Forest law compliance and enforcement: the case of on-farm timber extraction in Ghana

The paper investigates law compliance in case of on-farm timber extraction in Ghana. It empirically investigates compliance with rules that (i) require timber operators to obtain prior and informed consent from the farmers, (ii) require timber operators to pay appropriate and timely compensation for crop damage caused by timber extraction and (iii) ban chainsaw lumbering. The study documents a low level of compliance in all three domains. Subsequently, the paper discusses the underlying causes for the observed low compliance. The low compliance level is attributed to a legislation, and enforcement, that provides huge financial incentives for non-compliance for both farmers and timber operators, and in the latter case both with and without legal permits. At the same time the regulation is perceived to violate their moral values. The paper underlines the interests of the political elite as decisive in shaping the current regulation and the way it is implemented on the ground. It asserts that eliciting compliance requires consideration of both the instrumental and normative perspectives; else it becomes illusive. The study thus challenges the typical response of governments in developing countries, who, supported by donor agencies, attempt to elicit compliance through enhanced law enforcement efforts. The results presented on the Ghana case suggest that such an approach is unlikely to elicit compliance.     

Application of lean flammability limit study and large eddy simulation to burner development for an oxy-fuel combustion system

Previously, we developed a model to predict lean flammability limit L and flame propagation velocity Sb for pulverized coal. In the present paper, we have extended the model to apply it in development of oxy-fuel combustion systems. The basic model consists of two particles. One of the two particles burns first, then, the other particle is ignited by the heat of combustion of the one burning particle. We analyzed at what distance the first burning particle could ignite the next particle, and how fast the first burning particle could ignite the next particle. The model was verified both for air and oxy-fuel combustion conditions. Next, a method to support burner development was examined by using the model. Local Sb and L near the ignition points of the burner could be analyzed from the concentration and temperature profiles of CFD results. Flame stability was judged by the calculated Sb and L profiles, and past results of blow-off limits obtained with actual- and pilot-scale experiments. A DS^®T-burner was developed by Hitachi Power Europe, and installed at the Schwarze Pumpe pilot plant. Combination of the technique and large eddy simulation was applied to confirmation of the system.     

A simplified steady-state model for air,water and steam curtains

Curtain mitigation systems are modeled here since they have experimentally shown their efficiency in reducing the concentration of certain toxic gases within dense gas clouds. Air, water and steam are analyzed in a model as the physical barriers to decrease the gas concentration. The model, developed for a steady-state mitigation process, is based on the mass, energy and momentum conservation laws. Concentration estimations during the dispersion before and after the mitigation are performed with a SLAB type model. A sensitivity analysis for each model is given to detect which variables have bigger effects. A release of chlorine is used as an example and the results are calculated in a prototype developed in Visual C++, where the model is solved using the Runge–Kutta 4th order method. The results include the effects of composition, speed, temperature and height of the releasing point as well as a comparison with CFD simulations. The proposed model is simplified and it cannot reproduce eddy effects but it is fast and robust enough. The model provides a set of equations that can be used in numerical problems where explicit derivatives are required, e.g. optimizations procedures.     

The efficacy of protoporphyrin as a predictive biomarker for lead exposure in canvasback ducks: Effect of sample storage time

We used 363 blood samples collected from wild canvasback dueks (Aythya valisineria) at Catahoula Lake, Louisiana, U.S.A. to evaluate the effect of sample storage time on the efficacy of erythrocytic protoporphyrin as an indicator of lead exposure. The protoporphyrin concentration of each sample was determined by hematofluorometry within 5 min of blood collection and after refrigeration at 4 °C for 24 and 48 h. All samples were analyzed for lead by atomic absorption spectrophotometry. Based on a blood lead concentration of 0.2 ppm wet weight as positive evidence for lead exposure, the protoporphyrin technique resulted in overall error rates of 29%, 20%, and 19% and false negative error rates of 47%, 29% and 25% when hematofluorometric determinations were made on blood at 5 min, 24 h, and 48 h, respectively. False positive error rates were less than 10% for all three measurement times. The accuracy of the 24-h erythrocytic protoporphyrin classification of blood samples as positive or negative for lead exposure was significantly greater than the 5-min classification, but no improvement in accuracy was gained when samples were tested at 48 h. The false negative errors were probably due, at least in part, to the lag time between lead exposure and the increase of blood protoporphyrin concentrations. False negatives resulted in an underestimation of the true number of canvasbacks exposed to lead, indicating that hematofluorometry provides a conservative estimate of lead exposure.The U.S. Government's right to retain a non-exclusive, royalty-free licence in and to any copyright is acknowledgedDeceased     

Evaluation of ecological network analysis: Validation of output

Ecological network analysis (ENA) is a modeling approach increasingly being used to evaluate food webs and provide an ecosystem-based approach to resource management. Unfortunately, validation of ENA output is rarely performed. This study represents part of a larger effort to critically evaluate ENA. Here we validate ENA output using stable isotope analysis (SIA), and where validation is not met, determine the effects of modifying trophic networks to reflect validation.     

