Algae Biomass Based Media for Poly(3-hydroxybutyrate) (PHB) Production by Escherichia coli

In addition to biodiesel production from algae, the production of other valuable bioproducts facilitates the development of an algae-based biorefinery platform. The goal of this study was to utilize the aqueous fraction from a novel algal wet lipid extraction procedure as the medium for the production of a bio product, poly(3-hydroxybutyrate) (PHB), via the growth of recombinant Escherichia coli. PHB yield was measured at 34 % of the E. coli dry cell mass, and was increased to 51 % when the algae aqueous medium was supplemented with glucose. While the addition of inorganic nutrients to the aqueous phase did not increase PHB production or growth of E. coli, growth of E. coli was observed to increase with the supplementation of carbon substrate (glucose). The addition of carbon rich waste to the aqueous fraction of wastewater-derived algae may in the future provide a sustainable alternative. Future research will be directed at evaluating this concept to develop a sustainable process for the production of bioplastics through an algae-based biorefinery platform.     

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles

Low-density polyethylene (LDPE) plastic is used to keep piled debris from silvicultural activities—activities associated with development and care of forests—dry to enable efficient disposal by burning. The effects of inclusion of LDPE in this manner on smoke emissions are not well known. In a combustion laboratory experiment, 2-kg mixtures of LDPE and manzanita (Arctostaphylos sp.) wood containing 0, 0.25, and 2.5% LDPE by mass were burned. Gaseous and particulate emissions were sampled in real time during the entire flaming, mixed combustion phase—when the flaming and smoldering phases are present at the same time—and during a portion of the smoldering phase. Analysis of variance was used to test significance of modified combustion efficiency (MCE)—the ratio of concentrations of fire-integrated excess CO₂ to CO₂ plus CO—and LDPE content on measured individual compounds. MCE ranged between 0.983 and 0.993, indicating that combustion was primarily flaming; MCE was seldom significant as a covariate. Of the 195 compounds identified in the smoke emissions, only the emission factor (EF) of 3M-octane showed an increase with increasing LDPE content. Inclusion of LDPE had an effect on EFs of pyrene and fluoranthene, but no statistical evidence of a linear trend was found. Particulate emission factors showed a marginally significant linear relationship with MCE (0.05 < P-value < 0.10). Based on the results of the current and previous studies and literature reviews, the inclusion of small mass proportions of LDPE in piled silvicultural debris does not appear to change the emissions produced when low-moisture-content wood is burned. In general, combustion of wet piles results in lower MCEs and consequently higher levels of emissions.

Implications:Current air quality regulations permit the use of burning to dispose of silvicultural piles; however, inclusion of low-density polyethyelene (LDPE) plastic in silvicultural piles can result in a designation of the pile as waste. Waste burning is not permitted in many areas, and there is also concern that inclusion of LDPE leads to toxic air emissions.     

Temporal and spatial trends of PCBs,DDTs, HCHs,and HCB in Swedish marine biota 1969–2012

In the 1960s, the Baltic Sea was severely polluted by organic contaminants such as PCBs, HCHs, HCB, and DDTs. Elevated concentrations caused severe adverse effects in Baltic biota. Since then, these substances have been monitored temporally and spatially in Baltic biota, primarily in herring (Clupea harengus) and in guillemot (Uria aalge) egg, but also in cod (Gadus morhua), perch (Perca fluviatilis), eelpout (Zoarces viviparous), and blue mussel (Mytilus edulis). These chemicals were banned in Sweden in the late 1970s/early 1980s. Since the start of monitoring, overall significant decreases of about 70–90 % have been observed. However, concentrations are still higher in the Baltic Sea than in, for example, the North Sea. CB-118 and DDE exceed the suggested target concentrations (24 µg kg^?1 lipid weight and 5 µg kg^?1 wet weight, respectively) at certain sites in some of the monitored species, showing that concentrations may still be too high to protect the most sensitive organisms.     

