交通拥堵对TSP排放的影响分析

在上海市杨浦区军工路部分路段采集TSP浓度、气压、温度、分车型车流量、区段车速、信号配时等数据,通过多元回归方法分析小型车交通量,大型车交通量,拖挂车交通量及区段车速对TSP浓度的影响,建立起TSP浓度与上述交通变量的函数关系,并通过AIMSUN交通仿真软件以及基础采集数据,建立军工路路网,模拟四种交通拥堵状况(重度拥堵,中度拥堵,轻度拥堵,基本畅通)的产生和消散过程。综合分析路段交通拥堵对道路TSP排放和分布的影响。分析整理得出道路TSP小时排放总量和拥堵程度成正比关系,且TSP污染主要集中在车辆拥挤怠速的部分,车辆拥挤排队的队尾部分是TSP排放源强最高、源强增长最快的区域,增长率达到240%～290%。     

紫外线与消毒剂联合作用于黄浦江源水的研究

针对黄浦江源水砂滤出水,进行了紫外线单独作用的研究,同时对于紫外线与消毒剂联合消毒时消毒剂的投加方式对灭菌作用和消毒副产物的影响进行了研究。实验结果表明:当紫外线剂量达到42 mJ/cm2时出水水质已达到了生活饮用水卫生标准中对细菌总数和大肠杆菌数的要求,且在相同紫外剂量下,高强度时对细菌的灭活效果要好于低强度时的效果;先紫外消毒后消毒剂消毒对于微生物具有很好的杀灭作用,但是不能减少消毒副产物的产生;紫外线和消毒剂同时作用对于微生物的杀灭作用不佳,但是出水的消毒剂余量高,消毒副产物量少,这样有利于出水的安全稳定性;先消毒剂消毒再紫外消毒,发现对于消毒副产物没有多大的降解作用,更浪费了高的紫外剂量。     

焦作市高新区冬季大气不同粒径颗粒物质量特征分析

用大流量冲击式分级采样器采集大气颗粒物样品,通过重量法求出不同粒径颗粒物的质量,研究不同粒径颗粒物的质量百分比.分析不同粒径颗粒物与风速、温度、湿度等气象条件的变化规律.结果表明:各级颗粒物整体与温度和风速呈负相关性,与湿度呈正相关性,且粒径小于2.1 μm的颗粒物与湿度相关性最大.大气颗粒物主要集中在2.1 μm以下...     

抚仙湖流域城镇污染分析及控制策略

对抚仙湖流域城镇生活污染、城镇径流污染及污水处理设施等进行了全面调查与分析,并提出了相应的污染控制策略。     

Beyond hypoxia：Occurrence and characteristics of black blooms due to the decomposition of the submerged plant Potamogeton crispus in a shallow lake

Organic matter-induced black blooms(hypoxia and an offensive odor) are a serious ecosystem disasters that have occurred in some large eutrophic shallow lakes in China. In this study, we investigated two separate black blooms that were induced by Potamogeton crispus in Lake Taihu, China. The main physical and chemical characteristics, including color- and odor-related substances, of the black blooms were analyzed. The black blooms were characterized by low dissolved oxygen concentration(close to 0 mg/L), low oxidation-reduction potential, and relatively low pH of overlying water. Notably higher Fe2+and∑S2-were found in the black-bloom waters than in waters not affected by black blooms. The black color of the water may be attributable to the high concentration of these elements, as black FeS was considered to be the main substance causing the black color of blooms in freshwater lakes. Volatile organic sulfur compounds, including dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, were very abundant in the black-bloom waters. The massive anoxic degradation of dead Potamogeton crispus plants released dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, which were the main odor-causing compounds in the black blooms. The black blooms also induced an increase in ammonium nitrogen and soluble reactive phosphorus levels in the overlying waters. This extreme phenomenon not only heavily influenced the original lake ecosystem but also greatly changed the cycling of Fe, S, and nutrients in the water column.     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Ionic composition of submicron particles (PM1.0) during the long-lasting haze period in January 2013 in Wuhan, central China

In January 2013, a long-lasting severe haze episode occurred in Northern and Central China; at its maximum, it covered a land area of approximately 1.4 million km². In Wuhan, the largest city in Central China, this event was the most severe haze episode in the 21st century. Aerosol samples of submicron particles (PM_1.0) were collected during the long-lasting haze episode at an urban site and a suburban site in Wuhan to investigate the ion characteristics of PM_1.0 in this area. The mass concentrations of PM_1.0 and its water-soluble inorganic ions (WSIIs) were almost at the same levels at two sites, which indicates that PM_1.0 pollution occurs on a regional scale in Wuhan. WSIIs (Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, Cl^-, NO₃^- and SO₄^2-) were the dominant chemical species and constituted up to 48.4% and 47.4% of PM_1.0 at WD and TH, respectively. The concentrations of PM_1.0 and WSIIs on haze days were approximately two times higher than on normal days. The ion balance calculations indicate that the particles were more acidic on haze days than on normal days. The results of the back trajectory analysis imply that the high concentrations of PM_1.0 and its water-soluble inorganic ions may be caused by stagnant weather conditions in Wuhan.     

Review of the progress in preparing nano Ti02： An important environmental engineering material

TiO2 nanomaterial is promising with its high potential and outstanding performance in photocatalytic environmental applications, such as CO2 conversion, water treatment, and air quality control. For many of these applications, the particle size, crystal structure and phase, porosity, and surface area influence the activity of TiO2 dramatically. TiO2 nanomaterials with special structures and morphologies, such as nanospheres, nanowires, nanotubes, nanorods, and nanoflowers are thus synthesized due to their desired characteristics. With an emphasis on the different morphologies of TiO2 and the influence factors in the synthesis, this review summarizes fourteen TiO2 preparation methods, such as the sol-gel method, solvothermal method, and reverse micelle method. The TiO2 formation mechanisms, the advantages and disadvantages of the preparation methods, and the photocatalytic environmental application examples are proposed as well.     

建设项目环境保护初探

本文分析了项目建设中存在的问题,包括：环境影响评价、项目建设中的监管以及项目验收监测q-的规范性等问题,并着重从如何保证环境影响评价的质量,项目建设中的监管以及项目验收中的监测规范性等方面提出了对策与建议。     

焦化行业苯并芘排放量与厂界达标预测分析

论文以某100万吨/年焦化项目为例,分析其在不同地形和风速参数条件下苯并芘排放量,预测不同条件下距离焦炉炉体中心-1000～1000米范围内各网格点的苯并芘超标概率,最终得出风速、地形参数对苯并芘浓度超标概率的影响.