Spatial–temporal pattern of bluefin tuna (Thunnus thynnus L. 1758) gonad maturation across the Mediterranean Sea

Atlantic bluefin tuna (BFT; Thunnus thynnus) is a migrating species straddling the North Atlantic Ocean and Mediterranean Sea. It is assumed that this species is divided into a western and an eastern stock, which spawn in the Gulf of Mexico and the Mediterranean Sea, respectively. To learn more about the reproductive behavior of the eastern BFT stock, we tracked gonadal development in adult fish that were sampled between April and July during three consecutive years (2003–2005). Sampling campaigns were carried out using common fishing methods at selected locations within the Mediterranean Sea, namely Levantine Sea, Malta, and Balearic Islands. An additional sampling point, Barbate, was situated northwest of the Straits of Gibraltar along the Atlantic coast. Morphometric parameters such as the total body mass (M _B) and the weights of the gonads (M _G) were recorded, and the respective gonadosomatic index (GSI) values were calculated. The data collected revealed two important trends: (1) GSI values are higher in fish caught in the eastern rather than the western locations across the Mediterranean Sea, and (2) the GSI reaches maximum values between late May and early June in Levantine Sea (eastern Mediterranean Sea), and only 2 and 4 weeks later in the central (Malta) and western (Balearic Islands) locations, respectively. The advanced gonadal development in BFT correlates well with higher sea surface temperatures. Our findings also distinguish the northern Levantine Sea BFT population (mean M _B 78.41 ± 4.13 kg), and the Barbate BFT population with the greatest M _B (all fish sampled > 100 kg). These data reflect a situation in which the eastern Mediterranean basin may function as a habitat for young BFT, until they gain a larger M _B and are able to move to the Atlantic Ocean. However, the existence of genetically discrete BFT populations in the Mediterranean Sea cannot be ruled out.     

Phenological sequences reveal aggregate life history response to climatic warming

Climatic warming is associated with organisms breeding earlier in the season than is typical for their species. In some species, however, response to warming is more complex than a simple advance in the timing of all life history events preceding reproduction. Disparities in the extent to which different components of the reproductive phenology of organisms vary with climatic warming indicate that not all life history events are equally responsive to environmental variation. Here, we propose that our understanding of phenological response to climate change can be improved by considering entire sequences of events comprising the aggregate life histories of organisms preceding reproduction. We present results of a two-year warming experiment conducted on 33 individuals of three plant species inhabiting a low-arctic site. Analysis of phenological sequences of three key events for each species revealed how the aggregate life histories preceding reproduction responded to warming, and which individual events exerted the greatest influence on aggregate life history variation. For alpine chickweed (Cerastium alpinum), warming elicited a shortening of the duration of the emergence stage by 2.5 days on average, but the aggregate life history did not differ between warmed and ambient plots. For gray willow (Salix glauca), however, all phenological events monitored occurred earlier on warmed than on ambient plots, and warming reduced the aggregate life history of this species by 22 days on average. Similarly, in dwarf birch (Betula nana), warming advanced flower bud set, blooming, and fruit set and reduced the aggregate life history by 27 days on average. Our approach provides important insight into life history responses of many organisms to climate change and other forms of environmental variation. Such insight may be compromised by considering changes in individual phenological events in isolation.     

Refueling while flying: foraging bats combust food rapidly and directly to power flight

Flying vertebrates, such as bats, face exceptionally high energy costs during active flapping flight. Once airborne, energy turnover may exceed basal metabolic rate by a factor of up to 15. Here, we asked whether fuel that powers flight originates from exogenous (dietary nutrients), endogenous sources (mostly body lipids or glycogen), or a combination of both. Since most insectivorous bats fly continuously over relatively long time periods during foraging, we assumed that slowly mobilized glycogen, although suitable for supporting brief sallying flights, is inadequate to power aerial insect-hunting of bats. We hypothesized that the insect-feeding Noctilio albiventris rapidly mobilizes and combusts nutrients from insects it has just eaten instead of utilizing endogenous lipids. We used the stable carbon isotope ratio in the bats' exhaled breath (delta13C(brth)) to assess the origin of metabolized substrates of resting and flying N. albiventris in two nutritional conditions: fasted and recently fed. The breath of fasted resting bats was depleted in 13C in relation to their insect diet (delta13C(diet)), indicating the combustion of 13C depleted body lipids. In contrast to this, delta13C(brth) of bats that had recently fed closely matched delta13C(diet) in both resting and flying bats, suggesting a quick mobilization of ingested nutrients for metabolism. In contrast to most non-volant mammals, bats have evolved the ability to fuel their high energy expenditure rates through the rapid combustion of exogenous nutrients, enabling them to conquer the nocturnal niche of aerial insectivory.     

