昆明市医疗废物的焚烧处理

医疗废物含有大量传染性物质,导致污染的可能是各种病菌和寄生虫卵等,是高度危险废物,必须进行无害化处置.针对昆明市医疗废物的现状,根据国内外先进的管理和处理模式,结合昆明市实际情况,采用焚烧实验炉焚烧昆明市医疗废物,医疗废物无须进行预处理,能直接进行焚烧.实验证明,高温焚烧可彻底清除医疗废物中的病菌及恶臭气体,保证医疗废物的无害化处理.     

国Ⅲ轿车排放达标背景下的排气系统改进措施

本文针对国Ⅲ汽车排放标准对发动机起动阶段的高标准排放要求,从尽快提高三元催化器起燃温度角度出发,探讨了排气系统的改进措施。     

利用GPS-RTK技术进行既有线曲线整正测量研究

既有线曲线整正测量是铁路既有线提速改造和工务部门大修设计的主要任务之一。需要改造的既有铁路一般均为繁忙干线,并行车密度较高。传统的测量方法是将测量仪器安置在线路上,这样不仅在作业过程中受行车干扰,作业效率也不够高,而曲线地段通视条件差,作业难度是相当大的。同时,作业人员的安全问题也变得十分突出。笔者提出采用先进的GPS-RTK技术,对既有线曲线整正进行测量。采用该技术不仅能克服气候条件的限制,而且能以较高的频率,较高的精度测定互不通视的各被测点的坐标,克服了传统的作业方法要求置镜点与被测点之间必须通视、作业受天气影响、存在误差累积、内业计算工作量大等缺陷。该法在保证作业人员安全的前提下大大提高作业效率。     

低浓度臭氧在含钴盐硅胶上的吸附研究

常压下对含钴盐硅胶进行低浓度臭氧的吸附实验，吸附达到饱和后用氮气作为载气加热解吸。结果显示，含钴盐的硅胶对臭氧具有较强的吸附能力；臭氧解吸量随着解吸温度的上升而增加；吸附了臭氧的含钴硅胶粒子在常温(313．15K)下可在60min内不问断解吸出臭氧。     

对实验室污染问题的思考和建议

分析了目前实验室存在的污染种类及危害,阐明实验室是一种不容忽视的污染源,且污染种类复杂,毒害较大.提出实验室污染防治措施.     

企业逆向物流与循环经济立法之联系

逆向物流给企业带来效益的同时,也带来了生态物流的理念.逆向物流涉及了经济与生态环境两大系统,显现出了自身的特点与积极因素.逆向物流充分体现了循环经济发展之宗旨.加速循环经济的立法,并以相应立法来推动企业尽快实施物流活动是至关重要的.     

城镇供热管道隐患辨识研究

近年来,因供热管道老化腐蚀、外部自然环境、施工活动等导致的事故时有发生,给居民的冬季供暖造成了严重的危害和影响。本文在分析供热管道自身安全特性的基础上,运用事故树等系统安全分析方法对供热管道隐患进行辨识分析,结合供热管道影响因素明确隐患辨识重点,并针对隐患排查内容及手段等提出对策建议,以支撑供热管道单位更系统、更科学的开展隐患排查治理工作,保障管线的安全运行。     

The Trump administration’s decision to withdraw the United States from the Paris Climate Agreement

<正>After years of complex and challenging negotiations,197countries reached a landmark climate agreement during the 2015 United Nations Framework Convention on Climate Change summit in Paris(the 21st Conference of the Parties(COP21)).Under the Paris Agreement,countries announced actions they plan to take to mitigate their greenhouse gas emissions known as Intended Nationally Determined Contributions.Although there is     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

Using geographically temporally weighted regression to assess the contribution of corruption governance to global PM2.5

Environmental Science and Pollution Research - In the face of the global haze crisis, exploring the driving force of political factors for controlling minute atmospheric particles has become...