Multistep, microvolume resin fractionation combined with 3D fluorescence spectroscopy for improved DOM characterization and water quality monitoring

Conventionally, resin fractionation (RF) method has been widely used to characterize dissolved organic matter (DOM) found in different source waters based on general and broad DOM fractions grouping. In this study, a new refined method using multistep, microvolume resin fractionation combined with excitation emission matrix fluorescence spectroscopy (MSM-RF-EEMS) was developed for further isolation and characterization of subfractions within the primary DOM fractions separated from using the conventional RF method. Subsequently, its feasibility in indicating the occurrence of urban pollution in source waters was also assessed. Results from using the new MSM-RF-EEMS method strongly illustrated that several organic subfractions still exist within the regarded primary pure hydrophobic acid (HoA) fraction including the humic- and fulvic-like organic matters, tryptophan- and tyrosine-like proteins. It was found that by using the MSM-RF-EEMS method, the organic subfractions present within the primary DOM fraction could be easily identified and characterized. Further validation on the HoA fraction using the MSM-RF-EEMS method revealed that the constant association of EEM peak T1 (tryptophan) fraction could specifically be used to indicate the occurrence of urban pollution in source water. The correlation analysis on the presence of EEM peak T2 (tyrosine) fraction could be used as a supplementary proof to further verify the presence of urban pollution in source waters. These findings on using the presence of EEM peaks T1 and T2 within the primary HoA fraction would be significant and useful for developing a sensory device for online water quality monitoring.     

Development of an objective determination of a slip with a portable inclineable articulated strut slip tester (PIAST)

A portable inclineable articulated strut slip tester (PIAST) is a slipmeter that is widely used in the USA to measure coefficient of friction (COF) at the shoe sole and floor interface. A determination of a slip at the measurement interface, which is currently judged subjectively by operators, plays a crucial role in deciding the outcomes of a PIAST measurement. The goal of this study was to develop an objective determination of a slip based on the movement of the weight used by the slipmeter. The displacement of the weight and the time duration of consecutive strikes in a measurement were used to derive the objective slip criterion. Various footwear materials, floor materials and surface conditions were used to cover a wide range of COF values. The results of the regression analysis indicated that the objective COF predicted by the method developed in the current study was significant (R² = 0.997, β = 0.991, p < 0.001) in predicting the subjective COF determined by the operator.     

Organizational practices and workplace health and safety: A cross-sectional study in manufacturing companies

We report the results of a mail questionnaire for 312 manufacturing firms in the province of Ontario (Canada). We conducted a cross-sectional analysis of workplace level health and safety policies, practices and attitudes. Analyses were conducted across firm categories based upon lost-time frequency rate (LTFR) data. Lower LTFRs were associated with paternalistic initiatives, recording of occupational health and safety (OHS) measures, greater involvement of workers in decision-making, and better managerial attitudes concerning the importance of OHS. The composition of the Joint Health and Safety Committee (JHSC), a committee mandated in all workplaces we sampled, differed according to injury rate: the mean number of worker (vs. management) members on the JHSC was higher for lower injury sites, and the mean number of worker members attending JHSC meetings was also higher for lower injury worksites. In addition, workplaces with lower LTFR benefitted by having JHSCs with more executive functions and greater worker involvement. In conclusion, managerial and worker participation in OHS initiatives characterizes safer workplaces. Also, general concern of management towards OHS—illustrated by both attitudes and concrete actions—is also associated with lower injury rates.     

Enabling youth to advocate for workplace safety

Work-related injury rates for Canadian youth (ages 15–24) are alarmingly high compared to adult workers even though youth are less likely to be performing hazardous jobs. This paper reports on a document analysis of youth workplace safety education initiatives sponsored by national and provincial/territorial governmental and non-governmental agencies. Web-based documents were analyzed through the theoretical lens of self-advocacy. The self-advocacy framework highlights how youth can be agentic in altering high-risk workplaces by publicly articulating their own interests, needs, and rights (Test et al., 2005); thus, self-advocacy is a critical component in studying educational programs for youth safety. The analysis revealed that instruction on workplace safety identifies safety issues to workers and tells youth to work safely but does little to promote self-advocacy in young workers.     

An Assessment of Land Conservation Patterns in Maine Based on Spatial Analysis of Ecological and Socioeconomic Indicators

Given the nature of modern conservation acquisitions, which often result from gifts and opportunistic purchases of full or partial property rights, there is a risk that the resulting mosaic of conserved resources may not represent a coherent set of public values and benefits. With different public and private entities engaged in land conservation, one would further expect that each organization would apply separate goals and criteria to the selection and acquisition of its conservation portfolio. This set of circumstances raises an important question: what is the aggregate outcome of this land conservation process? Retrospective assessments provide a means of reviewing cumulative historical decisions and elucidating lessons for improving future conservation strategies. This study used GIS-based spatial analysis to examine the relationships of private and public conservation lands in Maine to a variety of landscape metrics in order to determine the degree to which these lands represent core ecological and socioeconomic values that are meaningful to a wide cross-section of citizens. Results revealed that the gains of past conservation efforts in Maine are counter-balanced to some extent by apparent gaps in the existing fabric of conservation holdings. Conservation lands capture a representative sample of diverse habitat, provide a large measure of protection for multiple conservation values and indicators, and offer an unusual mix of outdoor recreational opportunities for residents and visitors alike. Yet, the majority of parcels are relatively small and isolated, and thus do not provide contiguous habitat blocks that offset ongoing processes of landscape fragmentation. Furthermore, the majority of area associated with many of the ecological metrics examined in this report is located outside the boundaries of current conservation holdings. The under-represented metrics identified in this investigation can be viewed as potential targets for new strategic conservation initiatives.     