Beurteilung des Ozonrisikos für die Waldregionen Bayerns am Beispiel des Jahres 2002 und des Extremtrockenjahres 2003 auf der Basis der externen Ozonexposition und der internen Ozonaufnahme

Background, aim, and scope Increasing background concentrations of ground-level tropospheric ozone and more frequent and prolonged summer drought incidences due to climate change are supposed to increase the stress on Bavarian forests. For such scenarios growth reduction and yield losses are predicted. Sustainable forest management in Bavaria aims to significantly increase the proportion of beech (Fagus sylvatica L.) because of its broad ecological amplitude. In our regional study different approaches for calculating ozone impact were used to estimate the risks for Bavarian forests in the average climatic, rather moist year 2002 and the extremely dry year 2003.Materials and methods Measurements were conducted for eleven forest ecosystem sites and two forest research sites representing typical Bavarian forest stands under different climatic conditions and situated in different altitudes. For risk assessment currently used approaches were applied either based on the calculation of the cumulative ozone exposure (external dose; MPOC maximal permitted ozone concentration; critical level AOT40_phen? accumulated ozone exposure over a threshold of 40 nl [O₃] l^–1, for the effective phenolgy of beech) or based on the calculation of the phytomedically relevant ozone flux into the stomata (internal dose, critical level AF_st>1,6, accumulated stomatal flux above a flux threshold of 1.6 nmol O₃?m^–2 PLA; PLA = projected leaf area). For calculations continuously recorded ozone concentrations and meteorological and phenological data from nearby rural open field background measuring stations from the national air pollution control and from forested sites were used. Additionally ozone induced leaf symptoms were assessed.Results The exposure-based indices AOT40_phen and MPOC as well as the flux-based index AF_st>1.6suggest that Bavarian forests are at risk from O₃ during a rather moist average year concerning climate conditions (2002) as well as in an extreme dry year (2003). Thus, growth reductions of 5?% are predicted when thresholds are exceeded. Threshold exceedance occurred in both years at all plots, mostly already at the beginning of the growing season and often even many times over. Ozone induced leaf symptoms could be detected only on a few plots in a very slight occurrence.Discussion The results for the applied critical level indices differed depending on climatic conditions during the growing seasons: Regarding exposure-based indices, the highest degree of threshold exceedance occurred in the dry year of 2003 at all plots; the flux-based approach indicated the highest stomatal ozone uptake and thus an increased risk at moist sites or during humid years, whereas the risk was decreasing at dry sites with prolonged water limitation. Hence, soil and accordingly plant water availability was the decisive factor for the flux-modelled internal ozone uptake via stomata. Drought and increased ozone impact can generate synergistic, but also antagonistic effects for forest trees. At water limited rather dry forest sites restricted transpiration and thus production, but concurrently lower ozone uptake and reduced risk for damage can be expected.Conclusions, recommendations, and perspectives For realistic site-specific risk assessment in forest stands the determination of the internal ozone dose via modeling flux based internal stomatal ozone uptake is more appropriate than the calculation of the external ozone dose. The predicted 5?% growth reductions are in discrepancy with the frequently observed increment increase during the last decades in forest stands. Comprehensive and significant statistical verification for ozone induced forest growth reduction as well as the systematic validation of thresholds for ozone in the field is still lacking. However, a multiplicity of different specific new and retrospective growth analysis data should allow closing the gap. Moreover, the determination of canopy transpiration with sap flow measurements is a novel approach to provide cause-effect related, site specific results for the effective internal ozone dose as well as for canopy water supply and consecutively for regional risk estimation. A further future objective is the refinement of O₃ flux modelling by further consideration of soil/water budget characteristics and the above mentioned improved estimations of crown and canopy transpiration. Further, the introduction of threshold ranges for forest trees in view of their specific regional climatic conditions and their validation in real forest stands is necessary for developing meaningful ozone risk predictions for forests.