pH值对“Fe^0．厌氧微生物”体系去除2，4，6-三氯酚过程的影响

考察了pH值对“Fe^0一厌氧微生物”体系降解2,4,6,一三氯酚（2,4,6．TCP）效果的影响,结果表明：pH值是影响“Fe^0-厌氧微生物”体系降解2,4,6-TCP效果的重要参数,初始pH值直接影响微生物活性和铁腐蚀,进而影响过程pH值变化,反过来又影响铁腐蚀和微生物活性,pH7．0～9．0的中性偏碱范围较适于厌氧微生物生长。Fe^0与微生物对目标污染物的降解具有协同促进作用,其协同促进机制表现在3方面：Fe^0与微生物对体系过程pH值具有互补调节作用,可将体系的pH值调节值适于微生物生长的中性范围;Fe^0腐蚀产生的Fe2＋和H2可为微生物代谢提供电子对和营养物质,从而促进生物还原脱氯的进行;Fe^0的腐蚀过程直接对氯代有机物还原脱氯,而微生物又可促进Fe^0腐蚀。     

改性活性炭对石煤提钒废水中低浓度NH_3-N和V等的吸附

为研究石煤提钒离交尾水的深度处理技术,利用质量分数为1%、5%和10%的过氧化氢溶液对ZWY15型活性炭进行改性,得到3种改性活性炭即1%AC、5%AC和10%AC;探讨其对该废水中低浓度的NH3-N、V等的吸附效果。实验结果表明：AC或改性AC的加入可使废水的碱度升高,随着吸附时间及吸附剂投加量的增加,升高幅度增大,且不同改性AC对废水碱度提高的幅度不同;相较于未改性活性炭,过氧化氢改性活性炭对V的吸附效果明显提高,去除率最大可提高30%,对NH3-N的去除率提升约11%;当投加量为60 g/L时,10%AC可使废水中V的浓度降低至1.88 mg/L,此时废水中Cr、Cd和Zn的浓度分别降低至0.006、0.010和0.036 mg/L,均低于《钒工业污染物排放标准》（GB26452-2011）所规定的排放限值。     

Assessing anthropogenic sources of mercury in soil in Wanshan Hg mining area, Guizhou, China

Long-term mining and smelting activities brought a series of environmental issues into soils in Wanshan mercury (Hg) mining area (WMMA), Guizhou, China. Several studies have been published on the concentrations of Hg in local soils, but a comprehensive assessment of the mass of Hg in soil induced by anthropogenic activities, as presented in this paper, has not been previously conducted. Three districts of WMMA were chosen as the study areas. We summarized previous published data and sampled 14 typical soil profiles to analyze the spatial and vertical distributions of Hg in soil in the study areas. The regional geologic background, direct and indirect Hg deposition, and Hg-polluted irrigation water were considered as the main sources of Hg contaminations in local soils. Furthermore, the enrichment factor (EF) method was applied to assess the extent of anthropogenic input of Hg to soil. Titanium (Ti) was chosen to be the reference element to calculate the EF. Generally, the elevated values of EF were observed in the upper soil layers and close to mine wastes. The total budget of Hg in soil contributed from anthropogenic sources was estimated to be 1,227 t in arable soil and 75 t in natural soil. Our data showed that arable soil was the major sink of anthropogenic Hg in the study area.     

The characteristics of waste Saccharomyces cerevisiae biosorption of arsenic(III)

Purpose

The potential of using waste Saccharomyces cerevisiae as adsorbent for the adsorption of As(III) from aqueous solution was assessed.

Methods

The biosorbent was characterized by Fourier transform infrared (FTIR) spectroscopy analysis. Various parameters including pH, biosorbent dosage, contact time, and temperature were systematically investigated.

