Synthesis and health-based evaluation of ambient air monitoring data for the Marcellus Shale region

In recent years, there has been a marked increase in the amount of ambient air quality data collected near Marcellus Shale oil and gas development (OGD) sites. We integrated air measurement data from over 30 datasets totaling approximately 200 sampling locations nearby to Marcellus Shale development sites, focusing on 11 air pollutants that can be associated with OGD operations: fine particulate matter (PM_2.5), nitrogen dioxide (NO₂), sulfur dioxide (SO₂), acetaldehyde, benzene, ethylbenzene, formaldehyde, n-hexane, toluene, xylenes, and hydrogen sulfide (H₂S). We evaluated these data to determine whether there is evidence of community-level air quality impacts of potential health concern, making screening-level comparisons of air monitoring data with acute and chronic health-based air comparison values (HBACVs). Based on the available air monitoring data, we found that only a small fraction of measurements exceeded HBACVs, which is similar to findings from integrative air quality assessments for other shale gas plays. Therefore, the data indicate that air pollutant levels within the Marcellus Shale development region typically are below HBACV exceedance levels; however, the sporadic HBACV exceedances warrant further investigation to determine whether they may be related to specific site characteristics, or certain operations or sources. Like any air monitoring dataset, there is uncertainty as to how well the available Marcellus Shale air monitoring data characterize the range of potential exposures for people living nearby to OGD sites. Given the lesser amounts of air monitoring data available for locations within 1,000 feet of OGD sites as compared to locations between 0.2 and 1 miles, the presence of potential concentration hotspots cannot be ruled out. Additional air monitoring data, in particular more real-time data to further characterize short-term peak concentrations associated with episodic events, are needed to provide for more refined assessments of potential health risks from Marcellus Shale development.

Implications: While there is now a sizable amount of ambient air monitoring data collected nearby to OGD activities in the Marcellus Shale region, these data are currently scattered among different databases and studies. As part of an integrative assessment of Marcellus Shale air quality impacts, ambient air data are compiled for a subset of criteria air pollutants and hazardous air pollutants that have been associated with OGD activities, and compared to acute and chronic health-based air comparison values to help assess the air-related public health impacts of Marcellus Shale development.     

Rejection of emerging organic micropollutants in nanofiltration-reverse osmosis membrane applications.

The rejection of emerging trace organics by a variety of commercial reverse osmosis (RO), nanofiltration (NF), and ultra-low-pressure RO (ULPRO) membranes was investigated using TFC-HR, NF-90, NF-200, TFC-SR2, and XLE spiral membrane elements (Koch Membrane Systems, Wilmington, Massachusetts) to simulate operational conditions for drinking-water treatment and wastewater reclamation. In general, the presence of effluent organic matter (EfOM) improved the rejection of ionic organics by tight NF and RO membranes, as compared to a type-II water matrix (adjusted by ionic strength and hardness), likely as a result of a decreased negatively charged membrane surface. Rejection of ionic pharmaceutical residues and pesticides exceeded 95% by NF-90, XLE, and TFC-HR membranes and was above 89% for the NF-200 membrane. Hydrophobic nonionic compounds, such as bromoform and chloroform, exhibited a high initial rejection, as a result of both hydrophobic-hydrophobic solute-membrane interactions and steric exclusion, but rejection decreased significantly after 10 hours of operation because of partitioning of solutes through the membranes. This resulted in a partial removal of disinfection byproducts by the RO membrane TFC-HR. In a type-II water matrix, the effect of increasing feed water recoveries on rejection of hydrophilic ionic and nonionic compounds was compound-dependent and not consistent for different membranes. The presence of EfOM, however, could neutralize the effect of hydrodynamic operating condition on rejection performance. The ULPRO and tight NF membranes were operated at lower feed pressure, as compared to the TFC-HR, and provided a product water quality similar to a conventional RO membrane, regarding trace organics of interest.     

Reef development at Inhaca Island,Mozambique: coral communities and impacts of the 1999/2000 Southern African floods

Inhaca Island, southern Mozambique, is located towards the southerly latitudinal limits of coral reef growth. Reef development is restricted to the margins of channels which dissect intertidal flats on the Maputo Bay side of the island, and to depths of around 6 m. In contrast to lower latitude reefs, reef development is therefore both spatially and bathymetrically restricted (largely due to high turbidity levels). These natural stress levels were exacerbated, via increased freshwater and sediment discharge, during the severe floods of late 1999/early 2000. Flood impacts varied but were most significant on reefs on the inner (western) side of the island where live coral cover (LCC) decreased from 60.5% (1999) to 24.0% (2001). This is attributed to freshwater-induced bleaching. Dead in situ coral cover increased from 18.6% (1999) to 51.3% (2001). Reefs on the southern tip of the island, by contrast, were relatively unaffected. It is suggested that this largely reflects a closer proximity to the open Indian Ocean which mitigated the effects of freshwater dilution.     

