Predicting Pressure Loss for Pulse Jet Filters

The analysis of pressure loss characteristics for pulse jet filters suggests that the relationship between dust adhesion to the fabric and the opposing force generated by pulse jet action plays a major role in dust removal. Hence, fabric cleanability is examined in terms of the adhesion-cohesion forces bonding the dust to the fabric vs. the intensity and frequency of the dust dislodgement forces produced by the high energy air pulses. The effect of jet size and location, jet air volume, and the intensity (pressure) and duration of the jet pulses is related to operating pressure loss.

The mechanics of energy transfer from the jet pulse to the dustladen fabric are explored in terms of jet pressure, solenoid valve action, the ratio of delivered pulse air volume to bag (tube) volume, and the elastic and flex properties of the felt bags. Effective and actual fabric dust holdings before and after cleaning are discussed with respect to steady-state dust deposition and removal rates, and operating pressure losses. Finally, predictive equations are proposed for estimating pressure loss over a broad range of design and operating parameters.     

ESTIMATING TRANSMISSIVITY AND HYDRAULIC CONDUCTIVITY OF CHICOT AQUIFER FROM SPECIFIC CAPACITY DATA1

ABSTRACT: Specific capacity data obtained from Well Construction reports which are available from USGS offices, can provide useful estimates of tranamissivity (T), and hydraulic conductivity (K), of an aquifer. The Chicot Aquifer in Louisiana is one of the largest sources of fresh ground water in North America. Hydrologic data collected for the Chicot Aquifer indicate that specific capacity tests can be used in estimating local and regional values for T and K, if the Cooper-Jacob equation for transient flow is used with proper corrections for well loss and partial penetration. Where full scale pumping test data are scarce, specific capacity test data that are adequately distributed spatially can be used to map changes in T and K values and can be summarized statistically to indicate applicable regional values. A computer program called “TGUESS” which is available from International Ground Water Modeling Center, Holcomb Research Institute, was used in this study. The contour maps for T and K values are prepared for different well depth intervals to avoid wide variation of values.     

FUNDAMENTAL INVESTIGATION OF GRAVITY CURRENTS WITH VARYING DENSITY1

ABSTRACT: A one-dimensional, gradually varying, non-uniform, flow equation is developed to describe the movement of a variable density gravity current through a reservoir. A linearly decreasing underflow density function is used to investigate the effect of in-reservoir density reduction on typical gravity current flow profiles. Only two types of flow profiles are found to exist for varying density underflows: Type I profiles where the underflow asymptotically approaches a horizontal surface, and Type III profiles where the underflow vertically approaches critical depth. Type I profiles pass through a transitional depth as the underflow density approaches that of the upper layer. Results indicate that a reservoir can be segmented into four distinct spatial regions with well defined flow profile characteristics. The location of these regions allows the sketching of interfacial flow profiles along with identifying the location of transitional depth conditions. Transitional depth conditions are utilized as the logical starting point for Type I flow profile numerical computation. (KEY WORDS: density; fluid flow; reservoirs; hydraulics.)     

New and versatile optical-immunoassay instrumentation for water monitoring

This article is a review of new and versatile optical-immunoassay instrumentation for water monitoring developed through two European Union projects, RIver ANAlyser (RIANA) and Automated Water Analyser Computer Supported System (AWACSS). Both projects utilise immunoassay techniques to isolate the analytes and Total Internal Reflection Fluorescence (TIRF) to quantify them. Completed in 1999, the RIANA project developed a sensitive and cost-effective analytical system capable of simultaneous detection of multiple-analytes in real-world water samples. The AWACSS project has been in progress since 2001 and is developing rugged-but-sensitive instrumentation that will detect up to 30 analytes simultaneously, will operate unattended, and will have networking capability.     

The potential for combining indigenous and western knowledge in reducing vulnerability to environmental hazards in small island developing states

The benefits of indigenous knowledge within disaster risk reduction are gradually being acknowledged and identified. However, despite this acknowledgement there continues to be a gap in reaching the right people with the correct strategies for disaster risk reduction.This paper identifies the need for a specific framework identifying how indigenous and western knowledge may be combined to mitigate against the intrinsic effects of environmental processes and therefore reduce the vulnerability of rural indigenous communities in small island developing states (SIDS) to environmental hazards. This involves a review of the impacts of environmental processes and their intrinsic effects upon rural indigenous communities in SIDS and how indigenous knowledge has contributed to their coping capacity. The paper concludes that the vulnerability of indigenous communities in SIDS to environmental hazards can only be addressed through the utilisation of both indigenous and Western knowledge in a culturally compatible and sustainable manner.     

