Evaluation of hexavalent chromium removal in a continuous biological filter with the use of central composite design (CCD)

Hexavalent chromium is frequently found in industrial effluents as a result of the industrial applications of this compound and its anti-corrosive features. However, hexavalent chromium is extremely toxic, and its discharge in water is regulated, with a maximum limit of 0.1 mg/L in accordance with legislation established by CONAMA-Brazil (no. 397, April 3, 2008). To achieve lower discharge values, it is necessary to reduce from Cr(VI) to Cr(III), which is less toxic, and an economic alternative involves biological removal of this compound. Residence time distributions (RTDs) were measured to evaluate the behavior of actual biofilter operation conditions in a biofilter flow. The medium residence time distributions used were 8 and 24 h (recommended by the legislation). To optimize this process, a central composite design was used, considering the initial chromium concentration and pH as the independent variables and the removal of hexavalent chromium as the response. The boundary curves and surface response showed optimal behavior at 3.94 mg/L [Cr(0)] and a pH of 6.2. The removal process of hexavalent chromium is mathematically described by the Michaelis-Menten kinetic model. This model appropriately represents the variation of chromium concentration along the bioreactor.     

Societal risk assessment of major hazard installations using QuickRisk

QuickRisk is a quantitative risk assessment tool developed at the Health and Safety Laboratory for use in assessing societal risk around onshore major hazard installations to inform land-use planning decisions. It uses release scenario information, parameterised consequence models, weather data, and population data from the National Population Database (NPD).This paper describes enhancements to the NPD methodology to include workplace populations. It describes the novel numerical, graphical and geographical representations of societal risk produced by QuickRisk. F–N data are analysed in terms of scenario FN curves and Delta PLL vs. N curves, where PLL is potential loss of life. The Delta PLL curves could be useful for comparison of FN curves against FN criterion lines or other FN data on a PLL basis. Geographical representations generated from PLL density maps show: the distribution of PLL dominating release scenarios or the percentage of risk contributed by the PLL-dominant release scenario, the maximum number of fatalities associated with the worst-case event, and the associated release scenario. Geographical representations are also generated of the maximum population that would meet a PLL density criterion, and the relative population change that would match a given PLL density criterion.These novel representations of societal risk could be useful for more effective communication between stakeholders on the risk levels in the vicinity of major hazard installations.     

Development of a PCR protocol for the detection of Escherichia coli O157:H7 and Salmonella spp. in surface water

Escherichia coli O157:H7 and Salmonella are pathogenic microorganisms that can cause severe gastrointestinal illness in humans. These pathogens may be transmitted in a variety of ways, including food and water. The presence of Salmonella and E. coli O157:H7 in surface waters constitutes a potential threat to human health when used for either drinking or recreation. As with most waterborne pathogens, Salmonella and E. coli O157:H7 are difficult to detect and enumerate with accuracy in surface waters due to methodological limitations. The aim of this study was to develop a protocol for the detection of Salmonella spp., E. coli O157:H7 and E. coli virulence genes (stx ₁, stx ₂ and eae) in water using a single enrichment step and PCR. In spiked water samples, PCR results showed high sensitivity (<3 CFU/L) for both microorganisms. The protocol developed in this study has been applied in different surface waters in association with microbiological and physical analysis. The frequency of PCR positive samples was 33% for Salmonella and 2% for E. coli O157:H7 producing intimin (eae) and Shiga-like toxin I (stx ₁). Moreover, the finding of amplicons corresponding to eae and stx ₁ genes in the absence of E. coli O157:H7 suggested the possible presence of other pathogenic bacteria that carry these genes (e.g. EHEC, Shigella strains). The results obtained showed that the developed protocol could be applied as a routine analysis of surface water for the evaluation of microbiological risks.     

Viscoelastic Characterization and Degradation Stability Investigation of Poly(butylene-adipate-co-terephthalate) – Calcium-Phosphate Glass Composites

Journal of Polymers and the Environment - In this work new biodegradable composite materials based on poly(butylene-adipate-co-terephthalate) (PBAT) reinforced with water-soluble calcium-phosphate...     

Effect of heavy metals on the production of several laccase isoenzymes by Trametes versicolor and on their ability to decolourise dyes

The white-rot fungus Trametes versicolor growing in submerged culture on a basal medium, with barley bran as a carbon source, produced two laccase isoenzymes LacI and LacII. The addition of metal ions to the culture medium was performed to improve the total laccase activity and to determine the effect on the production of laccase isoenzymes. From all the tested metals, only Cu2+ increased laccase activity (up to 12-fold with respect to control cultures) and T. versicolor in presence of all metals produced the two isoenzymes in different proportion with ratios of activity (LacI/LacII) varying between 0.11 and 0.51. This factor played an important role in the decolourisation of the textile dye Indigo Carmine.     

The influence of climate and dam construction on the Ibera wetlands, Argentina

The purpose of this work is to assess the impact on the Esteros del Ibera wetland ecosystem caused by the Yacyreta dam, a large hydroelectric power plant on the Parana River, Argentina, in comparison to other factors of environmental change. The project of the dam started around 1970. The power plant began operating in 1994. In 1989, the neighboring Ibera wetland ecosystem showed a substantial increase in the water level for which several different causes were conceivable, including climate change and the dam construction. We analyzed all existing hydrometeorological data and studied other changes that were observed in this ecosystem. A water balance model was used to analyze different scenarios. Increased groundwater inflow, generated since the construction of the dam, appears to be affecting the wetland more than any other factor. The study has implications for the assessment of global and regional consequences of building dams.

Are CO2 Emissions Stationary After All? New Evidence from Nonlinear Unit Root Tests

Environmental Modeling & Assessment - This study applies a large battery of state-of-the-art nonlinear unit root tests to examine the stationarity properties of carbon dioxide emission series...