DNA damage induced by ultraviolet radiation in coral-reef microbial communities

Ultraviolet radiation (UVR) has been implicated in coral-bleaching processes and UVR may create stress to marine organisms by damage to DNA. Absorption of energy from UVB (280 to 320 nm) induces direct damage to DNA via cyclobutane pyrimidine dimer photoproduct-formation. We examined the extent of DNA damage created by UVR in coral reef microbial communities and whether the coral-surface microlayer (CSM) provides protection from UVR to the microorganisms found there. Diel patterns and depth profiles of UVR effects were examined in coral mucus (coral-surface microlayer, CSM) from Montastraea faveolata and Colpophyllia natans, and water-column samples of similar depths. UV-induced photodamage was determined using a radioimmunoassay specific for cyclobutane pyrimidine dimers (thymine dimers). Significant photodamage was detected in water-column and CSM samples, although the level of damage in CSM samples was consistently lower than in water-column samples collected from the same depth, suggesting the presence of photoprotective mechanisms within the CSM. Diel patterns of photodamage were detected in both water-column and CSM samples, but peak damage occurred earlier in the day for the CSM samples, suggesting differences in damage and repair kinetics between the water column and CSM. The results suggest that microorganisms within the CSM are afforded some protection from UVR stress and that changes in the amount of DNA damage in these organisms may be an indicator of changing UVR stress to corals. Received: 10 January 1997 / Accepted: 15 September 1997     

Respiratory health of road-side vendors in a large industrialized city

GOAL, SCOPE AND BACKGROUND: The literature reports a high prevalence of respiratory symptoms associated with exposure to motor vehicle exhaust emissions and people exposed to vehicle emissions are at risk of reduced lung function and cardiovascular performance. Although the effect of traffic emissions is a known risk to respiratory health, retailers are often situated along major roads in a busy urban environment to maximise customers. Shop assistants in an air-conditioned environment should be less exposed to traffic fumes and their lung function should be better preserved compared to 'unprotected' vendors exposed directly to vehicle emissions. The lung function of these two groups of workers has not previously been compared. The aims of this study are to determine if there is a difference in the concentration of respirable particles of diameter less than 10 micrometers (PM10) inside and outside air-conditioned shops along a busy major road; and to compare the lung function parameters, blood lead levels and respiratory symptoms between road-side vendors directly 'exposed' to traffic fumes and vendors working in 'protected' air-conditioned shops along the same road. METHODS: Roadside vendors (n=33) and adjacent shop assistants (n=31) were recruited for the study in a district known to have high emissions and pollution measures. All subjects were asked to complete a questionnaire providing the frequency of their respiratory symptoms. Spirometry pulmonary function tests were conducted and exhaled carbon monoxide levels (ECO), oxygen saturation and blood lead levels (BLL) were measured. PM10 level was concurrently measured in the subject's working environment. Pulmonary function data and ECO levels collected from a cohort of university staff aged > or = 30 years (n=92) at a university campus were included for comparison. RESULTS: The concentration of particulate matter (PM10) at the roadside (210 +/- 70 microg/m3) was significantly higher than inside the shops (130 +/- 40 microg/m3). There was no difference in lung function parameters or BLL between the groups, however the forced vital capacity of both groups of vendors was significantly lower than a 'control' cohort of academic institution personnel (n=92). DISCUSSION: This study illustrated that while the level of pollution improved with air conditioning, this may not be sufficient to prevent respiratory consequences. Our data suggests that a reduction in occupational exposure is not enough to protect these workers. CONCLUSIONS: Air-conditioned work environment is insufficient to protect the respiratory system against the adverse effects of exposure to vehicle emissions. RECOMMENDATIONS: The overwhelming effect of exposure during travel to and from work and at home cannot be underestimated. More stringent guidelines to control pollution appear necessary to protect the respiratory health of both shop-keepers and road-side vendors and further studies to explore the effect on respiratory health of the exposure to pollutants associated with commuting to and from work are warranted.     

Generation and characterization of diesel exhaust in a facility for controlled human exposures

An idling medium-duty diesel truck operated on ultralow sulfur diesel fuel was used as an emission source to generate diesel exhaust for controlled human exposure. Repeat tests were conducted on the Federal Test Procedure using a chassis dynamometer to demonstrate the reproducibility of this vehicle as a source of diesel emissions. Exhaust was supplied to a specially constructed exposure chamber at a target concentration of 100 microg x m(-3) diesel particulate matter (DPM). Spatial variability within the chamber was negligible, whereas emission concentrations were stable, reproducible, and similar to concentrations observed on the dynamometer. Measurements of nitric oxide, nitrogen dioxide, carbon monoxide, particulate matter (PM), elemental and organic carbon, carbonyls, trace elements, and polycyclic aromatic hydrocarbons were made during exposures of both healthy and asthmatic volunteers to DPM and control conditions. The effect of the so-called "personal cloud" on total PM mass concentrations was also observed and accounted for. Conventional lung function tests in 11 volunteer subjects (7 stable asthmatic) did not demonstrate a significant change after 2-hr exposures to diesel exhaust. In summary, we demonstrated that this facility can be effectively and safely used to evaluate acute responses to diesel exhaust exposure in human volunteers.     