Quantification of variability and uncertainty in air pollutant emission inventories: method and case study for utility NOx emissions

The quality of stationary source emission factors is typically described using data quality ratings, which provide no quantification of the precision of the emission factor for an average source, nor of the variability from one source to another within a category. Variability refers to actual differences caused by differences in feedstock composition, design, maintenance, and operation. Uncertainty refers to lack of knowledge regarding the true emissions. A general methodology for the quantification of variability and uncertainty in emission factors, activity factors, and emission inventories (EIs) is described, featuring the use of bootstrap simulation and related techniques. The methodology is demonstrated via a case study for a selected example of NOx emissions from coal-fired power plants. A prototype software tool was developed to implement the methodology. The range of interunit variability in selected activity and emission factors was shown to be as much as a factor of 4, and the range of uncertainty in mean emissions is shown to depend on the interunit variability and sample size. The uncertainty in the total inventory of -16 to +19% was attributed primarily to one technology group, suggesting priorities for collecting data and improving the inventory. The implications for decision-making are discussed.     

Environmental effects on the distribution of corallimorpharians in Tanzania

This study examined the distribution and abundance of corallimorpharians (Cnidaria, Anthozoa) in Tanzania in relation to different aspects of the coral reef environment. Five reefs under varying degrees of human disturbance were investigated using the line intercept transect and point technique. Corallimorpharian growth and the composition of the substratum were quantified in different habitats within reefs: the inner and middle reef flat, the reef crest, and at the 2 and 4 m depths on the reef slope. Corallimorpharians occurred on all the reefs and 5 species were identified: Rhodactis rhodostoma, R. mussoides, Ricordea yuma, Actinodiscus unguja and A. nummiforme. R. rhodostoma was the dominant corallimorpharian at all sites. Within reefs, they had the highest densities in the shallow habitats. While R. rhodostoma occurred in all habitats, the other corallimorpharian species showed uneven distributions. Corallimorpharians ranked second, after scleractinian coral, in percent living cover. Results from this study suggested that corallimorpharians benefitted from disturbance compared with other sessile organisms. They preferred inhabiting areas with dead coral, rock and rubble whilst live coral was avoided. There was a positive relationship between percent cover of corallimorpharians and water turbidity and they dominated the more disturbed reefs, i.e. reefs that were affected by higher nutrient loads and fishing.     

Field method comparison between passive air samplers and continuous monitors for Vocs and NO2 in El Paso, Texas

This study evaluates the performance of Model 3300 Ogawa Passive Nitrogen Dioxide (NO2) Samplers and 3M 3520 Organic Vapor Monitors (OVMs) by comparing integrated passive sampling concentrations to averaged hourly NO2 and volatile organic compound (VOC) measurements at two sites in El Paso, TX. Sampling periods were three time intervals (3-day weekend, 4-day weekday, and 7-day weekly) for three consecutive weeks. OVM concentrations were corrected for ambient pressure to account for higher elevation. Precise results (< 5% relative standard deviation, RSD) were found for NO2 measurements from collocated Ogawa samplers. Reproducibility was lower from duplicate OVMs for BTEX (benzene, toluene, ethylbenzene, and xylene isomers) VOCs (> or = 77% RSD for 2-day samples) with better precision for longer sampling periods. Comparison of Ogawa NO2 samplers with chemiluminescence measurements averaged over the same time period suggested potential calibration problems with the chemiluminescence analyzer. For BTEX species, generally good agreement was obtained between OVMs and automated-gas chromatograph (auto-GC) measurements. The OVMs successfully tracked increasing levels of VOCs recorded by the auto-GCs. However, except for toluene, OVM BTEX measurements generally exceeded their continuous counterparts with a mean bias of 5-10%. Although interpretation of the study results was limited due to small sample sizes, diffusion barrier influences caused by shelters that housed OVMs and differences in sampling heights between OVMs and auto-GC inlet may explain the overestimation.     

