The use of sensory perception indicators for improving the characterization and modelling of total petroleum hydrocarbon (TPH) grade in soils

This paper proposes a multistep approach for creating a 3D stochastic model of total petroleum hydrocarbon (TPH) grade in potentially polluted soils of a deactivated oil storage site by using chemical analysis results as primary or hard data and classes of sensory perception variables as secondary or soft data. First, the statistical relationship between the sensory perception variables (e.g. colour, odour and oil–water reaction) and TPH grade is analysed, after which the sensory perception variable exhibiting the highest correlation is selected (oil–water reaction in this case study). The probabilities of cells belonging to classes of oil–water reaction are then estimated for the entire soil volume using indicator kriging. Next, local histograms of TPH grade for each grid cell are computed, combining the probabilities of belonging to a specific sensory perception indicator class and conditional to the simulated values of TPH grade. Finally, simulated images of TPH grade are generated by using the P-field simulation algorithm, utilising the local histograms of TPH grade for each grid cell. The set of simulated TPH values allows several calculations to be performed, such as average values, local uncertainties and the probability of the TPH grade of the soil exceeding a specific threshold value.     

Modeling of Cr contamination in the agricultural lands of three villages near the leather industry in Kasur,Pakistan, using statistical and GIS techniques

Kasur is one of the hubs of leather industry in the Punjab, Pakistan, where chrome tanning method of leather processing is extensively being used. Chromium (Cr) accumulation levels in the irrigation water, soil, and seasonal vegetables were studied in three villages located in the vicinity of wastewater treatment plant and solid waste dumping site operated by the Kasur Tanneries Waste Management Agency (KTWMA). The data was interpreted using analysis of variance (ANOVA), clustering analysis (CA), and principal component analysis (PCA). Interpolated surface maps for Cr were generated using the actual data obtained for the 30 sampling sites in each of the three villages for irrigation water, soil, and seasonal vegetables. The level of contamination in the three villages was directly proportional to their distance from KTWMA wastewater treatment plant and the direction of water runoff. The highest level of Cr contamination in soil (mg kg^?1) was observed at Faqeeria Wala (37.67), intermediate at Dollay Wala (30.33), and the least in Maan (25.16). A gradational variation in Cr accumulation was observed in the three villages from contaminated wastewater having the least contamination level (2.02–4.40 mg L^?1), to soil (25.16–37.67 mg kg^?1), and ultimately in the seasonal vegetable crops (156.67–248.33 mg kg^?1) cultivated in the region, having the highest level of Cr contamination above the permissible limit. The model used not only predicted the current situation of Cr contamination in the three villages but also indicated the trend of magnification of Cr contamination from irrigation water to soil and to the base of the food chain. Among the multiple causes of Cr contamination of vegetables, soil irrigation with contaminated groundwater was observed to be the dominant one.     

The assessment of the relationship between various waterscapes and outdoor activities: Edirne,Turkey

The environment is very important in terms of the behaviours and actions of human beings, and activity–environment correlation is used frequently in outdoor arrangements. The environment must meet the requirements and expectations of society. Outdoor activities are the activities that contribute to the well-being of human beings in physical (heartbeat, respiration, blood pressure, etc.) (Ulrich, Journal of Environmental Psychology 11:210–230, 1991), psychological (fear, anxiety, depression, loneliness, stress, etc.) (Marcus and Barnes 1999) and behavioural (insomnia, nervousness, restlessness, passivity, etc.) (Ulrich 1999) terms. It is known that human beings are affected significantly by the environments they are in, and more importantly, it is known that the environment they are in affects their happiness status. The causes of this effect are the features and appearances of the spatial elements and components that mainly make up such environments. One of the elements that is used frequently in landscape is water. If one examines designed or natural open spaces, it may be observed that water has very distinctive features. Dynamic (in the form of a leak, with intense flow rate, cascade, foamy, squirting, jet, graded, etc.) and still water elements may be used with sculptures, plants, rocks and elevations (on land). This study aims to reveal which age groups of students enjoy the different types of activities with regards to water features and emotional associations that motion and characteristics of water bring out in human beings and also to reveal the water preferences of human beings, including their reasons for such preference. Thus, 20 different water compositions located in Edirne Province were selected, and in 2-min camera reels, the students of various age groups assessed water with various characteristic features via a survey. As a result, it was revealed that human beings from various age groups wish to perform different activities with water elements having distinctive characteristic features, and the types of water elements that are subject to various age groups’ like and dislike were determined. Kruskal–Wallis test was used during testing the effect of age differences. Chi-square analysis was used in order to examine the effect of age differences on preferences with regards to the activities that shall be performed at locations that include utilization of various water elements. The results reveal that while the use of water should be allowed in landscaping, selections regarding the elements of these water features should be made based on the type of activity and the age group of users in relation to the location.     

