Potential applications of porous organic polymers as adsorbent for the adsorption of volatile organic compounds

Volatile organic compounds (VOCs) with high toxicity and carcinogenicity are emitted from kinds of industries, which endanger human health and the environment. Adsorption is a promising method for the treatment of VOCs due to its low cost and high efficiency. In recent years, activated carbons, zeolites, and mesoporous materials are widely used to remove VOCs because of their high specific surface area and abundant porosity. However, the hydrophilic nature and low desorption rate of those materials limit their commercial application. Furthermore, the adsorption capacities of VOCs still need to be improved. Porous organic polymers (POPs) with extremely high porosity, structural diversity, and hydrophobic have been considered as one of the most promising candidates for VOCs adsorption. This review generalized the superiority of POPs for VOCs adsorption compared to other porous materials and summarized the studies of VOCs adsorption on different types of POPs. Moreover, the mechanism of competitive adsorption between water and VOCs on the POPs was discussed. Finally, a concise outlook for utilizing POPs for VOCs adsorption was discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.     

Thermal defluorination behaviors of PFOS,PFOA and PFBS during regeneration of activated carbon by molten salt

• New method of mineralizing PFCs was proposed. • Activated carbon was regenerated while mineralizing PFCs. • Molten NaOH has good mineralization effect on PFOS and PFBS. Current study proposes a green regeneration method of activated carbon (AC) laden with Perfluorochemicals (PFCs) from the perspective of environmental safety and resource regeneration. The defluorination efficiencies of AC adsorbed perfluorooctanesulfonate (PFOS), perfluorooctanoic acid (PFOA) and perfluorobutanesulfonate (PFBS) using three molten sodium salts and one molten alkali were compared. Results showed that defluorination efficiencies of molten NaOH for the three PFCs were higher than the other three molten sodium salts at lower temperature. At 700°C, the defluorination efficiencies of PFOS and PFBS using molten NaOH reached to 84.2% and 79.2%, respectively, while the defluorination efficiency of PFOA was 35.3%. In addition, the temperature of molten salt, the holding time and the ratio of salt to carbon were directly proportional to the defluorination efficiency. The low defluorination efficiency of PFOA was due to the low thermal stability of PFOA, which made it difficult to be captured by molten salt.The weight loss range of PFOA was 75°C–125°C, which was much lower than PFOS and PFBS (400°C–500°C). From the perspective of gas production, fluorine-containing gases produced from molten NaOH-treated AC were significantly reduced, which means that environmental risks were significantly reduced. After molten NaOH treatment, the regenerated AC had higher adsorption capacity than that of pre-treated AC.     

Fabrication and characterization of lightweight aggregate prepared from steel mill sludge in one step

Journal of Material Cycles and Waste Management - The qualified green lightweight aggregate (LWA) was successfully prepared from steel mill sludge (SMS) and fly ash (FAS) in one step using the...     

Calcined Oil Shale Semi-coke for Significantly Improved Performance Alginate-Based Film by Crosslinking with Ca2+

Journal of Polymers and the Environment - Oil shale semi-coke (OSSC) is the residual solid waste after refining of oil shale, which principally contains organic matter and minerals. The common...     

Worldwide cases of water pollution by emerging contaminants: a review

Environmental Chemistry Letters - Water contamination by emerging contaminants is increasing in the context of rising urbanization, industrialization, and agriculture production. Emerging...     

Characteristics of plankton Hg bioaccumulations based on a global data set and the implications for aquatic systems with aggravating nutrient imbalance

