determine the content of Pb, Zn, Cd, and Cu in wild woody plants (18 species) naturally growing in this area. Two hundred five plant and soil samples from 11 contaminated sites were collected and analyzed. In addition, to assess the ability of multi-metal accumulation of these trees, we proposed a predictive comprehensive bio-concentration index (CBCI) based on fuzzy synthetic assessment. Our data suggest some adult trees could also accumulate a large amount of metals. Pb concentrations in leaves of Paulownia fortunei (Seem.) Hemsl. (1,179 mg/kg) exceeded the hyperaccumulation threshold (1,000 mg/kg). Elevated Pb concentrations (973.38 mg/kg) were also found in the leaves of Broussonetia papyrifera (L.) Vent., with a Pb bio-concentration factor of up to 0.701. Endemic species, Zenia insignis Chun exhibited huge potential for Zn and Cd phytoextraction, with the highest concentrations of Zn (1,968 mg/kg) and Cd (44.40 mg/kg), characteristic root nodules, and fast growth rates in poor soils. As for multi-metal accumulation ability, native species B. papyrifera was calculated to have the most exceptional ability to accumulate various metals simultaneously (CBCI 2.93), followed by Amorpha fruticosa L. (CBCI 2.72) and Lagerstroemia indica L. (CBCI 2.53). A trend of increasing metal from trunks to leaves (trunks?<?branches?<?leaves) and towards fine roots has been shown by metal partitioning between tissues. The proposed CBCI would allow for the selection of suitable trees for phytoremediation in the future.     

Toxicological assessment of chlorinated diphenyl ethers in the rat

Abstract

Chlorinated diphenyl ethers are environmental contaminants that have been found in Great Lakes fish and birds. Because of their presence in the food chain, and potential for human exposure, the present short‐term study was conducted to assess their toxicity. Groups of 10 male and 10 female rats were each given by gavage 2,2’,4,4'6‐pentachlorodiphenyl ether (CDE1), 2,2’,4,4’,5,6‐hexachlorodiphenyl ether (CDE2) or 2,2’,3,3’,4,6'‐hexachlorodiphenyl ether (CDE3) at dose levels of 0.04, 0.4, 4.0 or 40 mg/kg b.w./day for a period of 28 days. The control group received an equivalent volume of corn oil only (0.5 ml/100 g b.w.). Treatment with the three CDE congeners did not result in suppression of growth rate or food consumption. Increased liver weights were seen in the animals of both sexes fed 40 mg/kg CDE2, in males treated with 40 mg/kg CDE1, and in females with 40 mg/kg CDE3. Hepatic microsomal aminopyrine demethylase activity was significantly higher in the male rats administered 40 mg/kg CDE2, and aniline hydroxylase activity was elevated in the females following the same treatment. Serum glucose, calcium, protein and urea nitrogen of CDE1‐treated males were higher than the control. Levels of uric acid, potassium and LDH of CDE3‐treated females were also elevated. No hematological changes were observed. Histological examination revealed that the liver and thyroid were the target organs affected by CDE treatment but the morphological changes were mild even at the highest dose level. Changes in the liver consisted of nuclear vesiculation and increased cytoplasmic volume. Alterations in the thyroid were characterized by increased epithelial height and follicular collapse. Based on the data presented above, the 3 CDE congeners can only be considered moderately toxic in the rat.     

Carbonyl Emissions from Commercial Cooking Sources in Hong Kong

Abstract

Cooking fumes are an important carbonyl emission source, especially in a highly urbanized city, such as Hong Kong. Cooking exhaust from 15 commercial kitchens of a variety of cooking styles was sampled and analyzed for a suite of 13 carbonyl compounds. Carbonyl compositions were varied among the different cooking styles. Formal dehyde was generally the most abundant carbonyl, and its contribution to the total carbonyl amount on a molar basis ranged from 12 to 60%. Acrolein was also found to be an abundant carbonyl in the cooking exhaust. The highest contribution by acrolein to the total carbonyls was found to be 30% in the exhaust of a western-style steak restaurant. Long-chain saturated carbonyls, that is, heptanal, octanal, and nonanal, accounted for a signifi-cant fraction (>40%) of the total carbonyls in kitchens that always used heated cooking oils. Two dicarbonyls, glyoxal and methylglyoxal, had a various presence in the cooking emissions, ranging from negligible to 10%. The presence of benzaldehyde and tolualdehyde was mostly negligible in the sampled kitchen exhaust. Annual emission rates of both individual carbonyls and total carbon-yls were estimated for various types of commercial kitchens. Local-style fast-food shops contributed the highest total carbonyl emissions per year mainly because of the large number of this kind of restaurant in Hong Kong. The citywide annual emission rates of the three most toxic carbonyls, formaldehyde, acetaldehyde, and acrolein, were estimated assuming that the limited number of sampled restaurants were representative of the average restaurants. Such estimates of carbonyl emission rates were comparable to the estimated carbonyl emissions from vehicular sources, suggesting the importance of commercial cooking as a source for carbonyls in Hong Kong.     