Results and conclusions

The FTIR results of S. cerevisiae biomass showed that biomass has different functional groups, and these functional groups are able to react with metal ion in aqueous solution. Several biosorption isotherms were used to fit the equilibrium data, showing sorption to be monolayer on the heterogeneous surface of the biosorbent. The maximum biosorption capacity calculated using Langmuir model was found to be 62.908???g/g at pH?5.0, biosorbent dosage 5?g/L, contact time 240?min, and temperature 35?°C. The kinetic studies indicated that the biosorption process of the As(III) followed well the pseudo-second-order equation. The intraparticle diffusion and Richenberg models were applied to the data, and we found that the biosorption of As(III) was governed by film diffusion followed by intraparticle diffusion. The thermodynamics constants indicated that the biosorption of As(III) onto S. cerevisiae was spontaneous and endothermic under examined conditions. Biosorbent could be regenerated using 0.5?M NaOH solution, with up to 75?% recovery.     

Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres

A molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization using diclofenac (DFC) as a template. Binding characteristics of the MIP were evaluated using equilibrium binding experiments. Compared to the non-imprinted polymer (NIP), the MIP showed an outstanding affinity towards DFC in an aqueous solution with a binding site capacity (Q_max) of 324.8 mg/g and a dissociation constant (K_d) of 3.99 mg/L. The feasibility of removing DFC from natural water by the MIP was demonstrated by using river water spiked with DFC. Effects of pH and humic acid on the selectivity and adsorption capacity of MIP were evaluated in detail. MIP had better selectivity and higher adsorption efficiency for DFC as compared to that of powdered activated carbon (PAC). In addition, MIP reusability was demonstrated for at least 12 repeated cycles without significant loss in performance, which is a definite advantage over single-use activated carbon.     

一种多DTC基团重金属螯合剂的合成及处理含铜废水性能

合成了一种新的二硫代氨基甲酸盐类重金属螯合剂CDTC,并对其处理游离铜离子、EDTA络合铜和柠檬酸络合铜废水的性能进行了研究.实验结果表明:CDTC能直接去除已络合的铜,对不同形态的Cu2+去除率均达99%以上,处理后的废水中Cu2+剩余浓度达到我国<污水综合排放标准>(GB 8978-1996)一级标准;在废水pH=...     

表面活性剂洗脱含油污泥中的机油

采用表面活性剂洗脱法去除含油污泥中的机油,考察了4种表面活性剂对含油污泥的洗脱效果.实验结果表明:当以质量浓度为100 mg/L吐温80为洗脱剂、洗脱时间为4h、洗脱温度为25℃、溶液pH为6时,溶液中油质量浓度最大,为1 293.68 mg/L,此时含油污泥中油的洗脱率为86.25％;无机离子的加入总体上减小了表面活...     

我国太阳能光伏发电产业发展方向及产业政策

随着新世纪的到来,出于对环保和未来能源供应的考虑,可再生能源在世界能源消费中的比重逐渐加大。其中,太阳能光伏发电技术的发展和应用颇为世人所瞩目。本文从国有光伏产品市场特点出发,分析了国产光伏系统在市场竞争中的优势和劣势所在,指出了当前我国太阳能光伏发电系统企业在市场中缺乏竞争力的原因。在此基础上,提出相应的解决方案。     

偶氮染料定量结构-生物降解关系(QSBR)研究

利用量子化学原理剖析了偶氮染料的脱色机制,所得结果与文献中关于染料结构与脱色能力之间关系的结论基本一致,以脱色能力为染料生物降解能力的表征,建立了定量结构生物降解性模型,模型预测结果与实验结果基本吻合。     

卡鲁塞尔氧化沟反应器两相流PIV图像处理研究及实验分析

在单相数字粒子图像测速度(PIV)技术的基础上,研究了PIV两相流动的测试及图像处理方法.利用数学形态学的原理以及互相关法,对两相粒子图像进行标定、识别、区分和流场分析,编辑了相应的软件.并采用此技术对卡鲁塞尔氧化沟模型直道及弯道段二维液固两相流速进行测量,克服了传统点测量方法无法获取全场流动同步信息的缺陷,较好地反映了不同位置处固液流动分布的基本特性.结果表明,沟内径向流速远小于轴向,流速大小相差约一个数量级;同一断面上轴向流动分布是决定水力特性的主要因素;径向流速和水体动能是决定污泥沉积位置的主要因数,固相总体流速小于液相.