• Hg bioaccumulation by phytoplankton varies among aquatic ecosystems. • Active Hg uptake may exist for the phytoplankton in aquatic ecosystems. • Impacts of nutrient imbalance on food chain Hg transfer should be addressed. The bioaccumulation of mercury (Hg) in aquatic ecosystem poses a potential health risk to human being and aquatic organism. Bioaccumulations by plankton represent a crucial process of Hg transfer from water to aquatic food chain. However, the current understanding of major factors affecting Hg accumulation by plankton is inadequate. In this study, a data set of 89 aquatic ecosystems worldwide, including inland water, nearshore water and open sea, was established. Key factors influencing plankton Hg bioaccumulation (i.e., plankton species, cell sizes and biomasses) were discussed. The results indicated that total Hg (THg) and methylmercury (MeHg) concentrations in plankton in inland waters were significantly higher than those in nearshore waters and open seas. Bioaccumulation factors for the logarithm of THg and MeHg of phytoplankton were 2.4–6.0 and 2.6–6.7 L/kg, respectively, in all aquatic ecosystems. They could be further biomagnified by a factor of 2.1–15.1 and 5.3–28.2 from phytoplankton to zooplankton. Higher MeHg concentrations were observed with the increases of cell size for both phyto- and zooplankton. A contrasting trend was observed between the plankton biomasses and BAF_MeHg, with a positive relationship for zooplankton and a negative relationship for phytoplankton. Plankton physiologic traits impose constraints on the rates of nutrients and contaminants obtaining process from water. Nowadays, many aquatic ecosystems are facing rapid shifts in nutrient compositions. We suggested that these potential influences on the growth and composition of plankton should be incorporated in future aquatic Hg modeling and ecological risk assessments.     

Agricultural non-point sources and their effects on chlorophyll-a in a eutrophic lake over three decades (1985–2020)

Environmental Science and Pollution Research - Erhai Lake is the second largest freshwater lake in Yunnan Province but suffers from the deterioration of water quality and agricultural non-point...     

Assessing economic sustainability and ecological efficiency with genuine progress indicator: a case study of the Yangtze River Delta from 2000 to 2018

To achieve urban sustainability, it is critical to enhance the environment, economy, and society simultaneously. This study adopted the revised genuine progress indicator (GPI) and ecological footprint (EF) to evaluate the ecological efficiency and economic sustainability of the Yangtze River Delta from 2000 to 2018. Spatial analysis was utilized to identify spatial autocorrelation. A total of 27 cities were then partitioned through k-means cluster analysis. The results showed that GPI and ecological efficiency improved rapidly, but economic sustainability showed a downward trend. GPI and GDP had a high degree of spatial correlation, especially in Suzhou-Wuxi-Changzhou Metropolitan Area. However, no spatial correlation existed between GPI and EF. The city with high GEE can reach 3000 $/gha, indicating the city consumed 1 global hectare to create $3000 of genuine economic growth. Shanghai, Hangzhou, and Taizhou were cities with the highest level of economic sustainability and ecological efficiency. The spatiotemporal characteristics of economic sustainability and ecological efficiency revealed in this study will provide theoretical guidance for alleviating ecological pressure and promoting economic sustainable development.

     

DSCAM-AS1 promotes cervical carcinoma cell proliferation and invasion via sponging miR-338-3p

Environmental Science and Pollution Research - Deregulated lncRNA DSCAM-AS1 expression was found in several tumors. However, mechanism and functional role of DSCAM-AS1 in cervical carcinoma remain...     

Generation estimation and material flow analysis of retired mobile phones in China

The generation estimation of retired mobile phones is launched with the sales and new method using the revised sales data and amount of the subscribers. Several assumptions have been made due to the insufficient sources of the data. The sales data of legal mobile phones are calculated with the authoritative and continuous official data. The sales data of smuggled and counterfeit mobile phones in China are also estimated based on the behavior data collected from the questionnaires. The results of generation estimation show that there are 636.52 million mobile phones retired in 2020, compared with 14.44 million in 1999 and several negative values in 2000, 2001, and 2008. The annual total mass of retired mobile phones in China escalated with the contributions of both the increasing generation amount and constant mass of the single unit. There are 50,921.60 ton of mobile phones retired in 2020 compared with 1155.20 ton in 1999, while the peak is 58,131.20 ton in 2019. There are 26,066.80 ton of retired mobile phones are stockpiled in 2020, while 16,152.40 ton and 8702.40 ton of retired mobile phones are reused as a whole unit and recycled, respectively. In the retired mobile phones that are recycled, 4600.50 ton material is recovered and 1216.50 ton components are reused, while 2885.40 ton residues need final disposal. The amount and dynamic characteristics of metals in the retired mobile phones are also calculated. Based on the results, several policy implications are made to improve sustainable management system of retired mobile phones in China.