Carcinogenic potential, levels and sources of polycyclic aromatic hydrocarbon mixtures in indoor and outdoor environments and their implications for air quality standards

Both the World Health Organization and the UK Expert Panel on Air Quality Standards (EPAQS) have considered benzo(a)pyrene (BaP) as a marker of the carcinogenic potency of the polycyclic aromatic hydrocarbons (PAH) mixture, when recommending their respective guidelines for PAHs in outdoor air. The aim of this research is to compare the concentrations and relative abundance of individual PAH and their contribution to the overall carcinogenic potential of the PAH mixture in indoor and outdoor environments to assess the suitability of the UK air quality standard derived for outdoor air for use as a guideline for indoor environments. Samples were collected onto filters using active sampling in different indoor and outdoor microenvironments. The ratio of individual compounds to BaP, the BaP equivalent concentrations and the percentage contribution of each individual compound to the total carcinogenic potential of the PAH mixture were calculated. Mean concentrations were generally lower indoors (BaP=0.10 ng/m(3)) than outdoors (BaP=0.19 ng/m(3)), with the exception of indoor environments with wood burners (BaP=2.4 ng/m(3)) or ETS (BaP=0.6 ng/m(3)). The ratio of individual PAHs to BaP showed no significant differences between indoors (e.g. DahA/BaP=0.27) and outdoors (DahA/BaP=0.31). The relative contribution of BaP to the PAH overall carcinogenic potency is similar indoors (49%), outdoors (54%) and in the smelter environment (48%) used by EPAQS to derive the UK Air Quality Standard for ambient air. These results suggest the suitability of BaP as a marker for the carcinogenic potential of the PAH mixture irrespective of the environment. Despite small differences in PAH mixture composition indoors and outdoors, the level of protection afforded by the present EPAQS standard is likely to be similar whether it is applied to indoor or outdoor air.     

Physical impact of waterjet‐based sediment remediation on benthic organisms

Adding activated carbon to sediments has been shown to be an effective means of reducing the bioavailability of certain contaminants. The current state of the practice is to mechanically mix activated carbon to a target concentration of 3 percent at depths of approximately 30 cm using a rotovator or similar construction equipment. Waterjets have been used to cut hard material using a mixture of water and an abrasive. If activated carbon is substituted for the abrasive, waterjets have the potential to use surface injection as a replacement for mechanical mixing during sediment remediation. A perceived benefit of waterjet‐based sediment remediation is that there may be a reduced potential for benthic organism mortality related to amendment delivery. A set of waterjet parameters were identified that have the potential to achieve amendment placement goals, and a series of waterjet tests were conducted to evaluate the potential impact on the benthic community. The tests included mortality testing using a swimming macroinvertebrate and a burrowing invertebrate, benthic artifacts such as shells, and craft foam as a surrogate for living organisms. The results indicated that the immediate survivability was typically greater than 50 percent, and that empirical relationships between two variables (waterjet nozzle diameter and the water column height between the nozzle and the target) and the depth of cut in the foam could be established. Data are not available in the literature for direct comparison of organism survivability immediately after mechanical mixing, but the results of this study provide motivation for the further evaluation of waterjets on the basis of the low observed mortality rates. Future waterjet work may address field‐scale characterization of mixing effectiveness, resuspension potential, technical feasibility, and cost. © 2011 Wiley Periodicals, Inc.     

Measurements of non-wetting phase trapping applied to carbon dioxide storage

We measure the trapped non-wetting phase saturation as a function of the initial saturation in sand packs. The application of the work is for CO₂ storage in aquifers where capillary trapping is a rapid and effective mechanism to render injected CO₂ immobile. The CO₂ is injected into the formation followed by chase brine injection, or natural groundwater flow, which displaces and traps CO₂ on the pore scale as a residual immobile phase. Current models to predict the amount of trapping are based on experiments in consolidated media, while CO₂ may be stored in relatively shallow, poorly consolidated systems. We use analogue fluids at ambient conditions. The trapped saturation initially rises linearly with initial saturation to a value of approximately 0.13 for oil/water systems and 0.14 for gas/water systems. There then follows a region where the residual saturation is constant with further increases in initial saturation. This behaviour is not predicted by the traditional literature trapping models, but is physically consistent with unconsolidated media where most of the larger pores can easily be invaded at relatively low saturation and there is, overall, relatively little trapping. A good match to our experimental data was achieved with the trapping model proposed by Aissaoui.     

Quantification of self pollution from two diesel school buses using three independent methods

We monitored two Seattle school buses to quantify the buses’ self pollution using the dual tracers (DT), lead vehicle (LV), and chemical mass balance (CMB) methods. Each bus drove along a residential route simulating stops, with windows closed or open. Particulate matter (PM) and its constituents were monitored in the bus and from a LV. We collected source samples from the tailpipe and crankcase emissions using an on-board dilution tunnel. Concentrations of PM₁, ultrafine particle counts, elemental and organic carbon (EC/OC) were higher on the bus than the LV. The DT method estimated that the tailpipe and the crankcase emissions contributed 1.1 and 6.8 μg m^?3 of PM_2.5 inside the bus, respectively, with significantly higher crankcase self pollution (SP) when windows were closed. Approximately two-thirds of in-cabin PM_2.5 originated from background sources. Using the LV approach, SP estimates from the EC and the active personal DataRAM (pDR) measurements correlated well with the DT estimates for tailpipe and crankcase emissions, respectively, although both measurements need further calibration for accurate quantification. CMB results overestimated SP from the DT method but confirmed crankcase emissions as the major SP source. We confirmed buses’ SP using three independent methods and quantified crankcase emissions as the dominant contributor.