Quantification of hourly variability in NO(x) emissions for baseload coal-fired power plants

The objectives of this paper are to (1) quantify variability in hourly utility oxides of nitrogen (NO(x)) emission factors, activity factors, and total emissions; (2) investigate the autocorrelation structure and evaluate cyclic effects at short and long scales of the time series of total hourly emissions; (3) compare emissions for the ozone (O3) season versus the entire year to identify seasonal differences, if any; and (4) evaluate interannual variability. Continuous emissions monitoring data were analyzed for 1995 and 1998 for 32 units from nine baseload power plants in the Charlotte, NC, airshed. Unit emissions have a strong 24-hr cycle attributable primarily to the capacity factor. Typical ranges of the coefficient of variation for emissions at a given hour of the day were from 0.2 to 0.45. Little difference was found when comparing weekend emissions with the entire week or when comparing the O3 season with the entire year. There were substantial differences in the mean and standard deviation of emissions when comparing 1995 and 1998 data, indicative of the effect of retrofits of control technology during the intervening time. The wide range of variability and its autocorrelation should be accounted for when developing probabilistic utility emission inventories for analysis of near-term future episodes.     

The benefits of lower ozone due to air pollution emission reductions (2002–2011) in the Eastern United States during extreme heat

ABSTRACT

Using the Community Multiscale Air Quality (CMAQ) model and the Benefits Mapping and Analysis Program – Community Edition (BenMAP-CE) tool, we estimate the benefits of anthropogenic emission reductions between 2002 and 2011 in the Eastern United States (US) with respect to surface ozone concentrations and ozone-related health and economic impacts, during a month of extreme heat, July 2011. Based on CMAQ simulations using emissions appropriate for 2002 and 2011, we estimate that emission reductions since 2002 likely prevented 10– 15 ozone exceedance days (using the 2011 maximum 8-hr average ozone standard of 75 ppbv) throughout the Ohio River Valley and 5– 10 ozone exceedance days throughout the Washington, DC – Baltimore, MD metropolitan area during this extremely hot month. CMAQ results were fed into the BenMAP-CE tool to determine the health and health-related economic benefits of anthropogenic emission reductions between 2002 and 2011. We estimate that the concomitant health benefits from the ozone reductions were significant for this anomalous month: 160–800 mortalities (95% confidence interval (CI): 70–1,010) were avoided in July 2011 in the Eastern U.S, saving an estimated $1.3–$6.6 billion (CI: $174 million–$15.5 billion). Additionally, we estimate that emission reductions resulted in 950 (CI: 90–2,350) less hospital admissions from respiratory symptoms, 370 (CI: 180–580) less hospital admissions for pneumonia, 570 (CI: 0–1650) less Emergency Room (ER) visits from asthma symptoms, 922,020 (CI: 469,960–1,370,050) less minor restricted activity days (MRADs), and 430,240 (CI: ?280,350–963,190) less symptoms of asthma exacerbation during July 2011.

Implications: We estimate the benefits of air pollution emission reductions on surface ozone concentrations and ozone-related impacts on human health and the economy between 2002 and 2011 during an extremely hot month, July 2011, in the eastern United States (US) using the CMAQ and BenMAP-CE models. Results suggest that, during July 2011, emission reductions prevented 10-15 ozone exceedance days in the Ohio River Valley and 5-10 ozone exceedance days in the Mid Atlantic; saved 160-800 lives in the Eastern US, saving $1.3 - $6.5 billion; and resulted in 950 less hospital admissions for respiratory symptoms, 370 less hospital admissions for pneumonia, 570 less Emergency Room visits for asthma symptoms, 922,020 less minor restricted activity days, and 430,240 less symptoms of asthma exacerbation.     

The effect of low molecular weight chelators on iron chelation and free radical generation as studied by ESR measurement

The purpose of this work was to improve our current knowledge of the non-enzymatic mechanisms involved in brown rot fungal decay of wood, but also to improve our understanding of chelator-mediated reactions that may occur in other biological systems where low pH conditions may prevail. Several key steps (iron chelation and reduction) during early non-enzymatic wood decay processes have been studied by using electron spin resonance (ESR). It has been proposed that low molecular weight chelators as well as Fenton reagents are involved in brown rot decay, at least in early non-enzymatic stages. In this work, the binding between a catecholate model chelator and ferric iron was studied by ESR spectroscopy. The effects of the model chelator, Fenton reagents, as well as the reaction conditions on free radical generation were also studied using ESR spin-trapping techniques. The results indicate: (1) The relative quantity of the chelator-iron complex can be determined by measurement of the intensities of the characteristic g = 4.3 ESR signal. (2) The effects of the chelator:iron ratio, the pH, and other reaction parameters on the hydroxyl radical generation in a Fenton type system can be determined using ESR spin-trapping techniques. (3) Data support the hypothesis that superoxide radicals are involved in chelator-mediated Fenton processes.