Pilot‐scale evaluation using bioaugmentation to enhance PCE dissolution at dover AFB national test site

An Interstate Technology and Regulatory Council (ITRC) forum was recently held that focused on six case studies in which bioremediation of dense nonaqueous‐phase liquids (DNAPLs) was performed; the objective was to demonstrate that there is credible evidence for bioremediation as a viable environmental remediation technology. The first two case studies from the forum have been previously published; this third case study involves a pilot‐scale demonstration that investigated the effects of biological activity on enhancing dissolution of an emplaced tetrachloroethene (PCE) DNAPL source. It used a controlled‐release test cell with PCE as the primary DNAPL in a porous media groundwater system. Both laboratory tests and a field‐scale pilot test demonstrated that bioaugmentation can stimulate complete dechlorination to a nontoxic end product and that the mass flux from a source zone increases when biological dehalorespiration activity is enhanced through nutrient (electron donor) addition and bioaugmentation. All project goals were met. Important achievements include demonstrating the ability to degrade a PCE DNAPL source to ethene and obtaining significant information on the impacts to the microbial populations and corresponding isotope enrichments during biodegradation of a source area. © 2007 Wiley Periodicals, Inc.     

METABOLIC RESPONSES OF AQUATIC BACTERIAL POPULATIONS TO SELECTED INSECTICIDES1

ABSTRACT: Indigenous bacterial populations from a fresh water reservoir were treated by adding five mg/1 Sevin or Malathion to the water at 23, 28, and 33 C. The degradation of Sevin was evidenced by the increased uptake of O₂ as measured by Warburg manometry. The principal degradation product of Sevin, 1-naphthol, appeared to stimulate metabolic activity of these populations to the same extent as the parent compound. The addition of Malathion to this system appeared, on the other hand, to suppress metabolic activity to some degree. Warburg manometry was shown to be a useful, rapid method for detecting effects of insecticides on aquatic microbial populations.     

THE RELATIONSHIP BETWEEN BEST MANAGEMENT PRACTICES AND RECEIVING-WATER STANDARDS1

ABSTRACT: An important enforcement question is, “What should be the relationship between ‘Best Management Practices’ (BMP) and receiving-water standards?” Nonpoint pollution dischargers are concerned about implementing a BMP program, only to find themselves in violation because receiving-water standards still have not been met. They are also concerned about the procedures a regulatory agency will utilize to determine the relative success of a BMP program. Successful management of nonpoint pollution requires that these concerns be addressed. Three alternative relationships have been developed. The recommended alternative is to implement the BMP program and use standards as a measure of the effectiveness of the program. Failure to achieve the standards would lead to a reevaluation of the BMP program. Enforcement activities against nonpoint dischargers would be restricted to the failure on their part to implement the previously agreed upon BMP program. Recommendations are also made as to measures regulatory agencies should take if their procedures to judge the relative success of a BMP program are to be technically and politically effective.     

FARMERS’ATTITUDES TOWARD GOVERNMENT INVOLVEMENT IN PREVENTING AGRICULTURAL NONPOINT SOURCE WATER POLLUTION1

ABSTRACT: Concern over the pollution of our lakes and streams has become a major issue in the United States. Sedimentation from sigricultural lands has been identified as a significant factor in water pollution. Some citizens suggest that government should force compliance with soil loss standards, while others suggest that we ask farmers to voluntarily comply. Related questions are “DO farmers think government should be involved in controlling erosion and protecting water quality?”“To what extent should government be involved?” What level of government should be involved? Federal? State? Local?“Why should pay for water quality projects?” Farmers from a small watershed in northeastern Indiana were interviewed before and after a major demonstration project. Their responses suggest that farmers feel that individual landowners should be responsible for controlling erosion and agricultural nonpoint source water pollution. However, over 60 percent of the study fanners indicated that the federal government should play an important role, in terms of both technical and financial assistance.