Depth-related shift in life history strategies of a brooding and broadcasting deep-sea asteroid

Combining field and laboratory work, this study investigated the reproductive cycle, aggregative behavior, spawning periodicity, development and early growth of the sea star Henricia lisa living at bathyal depths off eastern Canada. Marked differences were found between individuals from ~1,300 and ~600 m deep. The former had a male biased sex ratio and an aperiodic reproductive cycle, whereas the latter displayed an equal sex ratio and a biannual breeding pattern. Furthermore, the maximum size was larger and female fecundity roughly five times higher in shallower compared to deeper populations. In the tanks, aggregative behavior was recorded twice a year during the summer and winter breeding periods. The onset of aggregations and spawning coincided with a temperature of 3–4°C. Males spawned first and females typically responded inside 30–60 min. Between 12 and 20 eggs were retained to be brooded under the arched arms of the female, whereas the remainder were broadcasted and developed without parental care. The fertilized eggs underwent a first cleavage after 12 h, reached the brachiolaria stage in 1 month, became juveniles within 3–4 months and reached ~ 4 mm in diameter after 14–17 months of growth. The embryos and juveniles developed at the same rate whether brooded or not, and development of winter cohorts was typically slower due to lower prevailing temperatures. This study of H. lisa provides the first evidence of lecithotrophy in a seasonally breeding deep-sea echinoderm and of brooding in a deep-sea asteroid.     

Noise disturbance caused by outdoor activities�� a simulated-environment study for Ali Sami Yen Stadium, ?stanbul

Negative effects of noise on individuals, the inevitable result of urbanization, have become a significant urban problem in our day. Introduction of an approach to the noise problem on an urban-planning scale lightens the burden of measures required to be taken against noise at the stages of regional and developmental planning. Stadiums, which should be also evaluated from the point of noise problem when planning decisions are made on the urban planning scale, may cause very serious problems differing depending on the region they are located in. In this article, various dimensions of the noise problem caused by stadiums have been exemplified by making an assessment on Ali Sami Yen football stadium located in Mecidiyeköy district which is among important residential and commercial centres of ?stanbul or Turkey. When the simulation results obtained for ordinary days and match days are evaluated, it has been found out that the people living in the area are exposed to noise levels substantially exceeding the acceptable values. Results of the survey conducted in the area have clearly revealed the existence of noise problem, too.     

An Experiment in Participative Environmental Decision Making

Summary The paper presents a method of participatory decision-making involving the authorities at local level, experts and the public. It studies how to solve the problems caused by the heterogeneity of the parties taking part in the decision-making process. The method builds on mutual learning and consideration among the participants following a systematic approach led by a moderator. The method was tested at a workshop simulating a real-life situation. The test case studied at the workshop was the problem of identifying the best site for a low and intermediate level radioactive waste repository among three alternatives. The learning phase was the Krško Nuclear Power Plant cooling problem. The results show that the participants were able to reach agreement on the prioritisation of the alternatives and to end up with suprisingly complex and fully reasonable decision models. We believe that this was achieved particularly due to the well defined procedure that guided the decision-making process, and the ability of all participants to see the influence of their views on the decision model.     

Analysis of the recycling system for aluminum cans,focusing on collection,transportation, and the intermediate processing methods

In this article, the systems for the collection and intermediate processing of used beverage cans (UBCs) are compared and analyzed, focusing on the time taken and the cost of processing, the energy consumption, and the emissions of CO₂, SO _x , and NO _x , during the process. We found that cases where the UBCs were crushed in the discharging process gave better results, and how the UBCs were collected was the most important factor. It was more desirable to treat UBCs in one place than in two places. When the transportation distance was longer, the pressed form of UBCs was more convenient. When the transportation distance was short, the original form, the crushed form, and the shredded form of UBCs were all suitable. That is, the contribution of the transportation process to the evaluation was large when the transport distance was long, and the contribution of the treatment process was large when the transport distance was short.     

Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.