不同改性方式对控释碳源材料脱氮性能的影响

以玉米淀粉(S)为碳源,聚乙烯醇(P)为骨架载体,根据是否用硼酸(B)和硫酸钠(N)做改性处理,制备了GSP、GSP-N、GSP-B和GSP-BN 4种控释碳源材料,研究N、B和BN 3种改性方式对碳源材料脱氮性能的影响。在添加4种碳源的静态实验中,硝酸盐氮去除率均在96.1%以上。碳源材料的改性对硝酸盐氮的降解情况影响不明显,但对脱氮过程中TOC、亚硝酸盐氮、氨氮和TN浓度的变化有不同程度的影响。以TOC、亚硝酸盐氮、氨氮和TN为指标,N、BN和B 3种改性方式综合效益指数分别为5.62、4.6和1.92,硫酸钠(N)改性处理对提高控释碳源材料整体性能具有最佳效果。     

Optimization of two-step catalyzed biodiesel production from soybean waste cooking oil

An acid–base-catalyst-based two-step biodiesel production experiment from soybean waste cooking oil was carried out to identify which parameter is the most influential among the experimental parameters by using the Taguchi method. Heterogeneous catalysts were used to avoid a water-consuming homogeneous catalyst removal process. Ferric sulfate and calcium oxide were used as acid and base catalysts, respectively, for the heterogeneous reaction. Reaction time and methanol-to-triglyceride mole ratio were significant factors. The optimum parameters for step 1 (acid esterification) were 4 h of reaction time, 4 wt. % of ferric sulfate amount, a 16:1 methanol to triglyceride mole ratio, and 400 rpm of mixing speed, respectively. For the transesterification step, the most influential factor was reaction time, and CaO amount was significant as well. On the other hand, the mole ratio of methanol and oil was relatively less significant. Optimum parameters were 3 h of reaction time, 2 wt. % of CaO, and a 12:1 methanol to triglyceride mole ratio with mixing speed at 400 rpm in this experimental range. Under the optimum conditions, waste cooking oil with 5.27 mg KOH/g of acid value was converted into crude biodiesel by a two-step process with fatty acid methyl ester content reaching 89.8 % without any further post-purification.     

Study on photocatalytic degradation of gaseous dichloromethane using pure and iron ion-doped TiO2 prepared by the sol-gel method

The synthesis of TiO₂ and Fe–TiO₂ by sol–gel method is demonstrated and characterized. The characterization of TiO₂ and Fe–TiO₂ is performed with instruments, including TGA/DTA, FTIR, UV–Vis, N₂ adsorption and SEM. Dichloromethane is used for the photocatalytic activity test. From the results of dichloromethane photocatalyitc degradation, the calcined temperature of TiO₂ and the presence of water vapor influence the photocatalytic activity. The optimum doping amount of iron ions is 0.005 mol%, and this can enhance the photocatalytic activity, while too great an amount will make the iron ions become recombination centers for the electron–hole pairs and reduce the photocatalytic activity. UV–Vis diffuse reflectance spectra of Fe–TiO₂ show an increase in absorbency in the visible light region with the increase in iron ions doping concentration The intermediate of dichloromethane photodegradation includes CHCl₃, CCl₄, CH₂Cl₂ and COCl₂. The presence of iron ions may reduce the adsorption of Cl element on the surface of the photocatalyst.     

Degradation of atrazine by modified stepwise-Fenton's processes

The removal of atrazine (ATZ) by stepwise Fenton's processes (stepwise-FP) was studied and the system models were developed through the examination of reaction kinetics. The study compared the performance of the removal of ATZ by conventional FP with stepwise-FP, where the total dose of H(2)O(2) was split and inputted into the system at different times and/or quantities. The performance of stepwise-FP was found to be better than that of conventional FP. This was probably due to the minimization of the peak concentration of H(2)O(2) in the solution, which reduced the probability that valuable H(2)O(2) and hydroxyl radicals would be consumed in forming weaker radicals. The reaction kinetics of the decay of ATZ in stepwise-FP was found to be a two-stage process; and in each stage, fast decay followed by stagnant decay was observed. Two characterized constants (the initial decay rate and the oxidative capacity) were introduced and were found to be useful in quantifying the stepwise-FP. The models for predicting stepwise-FP with respect to different dosing times and/or asymmetrical doses were developed, and were found to be very useful for evaluating the system performance and/or for process design.