Isolation of five Rubrobacter strains from biodeteriorated monuments

In the last few years, the microbial colonisation of mural paintings in ancient monuments has been attracting the attention of microbiologists and conservators. The genus Rubrobacter is commonly found in biodeteriorated monuments, where it has been reported to cause rosy discolouration. However, to date, only three species of this genus have been isolated, all from thermophilic environments. In this paper, we studied three monuments: the Servilia and Postumio tombs in the Roman Necropolis of Carmona (Spain), and Vilar de Frades church (Portugal), in search of Rubrobacter strains. In all cases, biodeterioration and the formation of efflorescences were observed, and five Rubrobacter strains were isolated. These isolates showed different physiology and migration in denaturing gradient gel electrophoresis, suggesting they might represent new species within this genus. The isolates reproduced some biodeterioration processes in the laboratory and revealed their biomediation in crystal formation.     

CAUSES OF UGHT AVI'ENUATION IN TAMPA BAY AND CHARLOTTE HARBOR,SOUTHWESTERN FLORIDA1

ABSTRACT: Vertical attenuation of photosynthetically active radiation (PAR) in clear waters of central Florida theoretically can vary almost 50 percent during a sunny summer day as a result of changing solar elevation. We used a simple formula to partially adjust the attenuation coefficient in Tampa Bay and Charlotte Harbor for changing solar elevation of the direct beam and then used multiple regression analysis to estimate the relative contribution of different water properties or constituents to the adjusted attenuation coefficient, k_adj. Color, on an average, was responsible for 18 percent of k_adj, chlorophyll a for 21 percent, nonchiorophyll suspended matter for 55 percent, and seawater for the remaining 6 percent. In both estuaries, k_adj increased with decreasing salinity as a result of freshwater runoff adding color, suspended matter, and nutrients. Nutrients affected attenuation by stimulating phytoplankton growth and increasing concentrations of chlorophyll a. Reduced nutrient loading to upper Tampa Bay (Hilisborough Bay) in the early to mid-1980's appears to have decreased concentrations of chlorophyll a, increased water clarity, and increased seagrass recolonization. Assuming other attenuating substances remained unchanged, the decrease in the average concentration of chlorophyll a from 30 to 15 μg L_?1 would correspond to an increase in the depth of light penetration necessary for seagrass survival (>10 percent incident light) from 1.0 to 1.5 m, which, on a relatively flat sea bed (slope of 2 m/km), would increase the area potentially available for seagram recolonization by 0.25 km²/km of shoreline.     

Bridging the gap: bringing together intentional and unintentional injury prevention efforts to improve health and well being

PROBLEM: Intentional and unintentional injury prevention efforts have traditionally been independent and non-integrated. Fostering collaboration between the sub-fields would enhance work within both sub-fields and advance injury prevention work as a whole. METHOD: A systematic assessment of similarities and differences between the sub-fields was performed, including an examination of relevant definitions and norms, research methods and findings, key risk and resiliency factors, and prevention strategies that would promote collaboration and better advance current prevention efforts. RESULTS/SUMMARY: Several areas exist in which injury prevention efforts could be coordinated or ideas and practices could be cross-applied, including training of practitioners, data collection and analysis, application of tools and methodologies, examination of risk and resiliency factors, and identification of funding sources and partners. IMPACT ON INDUSTRY: This paper delineates how intentional and unintentional injury prevention practitioners can more effectively collaborate to promote safer environments and further reduce incidence of injury. An integrated injury prevention approach could significantly impact the underlying contributors to both types of injury, allowing practitioners within both sub-fields to achieve greater outcomes through increased credibility, reduced duplication of efforts, more efficient use of resources, and unified injury prevention messages.