The system design of UV-assisted catalytic oxidation process--degradation of 2,4-D

Unlike the conventional first- or second-order model, a novel approach to design for the removal of 2,4-dichlorophenoxy (2,4-D) by the UV-catalytic oxidation process (UVCOP) was investigated. Two distinctive parameters, initial decay rate and maximum oxidative capacity, were characterized. By using these parameters, the performance of the degradation of 2,4-D by UVCOP regarding to the reagent dosages could be successfully predicted. Low concentrations of ferrous ion was found to be a rate-limiting factor for the process while the dosage of hydrogen peroxide was concluded as a dominant species in determining the maximum oxidation capacities. This information can be used to optimize the treatment process and achieve the expected performance target; an "optimal-dose model" was developed accordingly. The model is an intelligent and useful tool to evaluate the optimal doses of hydrogen peroxide with the minimum dose of ferrous ion, which leads to a better design of the treatment process.     

低温厌氧处理低浓度废水研究进展

对低温下厌氧处理低浓度废水的最新进展进行了较全面综述。高效厌氧反应器为这一发展提供了可能。首选反应器是膨胀颗粒污泥床 (EGSB)反应器。若废水中颗粒有机物含量较高 ,采用两级系统 (两个EGSB ,水解上流式污泥床(HUSB)反应器 +EGSB ,上流式厌氧污泥床 (UASB)反应器 +EGSB等 )处理效果较好。新兴的厌氧膜生物反应器也是该领域的一个发展方向。低温 ( 3— 12℃ )、低浓度 (COD <10 0 0mg L)废水中培养的嗜温种泥保持令人满意的产甲烷活性。其最佳代谢温度仍在中温范围 ( 30— 40℃ ) ,表明主要菌群仍是嗜温菌。     

某造纸企业扩建项目环境影响评价工作中清洁生产方案的制定

某造纸企业现有1#～4#生产线在原料储存、工艺技术、设备维护及管理等方面存在较多问题,现拟扩建5#生产线,针对现有工程存在的具体问题及扩建工程原料采用进口木浆的特点,环评制定了1#～4#线集中制浆技改、4#线除渣、1#、4#线节电改造、污水处理站节电改造、可控硅改变频、5#线白水回用等一系列清洁生产方案,并进行可行性分析,给出清洁生产方案实施前后的环境效益对比分析.     

粉煤灰利用的最佳方式——粉煤灰半钢性路面应用研究

通过对粉煤灰半钢性路面结构研究和技术性能分析,可以证明修路是利用粉煤灰的最佳方式之一,粉煤灰半钢性路面有资源充足、结构合理、技术先进、经济等特点,既节省了投资、延长了道路使用寿命又保护了环境.     

TiO_2太阳能光催化降解有机污染物的研究进展

以太阳能为激发光源的 Ti O2 光催化氧化技术是一项极具运用前景的绿色环保技术。简要介绍了 Ti O2 光催化氧化的原理、催化剂 Ti O2 的制备研究、Ti O2 太阳能反应器的研制以及该项技术在有机污染物降解中的应用     

垃圾渗滤液电化学催化氧化法深度处理研究

研究利用电化学催化氧化法深度处理经生物处理后的垃圾渗滤液时，电压、氧化时间、氯离子浓度及温度对有机物降解的影响。试验结果表明：在电压3．5V，电流密度为7．0mA／cm^2．氧化时间2．5h．氯离子的浓度2000mg／L的条件下，垃圾渗滤液的CODCr由464．0mg／L降低到200．0mg／L，NH3^-N的去除率大于95％。     

Separating method and dynamic processes of Nano-Al13

In order to investigate the characteristics of pure Nano-Al₁₃, Nano-Al₁₃ was separated and purified from a series of poly-aluminum chloride (PAC) solutions which had the same Al₁₃ percentage but different total Al concentrations, by using column chromatography, ethanol-acetone resolving and SO²⁻ ₄/Ba²⁺ displacement. The Al₁₃ species yield was characterized by Al-ferron timed complexation spectrophotometry and ²⁷Al-NMR (nuclear magnetic resonance). The coagulation efficiency of Nano-Al₁₃, PAC and AlCl₃ in synthetic water was also investigated by Jar tests. The dynamic process and aggregation state of kaolin suspensions coagulating with Nano-Al₁₃, PAC and AlCl₃ were similarly investigated using a photometric dispersion analyzer 2000 (PDA2000). The experimental results indicated that the ethanol-acetone resolving method was simple and could separate the PAC solution at different concentrations, while column chromatography could separate PAC solutions at low concentrations. The SO₄ ²⁻/Ba²⁺ displacement method could separate PAC solutions at high concentrations. However, extra inorganic cation and anion could be added in the solution during separation. The coagulation efficiency and dynamic experimental results showed that Nano-Al₁₃ with high positive-charged species was effective in removing turbidity and color. The dynamic process results showed that Nano-Al₁₃ also had the best recovery capability after shearing compared with PAC and AlCl₃ because the Nano-Al₁₃ conformation is more effective in charge neutralization. Translated from Acta Scientiae Circumstantiae, 2005, 25(6): 767–772 [译自: 环境科学学报]     

漓江风景区环境现状及变化趋势研究

本文根据漓江风景区的水环境、声环境、生态系统和大气环境的现状 ,提出当前存在的主要问题和今后的变化趋势。     

安徽铜陵鸡冠石银(金)矿床地质地球化学特征

鸡冠石银 (金 )矿床是铜陵地区一个具中型规模的银 (金 )矿床 ,在整个长江中、下游地区都有其代表性。矿床分四个主要成矿阶段 :夕卡岩阶段、氧化物 -硫化物阶段、石英 -硫化物阶段和石英多金属硫化物-碳酸盐阶段。对矿床的微量元素分析结果表明 ,独立的银、金矿物和含Au、Ag低的硫化物、含Ag硫盐矿物 ,主要形成于热液成矿期中晚阶段 ;矿床的轻、重稀土元素总浓度比值与辉石二长闪长岩相近 ,反映出二者的同源特征 ;稳定同位素和流体包裹体成分分析结果 ,反映出该矿床以岩浆热液为主的成因标志 ;成矿热液以岩浆水为主 ,但在成矿晚期有大气降水和地层成分加入 ;成矿流体为NaCl-KCl -H2 O体系 ;矿床成因属夕卡岩 -中低温热液充填 -交代型矿床